Survival of surface-modified short versus long implants in complete or partially edentulous patients with a follow-up of 1 year or more: a systematic review and meta-analysis

Raghavendra Shrishail Medikeri,Marisca Austin Pereira,Manjushri Waingade,Shwetambari Navale 대한치주과학회 2022 Journal of Periodontal & Implant Science Vol.52 No.4

Purpose: Short implants are a potential alternative to long implants for use with bone augmentation in atrophic jaws. This meta-analysis investigated the survival rate and marginal bone level (MBL) of surface-modified short vs. long implants. Methods: Electronic and manual searches were performed for articles published between January 2010 and June 2021. Twenty-two randomized controlled trials (RCTs) comparing surface-modified short and long implants that reported the survival rate with at least 1 year of follow-up were selected. Two reviewers independently extracted the data, and the risk of bias and quality of evidence were evaluated. A quantitative meta-analysis was performed regarding survival rate and MBL. Results: The failure rates of surface-modified short and long implants differed significantly (risk ratio, 2.28; 95% confidence interval [CI], 1.46, 3.57; P<0.000). Long implants exhibited a higher survival rate than short implants (mean follow-up, 1–10 years). A significant difference was observed in mean MBL (mean difference=−0.43, 95% CI, −0.63, −0.23; P<0.000), favoring the short implants. Regarding the impact of surface treatment in short and long implants, for hydrophilic sandblasted acid-etched (P=0.020) and titanium oxide fluoride-modified (P=0.050) surfaces, the survival rate differed significantly between short and long implants. The MBL differences for novel nanostructured calcium-incorporated, hydrophilic sandblasted acid-etched, and dual acid-etched with nanometer-scale calcium phosphate crystal surfaces (P=0.050, P=0.020, and P<0.000, respectively) differed significantly for short vs. long implants. Conclusions: Short surface-modified implants are a potential alternative to longer implants in atrophic ridges. Long fluoride-modified and hydrophilic sandblasted acid-etched implants have higher survival rates than short implants. Short implants with novel nanostructured calcium-incorporated titanium surfaces, hydrophilic sandblasted acid-etched surfaces, and dual acid-etched surfaces with nanometer-scale calcium phosphate crystals showed less marginal bone loss than longer implants. Due to high heterogeneity, the MBL results should be interpreted cautiously, and better-designed RCTs should be assessed in the future. Trial Registration: International Prospective Register of Systematic Reviews (PROSPERO) Identifier: CRD42020160185

The long-term evaluation of the prognosis of implants with acid-etched surfaces sandblasted with alumina: a retrospective clinical study

Kim, Min-Joong,Yun, Pil-Young,Chang, Na-Hee,Kim, Young-Kyun Korean Association of Maxillofacial Plastic and Re 2020 Maxillofacial Plastic Reconstructive Surgery Vol.42 No.-

Background: The aim of this study was to evaluate the long-term clinical stability of implants with acid-etched surfaces sandblasted with alumina using retrospective analyses of the survival rate, success rate, primary and secondary stability, complications, and marginal bone loss of the implants. Methods: Patients who had implants placed (TS III SA, SS II SA, SS III SA, and U III SA) with SA surfaces from Osstem (Osstem Implant Co., Busan, Korea) at the Seoul National University Bundang Hospital, from January 2008 to December 2010 were selected for the study. Patients' medical records and radiographs (panorama, periapical view) were retrospectively analyzed to investigate sex, age, location of implantation, diameter, and length of the implants, initial and secondary stability, presence of bone grafting, types of bone grafting and membranes, early and delayed complications, marginal bone loss, and implant survival rate. Results: Ninety-six implants were placed in 45 patients. Five implants were removed during the follow-up period for a total survival rate of 94.8%. There were 14 cases of complications, including 6 cases of early complications and 8 cases of delayed complications. All five implants that failed to survive were included in the early complications. The survival of implants was significantly associated with the occurrence of complications and the absorption of bone greater than 1 mm within 1 year after prosthetic completion. In addition, the absorption of bone greater than 1 mm within 1 year after prosthetic completion was significantly associated with the occurrence of complications, primary stability, and implant placement method. Five cases that failed to survive were all included in the early complications criteria such as infection, failure of initial osseointegration, and early exposure of the fixture. Conclusions: Of the 96 cases, 5 implants failed resulting in a 94.8% survival rate. The failed implants were all cases of early complications such as infection, failure of initial osseointegration, and early exposure of the fixtures. Periimplantitis was mostly addressed through conservative and/or surgical treatment and resulted in very low prosthetic complications. Therefore, if preventive measures are taken to minimize initial complications, the results can be very stable.

A resonance frequency analysis of sandblasted and acid-etched implants with different diameters: a prospective clinical study during the initial healing period

Kim, Hyun-Joo,Kim, Yeun-Kang,Joo, Ji-Young,Lee, Ju-Youn Korean Academy of Periodontology 2017 Journal of Periodontal & Implant Science Vol.47 No.2

Purpose: The possibility of immediate or early loading has become popular in implant dentistry. A prerequisite for the immediate or early loading of an implant prosthesis is the achievement of initial stability in the implant. Moreover, in response to clinicians' interest in verifying clinical stability to determine the optimal time point for functional loading, a non-invasive method to assess implant stability has been developed on the basis of resonance frequency analysis (RFA). The primary objective of this study was to monitor the stability of sandblasted, large-grit, and acid-etched (SLA) implants with different diameters during the early phases of healing by RFA. The secondary objective was to evaluate how the initial stability of implants varied depending on different surface modifications and other contributing factors. Methods: Thirty-five implants (25 SLA implants and 10 resorbable blasting media [RBM] implants) placed in 20 subjects were included. To measure implant stability, RFA was performed at baseline and at 1, 2, 3, 4, 6, and 10 weeks after surgery. Results: The longitudinal changes in the implant stability quotient (ISQ) values were similar for the SLA implants with different diameters and for the RBM implants. During the initial healing period, the ISQ decreased after installation and reached its lowest values at 1 week and 2 weeks, respectively. The mean ISQ values in the SLA implants were significantly higher in ${\varnothing}5.0mm$ implants than in ${\varnothing}4.0mm$ implants. Men showed a higher ISQ than women. Mandibular sites showed a higher ISQ than maxillary sites. Conclusions: All implants used in this study are suitable for immediate or early loading under appropriate indications. A wider diameter and SLA surface treatment of implants could improve the stability, if the implant is fixed with at least 30 Ncm of insertion torque.

Randomized controlled clinical trial of 2 types of hydroxyapatite-coated implants on moderate periodontitis patients

김현석,윤필영,김영균 대한치주과학회 2016 Journal of Periodontal & Implant Science Vol.46 No.5

Purpose: The aim of this study was to compare and analyze the peri-implant tissue conditions and prospective clinical outcomes associated with 2 types of hydroxyapatite (HA)-coated implants: (1) fully HA-coated implants and (2) partially HA-coated implants with resorbable blast medium on the coronal portion of the threads. Methods: Forty-four partially edentulous patients were randomly assigned to undergo the placement of 62 HA-coated implants, and were classified as the control group (partially HA-coated, n=30) and the test group (fully HA-coated, n=32). All patients had chronic periodontitis with moderate crestal bone loss around the edentulous area. The stability and clinical outcomes of the implants were evaluated using the primary and secondary implant stability quotient (ISQ), as well as radiographic, mobility, and peri-implant soft tissue assessments around the implants. The Wilcoxon signed-rank test and the Mann-Whitney test were used to evaluate differences between and within the 2 groups, with P values <0.05 considered to indicate statistical significance. Results: The fully HA-coated implants displayed good retention of crestal bone, and insignificant differences were found in annual marginal bone loss between the 2 types of HA-coated implants (P>0.05). No significant differences were found in the survival rate (group I, 100%; group II, 100%) or the success rate (group I, 93.3%; group II, 93.8%). The fully HA-coated implants also did not significantly increase the risk of peri-implantitis (P>0.05). Conclusions: The fully HA-coated implants did not lead to an increased risk of peri-implantitis and showed good retention of the crestal bone, as well as good survival and success rates. Our study suggests that fully HA-coated implants could become a reliable treatment alternative for edentulous posterior sites and are capable of providing good retention of the crestal bone.

Clinical study on success rate of microscrew implants for orthodontic anchorage

Park, Hyo-Sang 대한치과교정학회 2003 대한치과교정학회지 Vol.33 No.3

치아아동의 고정원으로 사용되고 있는 miniscrew and microscrew implants의 임상 적용의 유용성을 알아보고자 73명의 환자에 식립된 180개를 대상으로 성공율을 연구하였다. 1년 기간의 전반적인 성공율은 93.3%(180개의 miniscrew and microscrew implants중 168개 성공)이었고, UB군(상조골)은 11개중 모두 성공하여 100%를 보였고, LB군(하악 협측치조골)은 96.6%(58개중 56개 성공), UP군(상악 구개측 치조골)은 11개중 모두 성공하여 100%를 보였고, LR군(하악 ㅎ구치 부위)은 19개중 14개가 성공하여 73.7%의 성공율을 보였다. 이 연구를 통하여 볼 때 miniscrew and microscrew implants는 교정치료의 고정원으로 성공적으로 사용될 수 있을 것으로 생각된다. To provide some guideline for microscrew implants, 73 patients that received a total of 180 mini- or microscrew implants were scrutinized. The overall success rate was 93.3% (168 among 180 mini- or microscrew implants) and the mean period of utilization was 15.8 months. Microscrew implants in the UB group (maxillary buccal area) succeeded at a rate of 94.6% (87 among 92), mini- or microscrew implants the LB group (mandibular buccal area) succeeded 96.6% of the time (56 out of 58), while microscrew implants in the UP group (maxillary palatal area) had a 100% success rate (11 out of 11), and mini- or microscrew implants in the LR group (retromolar area) succeeded in 73.7% of cases (14 among 19). This study might indicate that microscrew implants can be used successfully as orthodontic anchorage in daily orthodontic practice.

Complications Including Capsular Contracture in Direct-to-Implant Breast Reconstruction With Textured Anatomical Versus Smooth Round Implants: A Single Center Retrospective Analysis

전홍배,이민영,노태석,정준,안성귀,배숭준,이나라,김영석 한국유방암학회 2023 Journal of breast cancer Vol.26 No.1

Purpose: Implant-based breast reconstruction is the most common reconstruction method used after mastectomy in breast cancer patients. Many studies have compared the smooth round implants and textured anatomical implants. This study aimed to compare the complications, including capsular contracture, between these two implants used in direct-to-implant (DTI) breast reconstruction. Methods: This retrospective chart review was performed using a prospectively maintained database from a single center. We identified patients who underwent mastectomy with DTI single-stage breast reconstruction at our hospital between August 2011 and June 2021. The overall complications, including capsular contracture, postoperative infection, seroma, hematoma, implant rupture, implant exposure, rippling, implant malposition, and nipple necrosis, were analyzed. Results: In total, 340 breasts of 323 patients were reconstructed by the DTI approach using either textured anatomical (n = 203) or smooth round (n = 137) implants. The incidence of overall complications and capsular contracture was significantly lower with smooth round implants than with textured anatomical implants. Multivariate analysis showed that smooth round implants were associated with a reduced risk of overall complications (odds ratio [OR], 0.465; 95% confidence interval [CI], 0.265–0.813) and capsular contracture (OR, 0.475; 95% CI, 0.235–0.962). Particularly, smooth round implants were associated with a decreased risk of overall complications in patients not receiving adjuvant chemotherapy and a decreased risk of capsular contracture in patients with body mass index < 25 kg/m2 and in those not receiving adjuvant radiotherapy. Conclusion: Smooth round implants demonstrated a decreased risk of overall complications and capsular contracture when compared with textured anatomical implants. These results may be utilized in counseling patients regarding the advantages and disadvantages of smooth round implants in DTI breast reconstruction.

Evaluation of failed implants and reimplantation at sites of previous dental implant failure: survival rates and risk factors

박유선,이보아,최성호,김영택 대한치주과학회 2022 Journal of Periodontal & Implant Science Vol.52 No.3

Purpose: The purpose of this study was to evaluate failed implants and reimplantation survival and to identify the relative risk factors for implant re-failure. Methods: Ninety-one dental implants were extracted between 2006 and 2020 at the National Health Insurance Service Ilsan Hospital, including 56 implants in the maxilla and 35 implants in the mandible that were removed from 77 patients. Patient information (e.g., age, sex, and systemic diseases) and surgical information (e.g., the date of surgery and location of the implants and bone grafts) were recorded. If an implant prosthesis was used, prosthesis information was also recorded. Results: In total, 91 first-time failed dental implants in 77 patients were analyzed. Of them, 69 implants in 61 patients received reimplantation after failure. Sixteen patients (22 implants) refused reimplantation or received reimplantation at a different site. Eight of the 69 reimplants failed again. The 1-year survival rate of the 69 reimplants was 89.4%. Age at reimplantation and smoking significantly increased the risk of reimplantation failure. However, a history of taking anti-thrombotic agents showed a statistically significant negative association with reimplantation failure. Of the failed implants, 66% showed early failure and 34% showed late failure of the initial implantation. All 8 re-failed implants showed early failure. Only 3 of these 8 failed reimplants were re-tried and the second reimplants all survived. Conclusions: The total survival rate of implants, which included reimplants and second reimplants was 99.2%, although the survival rate of the initial implantations was 96.3%. Previous failure did not affect the success of the next trial. Reimplantation failure was more strongly affected by patient factors than by implant factors. Therefore, each patient’s specific factors need to be meticulously controlled to achieve successful reimplantation.

Randomized controlled clinical trial of 2 types of hydroxyapatite-coated implants on moderate periodontitis patients

Kim, Hyun-Suk,Yun, Pil-Young,Kim, Young-Kyun Korean Academy of Periodontology 2016 Journal of Periodontal & Implant Science Vol.46 No.5

Purpose: The aim of this study was to compare and analyze the peri-implant tissue conditions and prospective clinical outcomes associated with 2 types of hydroxyapatite (HA)-coated implants: (1) fully HA-coated implants and (2) partially HA-coated implants with resorbable blast medium on the coronal portion of the threads. Methods: Forty-four partially edentulous patients were randomly assigned to undergo the placement of 62 HA-coated implants, and were classified as the control group (partially HA-coated, n=30) and the test group (fully HA-coated, n=32). All patients had chronic periodontitis with moderate crestal bone loss around the edentulous area. The stability and clinical outcomes of the implants were evaluated using the primary and secondary implant stability quotient (ISQ), as well as radiographic, mobility, and peri-implant soft tissue assessments around the implants. The Wilcoxon signed-rank test and the Mann-Whitney test were used to evaluate differences between and within the 2 groups, with P values <0.05 considered to indicate statistical significance. Results: The fully HA-coated implants displayed good retention of crestal bone, and insignificant differences were found in annual marginal bone loss between the 2 types of HA-coated implants (P>0.05). No significant differences were found in the survival rate (group I, 100%; group II, 100%) or the success rate (group I, 93.3%; group II, 93.8%). The fully HA-coated implants also did not significantly increase the risk of peri-implantitis (P>0.05). Conclusions: The fully HA-coated implants did not lead to an increased risk of peri-implantitis and showed good retention of the crestal bone, as well as good survival and success rates. Our study suggests that fully HA-coated implants could become a reliable treatment alternative for edentulous posterior sites and are capable of providing good retention of the crestal bone.

A resonance frequency analysis of sandblasted and acid-etched implants with different diameters: a prospective clinical study during the initial healing period

김현주,김연강,주지영,이주연 대한치주과학회 2017 Journal of Periodontal & Implant Science Vol.47 No.2

Purpose: The possibility of immediate or early loading has become popular in implant dentistry. A prerequisite for the immediate or early loading of an implant prosthesis is the achievement of initial stability in the implant. Moreover, in response to clinicians' interest in verifying clinical stability to determine the optimal time point for functional loading, a non-invasive method to assess implant stability has been developed on the basis of resonance frequency analysis (RFA). The primary objective of this study was to monitor the stability of sandblasted, large-grit, and acid-etched (SLA) implants with different diameters during the early phases of healing by RFA. The secondary objective was to evaluate how the initial stability of implants varied depending on different surface modifications and other contributing factors. Methods: Thirty-five implants (25 SLA implants and 10 resorbable blasting media [RBM] implants) placed in 20 subjects were included. To measure implant stability, RFA was performed at baseline and at 1, 2, 3, 4, 6, and 10 weeks after surgery. Results: The longitudinal changes in the implant stability quotient (ISQ) values were similar for the SLA implants with different diameters and for the RBM implants. During the initial healing period, the ISQ decreased after installation and reached its lowest values at 1 week and 2 weeks, respectively. The mean ISQ values in the SLA implants were significantly higher in Ø 5.0 mm implants than in Ø 4.0 mm implants. Men showed a higher ISQ than women. Mandibular sites showed a higher ISQ than maxillary sites. Conclusions: All implants used in this study are suitable for immediate or early loading under appropriate indications. A wider diameter and SLA surface treatment of implants could improve the stability, if the implant is fixed with at least 30 Ncm of insertion torque.

실리콘고무 비삽입물의 석회화 : 부위별 빈도 Regional Distribution in Relation to Surrounding SQft Tissues

진현석,김현지,한기환 大韓成形外科學會 2004 Archives of Plastic Surgery Vol.31 No.3