http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
광기능성 폴리머의 소산장 결합을 이용한 측면연마 광섬유형 자외선 센서
김상우,서규원,윤종국,장수원,유윤식,이승하,강신원 한국센서학회 2002 센서학회지 Vol.11 No.6
측면연마된 광섬유와 광기능성 색소가 분산된 평면도파로 결합기를 이용한 새로운 형태의 자외선센서를 제작하여 그 특성을 측정하였다. 자외선 조사에 의해 유효굴절률이 변화하는 광변색성 색소가 분산된 폴리머를 평면 도파로 재료로 사용하였다. 박막 광도파로는 광변색성 색소인 스파이록사진을 사용하였다. 자외선 조사시간을 20초, 30초, 40초로 증가시켰을 경우 센서의 파장응답은 1.44nm/mW, 1.64nm/mW, 1.78nm/mW였고 1550nm 파장에서 센서의 90% 복귀시간은 100초로 나타났다. In this paper, we investigated a novel UV sensor using evanescent field coupling between the side polished fiber and photo-functional polymer waveguide. It was found that resonant wavelength shifts occur due to variation in the refractive index of polymer planar waveguide for its photo-functional properties on exposed UV. Spiroxazine (photochromic dye) was used as the planar waveguide. The resonant wavelength response were exhibited at 1.44 nm/mW, 1.64 nm/mW, and 1.78 nm/mW when UV irradiations were exposed for 20 seconds, 30 seconds, and 40 seconds, respectively. The recovery time of sensor was independent of UV exposure power and 90% recovery time was 100 seconds.
브라켓과 탄선 간의 마찰 전후 표면 변화 분석 : 원자현미경을 이용한 예비연구
이태희,박기호,전지윤,김수정,박헌국,박영국 대한치과교정학회 2010 대한치과교정학회지 Vol.40 No.3
브라켓과 호선 간에 발생하는 마찰은 치아 이동의 효율에 상당한 영향을 미친다. 마찰력에 기여하는 요소 중 특히 브라켓과 호선의 표면조도는 중요한 요소이다. 본 연구는 브라켓과 탄선을 실험적으로 마찰시킨 후, 원자현미경 (atomic force microscope, AFM)을 사용하여 브라켓 슬롯과 교정용 탄선의 표면 조도 변화를 정성적, 정량적으로 측정하고 비교 평가하여 브라켓과 호선 간의 마찰이 각각의 표면 변화에 미치는 영향을 규명하고자 시행되었다. 스테인리스 스틸 브라켓과 세라믹 브라켓에 각각 스테인리스 스틸 탄선과 TMA 탄선을 실험적으로 활주마찰시킨 후 각각을 원자현미경을 이용하여 표면을 관찰하였다. 실험결과 브라켓보다는 교정용 탄선에서 활주마찰 후에 더 많은 표면 변화가 나타났다. 또한 활주마찰 후에 스테인리스 스틸 브라켓은 표면 조도의 유의한 변화가 없었으나 세라믹 브라켓은 표면 조도가 감소하였다. 그리고 교정용 탄선은 모두 활주마찰 후에 표면 조도가 증가하였으며 이러한 표면 변화는 스테인리스 스틸 브라켓보다 세라믹 브라켓과의 활주마찰 후에 더 큰 것으로 관찰되었다. 본 실험으로 원자현미경은 브라켓 슬롯과 탄선의 표면 조도를 정량적으로 측정하는 데에 유용한 수단임을 알 수 있었다. Objective: The surface roughness of orthodontic materials is an essential factor that determines the coefficient of friction and the effectiveness of tooth movement. The aim of this study is to evaluate the surface roughness change of the brackets and wires after experimental sliding quantitatively. Methods: Before and after experimental sliding tests, the surface roughness of stainless steel brackets, ceramic brackets, stainless steel wires, and beta-titanium (TMA) wires were investigated and compared using atomic force microscopy (AFM). Results: After sliding tests, changes in the surface of the wire were greater than changes in the bracket slot surface. The surface roughness of the stainless steel bracket was not significantly increased after sliding test, whereas the roughness of ceramic brackets was decreased. Both the surface roughness of stainless steel and TMA wires were increased after sliding test. More changes were observed on the ceramic bracket than the stainless steel bracket. Conclusions: AFM is a valuable research tool when analyzing the surface roughness of the brackets and wires quantitatively.
Radiotherapy diagnostic biomarkers in radioresistant human H460 lung cancer stem-like cells
Yun, Hong Shik,Baek, Jeong-Hwa,Yim, Ji-Hye,Um, Hong-Duck,Park, Jong Kuk,Song, Jie-Young,Park, In-Chul,Kim, Jae-Sung,Lee, Su-Jae,Lee, Chang-Woo,Hwang, Sang-Gu TaylorFrancis 2016 Cancer Biology & Therapy Vol.17 No.2
<P><B>ABSTRACT</B></P><P>Tumor cell radioresistance is a major contributor to radiotherapy failure, highlighting the importance of identifying predictive biomarkers for radioresistance. In this work, we established a radioresistant H460 (RR-H460) cell line from parental radiosensitive H460 lung cancer cells by exposure to fractionated radiation. The radiation-resistant, anti-apoptotic phenotype of RR-H460 cell lines was confirmed by their enhanced clonogenic survival and increased expression of the radioresistance genes Hsp90 and Her-3. RR-H460 cells displayed characteristics of cancer stem-like cells (CSCs), including induction of the surface marker CD44 and stem cell markers Nanog, Oct4, and Sox2. RR-H460 cells also exhibited sphere formation and malignant behavior, further supporting a CSC phenotype. Using proteomic analyses, we identified 8 proteins that were up-regulated in RR-H460 CSC lines and therefore potentially involved in radioresistance and CSC-related biological processes. Notably, 4 of these—PAI-2, NOMO2, KLC4, and PLOD3—have not been previously linked to radioresistance. Depletion of these individual genes sensitized RR-H460 cells to radiotoxicity and additively enhancing radiation-induced apoptosis. Our findings suggest the possibility of integrating molecular targeted therapy with radiotherapy as a strategy for resolving the radioresistance of lung tumors.</P>
이수인 ( Su In Lee ),박운지 ( Woon Ji Park ),최용훈 ( Yong Hun Choi ),윤동균 ( Dong Koun Yun ),한국헌 ( Kuk Heon Han ),최중대 ( Joong Dae Choi ) 한국농공학회 2012 한국농공학회 학술대회초록집 Vol.2012 No.-
System of Rice Intensification (SRI)은 관개용수 사용량을 줄이며, 벼의 생산성을 높일 수 있는 새로운 벼 재배 기술로 본 연구에서는 SRI 벼 재배 방식을 국내에 적용하였을 때의 쌀 증산 효과를 알아보고자 하였다. 이에 SRI 벼 재배방식과 관행 벼 재배 방식의 벼의 생장을 비교하고 SRI의 재식거리에 따른 벼 생산성을 비교 분석하였다. 시험포는 대조구인 관행(재식거리 30×15 cm) 1처리 와 SRI 재배(재식거리 30×30, 40×40, 50×50 cm) 3처리로 2반복하여 가로5 m, 세로 15 m 크기의 시험포를 8개 조성하였다. 관행 및 SRI 시험포에 이앙할 모의 재배 품종으로 오대벼를 공시하였다. 관행은 1주당 3-4본씩 이앙하였으며, SRI는 포트 트레이를 이용해 뿌리의 손상을 최소화하며 1주당 1본씩 이앙하였다. 물관리를 제외한 시비와 제초 등의 영농관리는 동일하게 수행하였으며, 벼의 생육 모니터링은 이앙 후부터 주기적으로 시험포별 분얼수(경수) 및 벼 크기(초장)의 변화를 측정하였다. 실험결과 SRI 모두 관행 대비 경수는 최대 1.5배 높은 값을 보였으며, 초장 또한 관행대비 최소 10 cm 이상 높게 측정되었다. 또한 SRI의 재식거리 별 벼의 생장성을 비교 결과 재식거리가 넓을수록 벼의 생장이 좋게 나타났다. 그러나 재식거리가 넓을수록 재식밀도가 적으며, 본 연구에 사용된 벼 품종은 자포니카계열로 국외 선행연구들에 이용된 인디카계열의 품종과 다르게 최대 분얼수가 적게 나타나 본 연구에서의 SRI 수확량은 관행 대비 76∼92%로 나타났다. 이에 국내 SRI 적용을 위해서는 벼 품종을 고려한 재식거리의 단축과 이앙 방법의 조건 변화 등의 추가적인 연구가 필요할 것으로 판단된다.
SRI 적용 논에서 이앙시 모 크기에 따른 생육 변화 비교
이수인 ( Su In Lee ),박운지 ( Woon Ji Park ),신재영 ( Jae Young Shin ),윤동균 ( Dong Koun Yun ),한국헌 ( Kuk Heon Han ),최중대 ( Joong Dae Choi ) 한국농공학회 2012 한국농공학회 학술대회초록집 Vol.2012 No.-
System of Rice Intensification (SRI)은 농업용수 사용량의 절감과 생산량 증대 효과를 기대할 수 있는 농법이다. 이러한 SRI는 비담수 재배를 원칙으로 하며, 어린모의 이앙과 넓은 재식거리를 조건으로 한다. 본 연구는 SRI 적용 논의이앙시 모크기에 따른 벼의 생육 변화를 비교하여 어린모를 이앙하는 SRI 원칙이 국내에 SRI 적용에 효과적인지 평가하는데 목적이 있다. 시험포는 대조구인 상시담수(관행, 재식거리 30×15 cm) 1처리와 SRI 재배 (장모 크기 18.5±1.0cm, 재식거리 25×25 cm) 1처리, SRI 재배 (어린모 크기 7.52±0.3 cm, 재식거리 25×25 cm) 1처리하여 3처리 2반복하여 가로 5 m, 세로 7.5 m크기의 시험포를 6개 조성하였다. 관행과 SRI 시험포 모두 오대벼를 공시하고 관행은 주당3-4본씩 이앙을 실시하였으며, SRI는 주당 1본씩 이앙하였다. 시비와 제초 등의 영농 관리는 관행과 SRI 모두 동일하게 수행하였다. 실험결과 SRI 장모와 어린모 시험포에서의 벼 분얼수는 관행대비 약 1.2배 높게 나타났다. 하지만 SRI 원칙중 어린모의 이앙이 가뭄이나 이상고온 등으로 인한 환경영향을 최소화하며, 증수 효과가 있다는 국외 선행연구 결과와는 달리 본연구의 국내 어린모의 SRI 벼 재배 방식 적용은 벼의 생육 비교 결과에서 장모 시험포에서의 분얼수와 크게 차이가 나타나지 않았다. 따라서 국내 SRI 적용에 있어 어린모의 이앙이 쌀의 증산에 크게 기여한다 평가하기 어려울 것으로 보이며, SRI 벼 재배 방식의 국내 적용을 위해서는 추가적인 SRI 원칙에 대한 연구가 필요할 것으로 판단된다.
단양주 방법으로 제조된 막걸리의 발효과정 중 초고압 처리에 의한 미생물적 및 이화학적 특성 변화
하수정(Su-Jeong Ha),양승국(Seung-Kuk Yang),인예원(Ye-Won In),김윤지(Yun-Ji Kim),오세욱(Se-Wook Oh) 한국식품영양과학회 2012 한국식품영양과학회지 Vol.41 No.8
This study was conducted to examine changes in the microbial and physicochemical properties of single-brewed Makgeolli in response to high hydrostatic pressure (HHP) treatment during various fermentation stages. HHP was applied in 2-day intervals at 400 MPa for 5 min during fermentation at 25oC. As a result, lactic acid bacteria showed 5~6 log reduction and reappeared at approximately 3~6 log cfu/mL as fermentation proceeded. Yeast also showed 5~6 log reduction but did not reappear during later fermentation period. HPP treatment did not result in any alcohol production on day 0 and 2. However, HPP treatment altered the pH and titratable acidity by reducing the number of microorganism. Reducing sugar contents of the samples increased continuously to 8.99% in 0 day treated sample and 5.01% in 2 day treated sample, whereas untreated Makgeolli contained 1.53% reducing sugars on 6 day due to alcohol conversion by yeast. Based on these results, HPP treatment during various fermentation stages altered the physicochemical properties of Makgeolli by changing the microbial community.