Frequency Stability Enhancement of Power System using BESS

유성수,곽은섭,문채주 한국전자통신학회 2022 한국전자통신학회 논문지 Vol.17 No.4

Korea has the characteristics of traditional power system such as large-scale power generation and large-scale power transmission systems, including 20 GW large-scale power generation complexes in several regions with unit generator capacity exceeding 1.4 GW, 2−3 ultra-high-voltage transmission lines that transport power from large-scale power generation complexes, and 6 ultra-high-voltage transmission lines that transport power from non-metropolitan areas to the metropolitan area. Due to the characteristics of the power system, the penetration level for renewable energy is low, but due to frequency stability issue, some generators are reducing the output of generators. In the future, the issue of maintaining the stability of the power system is expected to emerge as the most important issue in accordance with the policy of expanding renewable energy. When non-inertial inverter-based renewable energy, such as solar and wind power, surges rapidly, the means to improve the power system stability in an independent system is to install a natural inertial resource synchronous condenser (SC) and a virtual inertial resource BESS in the system. In this study, we analyzed the effect of renewable energy on power system stability and the BESS effect to maintain the minimum frequency through a power system simulation. It was confirmed that the BESS effect according to the power generation constraint capacity reached a maximum of 122.81%. BESS is very slow in response time compared to natural inertia, so it is very important to operate the BESS combined with the synchronous condenser as a controller for improving transient stability.

Simulation and test results of low-order band harmonic filters to decrease resonance phenomenon in the KSTAR power system

Hong, S.L.,Kong, J.D.,Kim, Y.S.,Eom, D.Y.,Park, B.J.,Yoo, H.K.,Lee, H.S. North-Holland ; Elsevier Science Ltd 2014 Fusion engineering and design Vol.89 No.11

The superconducting magnet power supply which supplies superconducting magnet coil (SC) with the power to generate plasma during a KSTAR experiment for nuclear fusion research is a nonlinear load. Characteristic harmonics are generally produced since it converts AC to DC using 6 or 12 pulsed operation. However, non-characteristic harmonics or inter-harmonics are generated according to output control characteristics. Also, 95% out of the power generated from superconducting magnet coil is reactive power. Therefore, harmonic and reactive power occurring during operation have some bad influences such as voltage drop, voltage distortion and decrease in power factor on the KSTAR power system, and reactive power compensator (RPC) & harmonic filter (HF) system which is able to compensate harmonic and reactive power at the same time was established and has been operated [1]. However, out of non-characteristic harmonics and inter-harmonics caused by output control characteristics of superconducting magnet power supply, the more compensation volume of the RPC & HF system increases, the more voltage distortion with harmonic expansion is caused by harmonics in a low-order band due to the parallel resonance in a low-order band between the KSTAR power system and the RPC & HF system. As a result, it has serious effect on the injection capacity restriction of the RPC & HF system, the unstable operation control of superconducting magnet coil, and the operation of main cooling facilities. This paper presents reasons of the resonance phenomenon of the KSTAR power system and suggests a design plan of additional facilities for stable operation of the KSTAR power system, and proves their effects through the simulation and test results.

Enhancement of Power System Dynamic Stability by Designing a New Model of the Power System

Alireza Fereidouni,Behrooz Vahidi 대한전기학회 2014 Journal of Electrical Engineering & Technology Vol.9 No.2

Low frequency oscillations (LFOs) are load angle oscillations that have a frequency between 0.1-2.0 Hz. Power system stabilizers (PSSs) are very effective controllers in improvement of the damping of LFOs. PSSs are designed by linearized models of the power system. This paper presents a new model of the power system that has the advantages of the Single Machine Infinite Bus (SMIB) system and the multi machine power system. This model is named a single machine normalbus (SMNB). The equations that describe the proposed model have been linearized and a lead PSS has been designed. Then, particle swarm optimization technique (PSO) is employed to search for optimum PSS parameters. To analysis performance of PSS that has been designed based on the proposed model, a few tests have been implemented. The results show that designed PSS has an excellent capability in enhancing extremely the dynamic stability of power systems and also maintain coordination between PSSs.

초전도 플라이휠 에너지 저장장치의 강인제어를 이용한 전력계통의 저주파진동 억제

이정필,김한근,Lee, J.P.,Kim, H.G. 한국초전도학회 2012 Progress in superconductivity Vol.14 No.1

In this paper, the robust superconductor flywheel energy storage system(SFESS) controller using $H_{\infty}$ control theory was designed to damp low frequency oscillation of power system. The main advantage of the $H_{\infty}$ controller is that uncertainties of power system can be included at the stage of controller design. Both disturbance attenuation and robust stability for the power system were treated simultaneously by using mixed sensitivity $H_{\infty}$ problem. The robust stability and the performance for uncertainties of power system were represented by frequency weighted transfer function. To verify control performance of proposed SFESS controller using $H_{\infty}$ control, the closed loop eigenvalue and the damping ratio in dominant oscillation mode of power system were analyzed and nonlinear simulation for one-machine infinite bus system was performed under disturbance for various operating conditions. The results showed that the proposed $H_{\infty}$ SFESS controller was more robust than conventional power system stabilizer (PSS).

저전력 휴대용 임베디드 시스템 설계 및 구현

이정환(Jung-Hwan Lee),김명준(Myung-Jung Kim) 한국정보과학회 2007 정보과학회 컴퓨팅의 실제 논문지 Vol.13 No.7

최근 휴대용 임베디드(Embedded) 시스템들은 크기는 작아지나 사용자들의 요구를 만족시키기 위해서 여러 가지 복합적인 기능을 내장하고 있다. 복합적인 기능 수행을 하기 위해서는 처리 능력이 뛰어난 프로세서들을 사용해야만 하고 시스템의 크기를 줄이기 위해서 적은 용량의 배터리를 사용하는 것이 일반적이다. 그러므로 시스템을 한번 충전한 후에 사용할 수 있는 배터리 사용 시간(Battery Life Time)은 중요한 문제로 대두되고 있다. 시스템의 배터리 사용 시간을 늘리기 위해서는 효율적인 전원 설계, 기능 수행에 따른 전력 관리 그리고 프로세서의 전압과 프로세서 클럭(Clock)의 주파수를 최적화하는 것이 가장 중요하다. 이를 위해서 본 논문에서는 전력 효율을 예측하여 시스템의 전체적인 전력 효율을 최적화하는 전원 구성을 하였으며 각 기능에 따른 전력 관리를 위해서 음악 파일 재생과 동영상 파일 재생을 위한 마이크로 프로세서를 사용하고 디지털 멀티미디어 방송(Digital Multimedia Broadcasting) 시청을 위한 별도의 마이크로 프로세서를 사용함으로써 음악 재생과 동영상 재생 시에는 디지털 멀티미디어 방송시청을 위한 마이크로 프로세서에 전원 공급을 차단함으로써 전력 관리를 최적화한다. 마지막으로 시스템에서 사용되는 프로세서들의 전력 관리를 위해 가변 전압 주파수 스케일링(Dynamic Voltage and Frequency Scaling)을 적용하여 프로세서들 또한 최적화하고 실제 구현된 시스템에 실험 결과들을 통하여 감소된 소비 전력의 결과를 보여준다. Portable embedded systems have recently become smaller in size and offer a variety of functions for users. These systems require high performance processors to handle the many functions and also a small battery to fit inside the system. However, due to its size, the battery life has become a major issue. It is important to have both efficient power design and management for each function, while optimizing processor voltage and clock frequency in order to extend the battery life of the system. In this paper, we calculated the efficiency of power in optimizing power rail. This system has two microprocessors. One is used to play music and movie files while the other is for DMB. In order to reduce power consumption, the DMB microprocessor is turned of while music or videos are played. Lastly, DVFS is applied to the processor in the system to reduce power consumption. Experimental results of the implemented system have resulted in reduced power consumption.

Stability Enhancement of a Hybrid Micro-grid System in Grid Fault Condition

Ambia, Mir Nahidul,Al-Durra, Ahmed,Caruana, Cedric,Muyeen, S.M. Journal of International Conference on Electrical 2013 Journal of international Conference on Electrical Vol.2 No.2

Low voltage ride through capability augmentation of a hybrid micro-grid system is presented in this paper which reflects enhanced reliability in the system. The control scheme involves parallel connected multiple ac-dc bidirectional converters. When the micro-grid system is subjected to a severe voltage dip by any transient fault single power converter may not be able to provide necessary reactive power to overcome the severe voltage dip. This paper discusses the control strategy of additional power converter connected in parallel with main converter to support extra reactive power to withstand the severe voltage dip. During transient fault, when the terminal voltage crosses 90% of its pre-fault value, additional converter comes into operation. With the help of additional power converter, the micro-grid system withstands the severe voltage fulfilling the grid code requirements. This multiple converter scheme provides the micro-grid system the capability of low voltage ride through which makes the system more reliable and stable.

Design of PSS and SCRC Controllers to Damp out Low-Frequency Oscillations in Power System

Seung-Mook Baek 보안공학연구지원센터 2014 International Journal of Control and Automation Vol.7 No.10

The paper describes a method to damp out low-frequency oscillations by design and tuning of both power system stabilizer (PSS) and controllable series capacitive reactance compensator (SCRC) controllers in power system. The PSS is generally used to mitigate the low-frequency oscillation by injecting supplementary signal to automatic voltage regulator (AVR) and the SCRC is used to enhance the transfer capacity for the transmission line in power system. Especially, the design of the external controller of the SCRC can provide effective damping for the low-frequency oscillation. In the paper, the effect of the design of both controllers on the system stability is analyzed. Also, the parameter tuning method is introduced and the performances of the proposed method are carried out by time-domain simulation with single-machine connected to infinite bus.

하이브리드시스템 모델링 기반 발전기 전력시스템 안정화장치 정수선정 기법

백승묵(Seung-Mook Baek) 대한전기학회 2014 전기학회논문지 Vol.63 No.7

The paper describes the parameter tuning of power system stabilizer (PSS) for a power plant based on hybrid system modeling. The existing tuning method based on bode plot and root locus is well applied to keep power system stable. However, due to linearization of power system and an assumption that the parameter ratio of the lead-lag compensator in PSS is fixed, the results cannot guarantee the optimal performances to damp out low-frequency oscillation. Therefore, in this paper, hybrid system modeling, which has a DAIS (differential-algebraic-impusive-switched) structure, is applied to conduct nonlinear modeling for power system and find optimal parameter set of the PSS. The performances of the proposed method are carried out by time domain simulation with a single machine connected to infinite bus (SMIB) system.

멀티미디어 SoC용 시스템 버스의 소비 전력 모델링 및 해석

류제천(Che-Cheon Ryu),이제훈(Je-Hoon Lee),조경록(Kyoung-Rok Cho) 한국콘텐츠학회 2007 한국콘텐츠학회논문지 Vol.7 No.11

본 논문은 시스템 버스와 IP로 구성되는 SoC 플랫폼 기반의 설계에서 온칩 버스의 소비 전력을 시스템 레벨에서 빠르고 정확하게 추정하는 방법을 제시한다. 제안된 소비 전력 추정 모델링은 시스템 구조 변화에 따른 버스 시스템의 소비 전력 변화를 직접 예측할 수 있고 이에 따라 시스템 구성을 최적화할 수 있다. 본 논문에서 소비전력 모델링은 크게 두 부분으로 구성된다. 하나는 버스 시스템 구조에 따른 버스 로직들이 사용하는 소비 전력이고, 다른 하나는 데이터 전송시 발생하는 신호 천이에 의한 버스 라인의 소비전력이다. 본 모델링을 타겟 멀티미디어 SoC인 MPEG 인코더에 적용하여 92% 이상의 정확도를 가짐을 보였다. 제안된 모델링은 고성능/저전력 멀티미디어 SoC 설계에 활용 가능할 것으로 기대된다. This paper presents a methodology that accelerates estimating the system-level power consumption for on-chip bus of SoC platforms. The proposed power modeling can estimate the power consumption according to the change of a target SoC system. The proposed model comprises two parts: the one is power estimation of bus logics reflecting the architecture of the bus such as the number of bus layers, the other is to estimate the power consumed by the bus lines during data transmission. We designed the target multimedia SoC system, MPEG encoder as an example and evaluated power consumption using this model. The simulation result shows that the accuracy of the proposed model is over 92%. Thus, the proposed power model can be used to design of a high-performance/low-power multimedia SoC.

Enhancement of Power System Dynamic Stability by Designing a New Model of the Power System

Fereidouni, Alireza,Vahidi, Behrooz The Korean Institute of Electrical Engineers 2014 Journal of Electrical Engineering & Technology Vol.9 No.2

Low frequency oscillations (LFOs) are load angle oscillations that have a frequency between 0.1-2.0 Hz. Power system stabilizers (PSSs) are very effective controllers in improvement of the damping of LFOs. PSSs are designed by linearized models of the power system. This paper presents a new model of the power system that has the advantages of the Single Machine Infinite Bus (SMIB) system and the multi machine power system. This model is named a single machine normal-bus (SMNB). The equations that describe the proposed model have been linearized and a lead PSS has been designed. Then, particle swarm optimization technique (PSO) is employed to search for optimum PSS parameters. To analysis performance of PSS that has been designed based on the proposed model, a few tests have been implemented. The results show that designed PSS has an excellent capability in enhancing extremely the dynamic stability of power systems and also maintain coordination between PSSs.