불완전 발달 유체 유동을 고려한 MR댐퍼 착륙장치 모델링

이효상,장대성,황재혁 항공우주시스템공학회 2021 항공우주시스템공학회지 Vol.15 No.1

반능동형 MR댐퍼 착륙장치는 MR유체가 환형 유로를 지날 때 유체감쇠력 및 자장 제어 감쇠력을 발생시키는 댐퍼이다. 환형 유로를 지나는 MR 유체의 경우 필연적으로 불완전 발달 유동이 발생하게 되어, 이는 유체 감쇠력을 포함하는 댐퍼 내력 계산에 오차를 발생시키는 원인이 된다. 이로 인해 댐퍼 구조적 파라미터 설계 및 제어 이득 선정이 부정확해지며, 착륙장치의 동특성 및 충격흡수성능 저하를 초래하게 된다. 본 논문에서는 MR댐퍼 환형 유로의 입구영역에서 발생하는 추가적인 감쇠력을 고려한 MR댐퍼 착륙장치의 수학적 모델을 유도하였다. 본 논문에서 유도한 수학적 모델링을 MR댐퍼 착륙장치의 설계 및 최적화 과정에 적용한다면 좀 더 정확한 내력 예측으로 우수한 성능의 MR댐퍼 착륙장치를 설계할 수 있을 것으로 판단된다. A semi-active MR damper landing gear is a damper that generates a fluid damping force and a magnetic field control damping force when the MR fluid passes through annular flow paths. In the case of MR fluid passing through annular flow paths, an incompletely developed flow inevitably occurs, causing an error in calculating damper inner forces including the fluid damping force. This error results in an inaccurate design of damper structural parameters and control gain selection, resulting in deterioration of dynamic characteristics and shock absorption performance of the landing gear. In this paper, we derived a mathematical model of an MR damper landing gear considering additional damping force generated in the entrance region of annular flow paths of the MR damper. If the mathematical modeling derived from this paper is applied to the design and optimization process of an MR damper landing gear, excellent performance of the MR damper landing gear is expected.

MR댐퍼 기반의 스마트 수동제어 시스템

조상원,조지성,김춘호,이인원 한국지진공학회 2005 한국지진공학회논문집 Vol.9 No.1

본 연구에서는 위의 어려움을 해결하기 위해, 스마트 수동제어 시스템을 제안하였다. 스마트 수동제어 시스템은 MR댐퍼와 EMI시스템으로 구성되며, EMI시스템은 영구자석과 솔레노이드 코일로 이루어진다. EMI시스템은 MR댐퍼의 왕복운동에너지를 전기에너지로 변환하므로, 스마트 수동제어 시스템은 외부 전원 없이 외부하중에 따라 댐퍼의 점성을 바꾸는 적응성을 갖는다. 따라서 간단하고 효율적인 장치로써, 대형토목구조물에 적용 가능하다. 이의 확인을 위해 예제를 통한 수치해석을 수행하였으며, 스마트 수동제어 시스템이 강진에 대해서는 기존의 반능동 제어 MR댐퍼 시스템 보다 우수한 성능을 보인다. Magnetorheological(MR) dampers are one of the most promising semi active control devices, because they have advantages such as small power requirement, reliability, and low price to manufacture. To reduce the responses of structures with MR dampers, a control system including power supply, controller, and sensors is required. However, when a mount of MR dampers are used to a large?scale civil structure such as cable stayed bridges, the control system becomes complex. Therefore, it is not easy to install and maintain the MR damper based control system. To resolve above difficulties, This paper proposes a smart passive system that consists of a MR damper and an electromagnetic induction(EMI) system. According to the Faraday’s law of induction, EMI system that is attached to the MR damper produces electric energy. The produced energy is supplied to the MR damper. Thus, the MR damper with EMI system does not require any power at all. Furthermore, the induced electric energy is proportional to external loads like earthquakes, which means the MR damper with EMI system is adaptable to external loads without any controller and corresponding sensors. Therefore, it is easy to build up and maintain the proposed smart passive system.

사장교에 장착된 MR 댐퍼의 비용효율성 평가 및 최적설계 연구

박원석,함대기,고현무,박관순 한국지진공학회 2006 한국지진공학회논문집 Vol.10 No.6

지진응답 제어를 위하여 사장교 구조물에 장착된 준능동MR 댐퍼의 경제적 효율성 평가기법을 제안하였으며, 다양한 지반운동 특성에 대하여 비용효율성을 극대화하는 MR 댐퍼의 최적용량에 대한 분석을 수행하였다. MR 댐퍼의 비용효율성 평가를 위하여 생애주기비용 개념을 적용하였으며, 생애주기비용을 이루는 비용항목 중 손상비용의 기대값을 평가하기 위하여 지진재해로 인한 사장교의 파괴확률을 추정하였다. 사장교의 파괴로 인한 직 간접 손상비용의 규모를 매개변수로 하여 비용효율성을 평가하였다. 비용효율성 평가지수는 MR 댐퍼의 장착으로 인한 추가 투자비용과 사장교 구조물의 손상비용으로 이루어진 함수로서, 탄성받침이 사용된 기존의 설계에 대한 경제적 효율성을 나타내도록 정의하였다. 사장교의 지진응답 제어를 위하여 장착된 MR 댐퍼는 경제적으로 효율적인 대안인 것으로 나타났다. 지반운동의 특성과 손상비용 규모에 대한 MR 댐퍼의 최적 용량을 분석한 결과, 지진위험도 및 손상비용 규모가 커짐에 따라 가장 높은 비용효율성을 가지는 MR 댐퍼용량이 증가하는 것을 확인할 수 있었다. A method is presented for evaluating the economic efficiency of a semi-active magneto-rheological (MR) damper system for cable-stayed bridges under earthquake loadings. An optimal MR damper capacity maximizing the cost-effectiveness is estimated for various seismic characteristics of ground motion. The economic efficiency of MR damper system is addressed by introducing the life-cycle cost concept. To evaluate the expected damage cost, the probability of failure is estimated. The cost-effectiveness index is defined as the ratio of the sums of the expected damage costs and each device cost between a bridge structure with the MR damper system and a bridge structure with elastic bearings. In the evaluation of cost-effectiveness, the scale of damage cost is adopted as parametric variables. The results of the evaluation show that the MR damper system can be a cost-effective design alternative. The optical capacity of MR damper is increased as the seismic hazard becomes severe.

회전형 MR 댐퍼를 이용한 반능동 현가장치의 퍼지 스카이-훅 제어

조정목(Jeongmok Cho),조중선(Joongseon Joh) 한국지능시스템학회 2007 한국지능시스템학회논문지 Vol.17 No.5

최근 고층건물의 방진시스템 및 자동차의 현가장치 분야에 MR 유체를 이용한 반능동 진동제어에 관한 연구가 활발히 진행되면서 MR 유체의 밸브모드 특성을 이용한 선형 MR 댐퍼가 널리 사용되고 있다. 그러나 전단모드를 이용한 회전형 MR 댐퍼에 관한 연구는 초기단계에 머물고 있다. 본 연구에서는, 주행로봇의 무한회전형 액츄에이터용 회전형 댐퍼의 진동제어에 관한 연구를 수행하였으며, 퍼지 로직을 기반으로한 회전형 MR 댐퍼용 진동제어 알고리즘을 제안하였다. 퍼지제어기의 입출력 이득과 멤버쉽 함수의 모양은 유전자 알고리즘을 이용하여 조정하였다. 시뮬레이션 결과는 MR 댐퍼에 충격력이 가해질 때 퍼지 스카이-훅 제어 성능을 보여준다. Recently, a number of researches about linear magnetorheological(MR) damper using valve-mode characteristics of MR fluid have sufficiently undertaken, but researches about rotary MR damper using shear-mode characteristics of MR fluid are not enough. In this paper, we performed vibration control of shear-mode MR damper for unlimited rotating actuator of mobile robot. Also fuzzy logic based vibration control for shear-mode MR damper is suggested. The parameters, like scaling factor of input/output and center of the triangular membership functions associated with the different Linguistic variables, are tuned by genetic algorithm. Simulation results demonstrate the effectiveness of the fuzzy-skyhook controller for vibration control of shear-mode MR damper under impact force.

MR 댐퍼의 제어 효과 향상을 위한 Cutout 피스톤 적용에 관한 연구

김종혁(Kim, Jong-Hyuk),배재성(Bae, Jae-Sung),황재혁(Hwang, Jai-Hyuk),홍예선(Hong, Yeh-Sun) 한국소음진동공학회 2011 한국소음진동공학회 논문집 Vol.21 No.6

This paper is concerned with a study on the control effect of the MR damper using the cutout piston. The MR damper has passive damping force by the oil pressure and controllable damping force by the magnetic effect. As the velocity of the MR damper's piston increases the passive damping force increases and the ratio of the controllable damping force to the total damping force is decreased. Consequently, the control performance of the MR damper is reduced according to the increase of the velocity. In this paper, the cutout piston concept is applied to the MR damper to improve MR damper's control performance by reducing the passive damping effect. The MR damper with the cutout piston has been designed and manufactured and its hydraulic and electromagnetic analysis has been performed to predict its performance. The control performances of the MR damper with the cutout piston are verified through the comparison of experiment results and simulation results.

MR 댐퍼의 전자기적 설계

남윤주(Yun-Joo Nam),박명관(Myeong-Kwan Park) 대한기계학회 2007 대한기계학회 춘추학술대회 Vol.2007 No.10

This paper is concerned with an electromagnetic design methodology for the magneto-rheological (MR) damper. In order to improve the performance of the MR damper, the magnetic field should be effectively supplied to the MR fluid. Therefore, it is important that magnetic circuit consisting of the MR fluid, the ferromagnetic material for magnetic flux path, and the electromagnetic coil is well designed. For this purpose, two effective approaches are proposed: one is to shorten the magnetic flux path by removing the unnecessary bulk of the yoke in order to improve the static characteristic of the MR damper, and the other is to increase the magnetic reluctance of the ferromagnetic material by minimizing its cross-sectional area through which the magnetic flux passes in order to improve the dynamic and hysteretic characteristics. The effectiveness of the proposed design methodology is verified through magnetic analysis and a series of basic experiments.

MR 댐퍼를 이용한 헬기 착륙장치 반능동제어

황재업(Jae-Up Hwang),황재혁(Jae-Hyuk Hwang),배재성(Jae-Sung Bae),현영오(Young-O Hyun),임경호(Kyoung-Ho Lim),김두만(Doo-Man Kim),김태욱(Tae-Wook Kim) 한국항공우주학회 2008 韓國航空宇宙學會誌 Vol.36 No.4

본 논문에서는 MR 댐퍼를 헬기 착륙장치 완충기에 적용하여 반능동형 헬기 착륙장치 시스템을 설계하고, 헬기 착륙장치의 반능동제어를 수행하였다. MR 유체는 자기장 내에서는 유체의 물성치가 바뀌게 되는 빙햄거동을 시뮬레이션 하여 MR 댐퍼의 성능을 평가하였다. MR 댐퍼 내에서 자기장을 설계하고, 자기장의 변화에 대해 내부감쇠력의 변화를 고찰하고 자기장에 따른 착륙장치의 거동을 평가하였다. 또한 반능동형 헬기 착륙장치에 제어 알고리즘을 적용하여 착륙특성 성능을 해석하였고, 수동계의 착륙특성과 반능동형의 착륙특성을 비교하였다. In this paper, the semi-active control of a helicopter landing gear using magneto-rheological(MR) damper is studied. A dynamic model of the MR damper is formulated by incorporating magnetic field-dependent Bingham properties of the MR fluid. The electromagnet of the MR damper is designed and its magnetic field is analyzed using a commercial finite element code. The damping characteristics of MR damper by changing the intensity of the magnetic field are investigated and the dynamic responses of the helicopter landing gear with MR damper are simulated. The semi-active control of the helicopter landing gear is simulated by implementing a sky-kook control algorithm and its performance is evaluated comparing to the passive control.

MR 댐퍼를 이용한 대형 버스 현가장치의 반능동 제어

윤호상(Hosang Yoon),문일동(Ildong Moon),김재원(Jaewon Kim),오재윤(Chaeyoun Oh),이형원(Hyungwon Lee) 한국생산제조학회 2012 한국생산제조학회지 Vol.21 No.4

In this work, the semi-active control of a large-sized bus suspension system with an MR damper was studied. An MR damper model that can aptly describe the hysteretic characteristics of an MR damper was adopted. Parameter values of the MR damper model were suitably modified by considering the maximum damping force of a passive damper used in the suspension system of a real large-sized bus. In addition, a fuzzy logic controller was developed for semi-active control of a suspension system with an MR damper. The vertical acceleration at the attachment point of the MR damper and the relative velocity between sprung and unsprung masses were used as input variables, while voltage was used as the output variable. Straight-ahead driving simulations were performed on a road with a random road profile and on a flat road with a bump. In straight-ahead driving simulations, the vertical acceleration and pitch angle were measured to compare the riding performance of a suspension system with a passive damper with that of a suspension with an MR damper. In addition, a single lane change simulation was performed. In the simulation, the lateral acceleration and roll angle were measured in order to compare the handling performance of a suspension system using a passive damper with that of a suspension system using an MR damper.

소형 MR 댐퍼의 모델링 및 진동제어

이종우(Jong-Woo Lee),성민상(Min-Sang Seong),우제관(Je-Kwan Woo),최승복(Seung-Bok Choi) 한국소음진동공학회 2012 한국소음진동공학회 학술대회논문집 Vol.2012 No.10

This paper presents a new small-sized damper featuring magneto-rheological (MR) fluid which can be applied to vibration control system. The proposed MR damper consists of cylinder, piston, a couple of bearings, oil-seals and magnetic circuit which has two coils. In this damper, approximately 5cc of MR fluid is used. The damping force of the MR damper is designed to be followed by linear shear-mode Bingham-plastic model. In order to verify the performance of the MR damper, an experimental apparatus is established. In the experimental test, the damping force of the MR damper is measured with respect to time, displacement and velocity. In addition, the time response of MR damper is measured when 1A of step current is applied. Finally, The proposed small MR damper is applied to vibration control. In this process, a simple 1-DOF system is modeled and controlled using PID controller.

유체 유동 모델링에 기초한 MR댐퍼의 동적 감쇠력 예측

이종석(Jongseok Lee),백운경(Woonkyung Baek) 한국자동차공학회 2006 한국자동차공학회 춘 추계 학술대회 논문집 Vol.- No.-

This paper presents a physical model of a MR(magnetorheological) damper to predict its dynamic damping force. To predict dynamic damping force of a MR damper, it is necessary to describe the differential equation of pressure for chambers due to MR fluids compressibility. A empirical data is used to determine the valve characteristics of an annular orifice undergoing MR effect. This model can be effectively applied to the MR damper design.