In-pile tritium release behavior and the post-irradiation experiments of Li4SiO4 fabricated by melting process

Zhao Linjie,Yang Mao,Xiao Chengjian,Gong Yu,Ran Guangming,Chen Xiaojun,Li Jiamao,Yue Lei,Chen Chao,Hou Jingwei,Wang Heyi,Long Xinggui,Peng Shuming 한국원자력학회 2024 Nuclear Engineering and Technology Vol.56 No.1

Understanding the tritium release and retention behavior of candidate tritium breeder materials is crucial for breeder blanket design. Recently, a melt spraying process was developed to prepare Li4SiO4 pebbles, which were subsequently subjected to the in-pile tritium production and extraction platform in China Mianyang Research Reactor (CMRR) to investigate their in-situ tritium release behavior and irradiation performance. The results demonstrate that HT is the main tritium release form, and adding hydrogen to the purge gas reduces tritium retention while increasing the HT percent in the purge gas. Post-irradiation experiments reveal that the irradiated pebbles darken in color and their grains swell, but the mechanical properties remain largely unchanged. It is concluded that the tritium residence time of Li4SiO4 made by melt spraying method at 467 ◦C is approximately 23.34 h. High-density Li4SiO4 pebbles exhibit tritium release at relatively low temperatures (<600 ◦C) that is mainly controlled by bulk diffusion. The diffusion coefficient at 525 ◦C and 550 ◦C is 1.19 × 10 11 cm2/s and 5.34 × 10 11 cm2/s, respectively, with corresponding tritium residence times of 21.3 hours and 4.7 hours.

Transcriptome profiling of rubber tree (Hevea brasiliensis) discovers candidate regulators of the cold stress respo

Xiao‑Xiao Gong,Bing‑Yu Yan,Jin Hu,Cui‑Ping Yang,Yi‑Jian Li,Jin‑Ping Liu,Wen‑Bin Liao 한국유전학회 2018 Genes & Genomics Vol.40 No.11

Tropical plant rubber tree (Hevea brasiliensis) is the sole source of commercial natural rubber and low-temperature stress is the most important limiting factor for its cultivation. To characterize the gene expression profiles of H. brasiliensis under the cold stress and discover the key cold stress-induced genes. Three cDNA libraries, CT (control), LT2 (cold treatment at 4 °C for 2 h) and LT24 (cold treatment at 4 °C for 24 h) were constructed for RNA sequencing (RNA-Seq) and gene expression profiling. Quantitative real time PCR (qRT-PCR) was conducted to validate the RNA-Seq and gene differentially expression results. A total of 1457 and 2328 differentially expressed genes (DEGs) in LT2 and LT24 compared with CT were respectively detected. Most significantly enriched KEGG pathways included flavonoid biosynthesis, phenylpropanoid biosynthesis, plant hormone signal transduction, cutin, suberine and wax biosynthesis, Pentose and glucuronate interconversions, phenylalanine metabolism and starch and sucrose metabolism. A total of 239 transcription factors (TFs) were differentially expressed following 2 h or/and 24 h of cold treatment. Cold-response transcription factor families included ARR-B, B3, BES1, bHLH, C2H, CO-like, Dof, ERF, FAR1, G2-like, GRAS, GRF, HD-ZIP, HSF, LBD, MIKC-MADS, M-type MADS, MYB, MYB-related, NAC, RAV, SRS, TALE, TCP, Trihelix, WOX, WRKY, YABBY and ZF-HD. The genome-wide transcriptional response of rubber tree to the cold treatments were determined and a large number of DEGs were characterized including 239 transcription factors, providing important clues for further elucidation of the mechanisms of cold stress responses in rubber tree.

Meteorological driven factors of population growth in brown planthopper, Nilaparvata lugens Stål (Hemiptera: Delphacidae), in rice paddies

Xiao‐Zhen Li,Yi ZOU,Hai-Yan YANG,Hai-Jun XIAO,Jian-Guo WANG 한국곤충학회 2017 Entomological Research Vol.47 No.5

Growth of brown planthopper (BPH) (Nilaparvata lugens Stål) in rice paddies is mainly driven by meteorological factors under similar management practices. By analyzing field investigation and meteorological data collected from 2008 to 2013 in Nanchang, China, we show that BPH population densities and monthly growth rates (BGR) changed greatly from May to October, and these changes were closely associated with meteorological factors. Stepwise regression and path analysis indicated average speed of winds (AW) in June and lowest temperature (LT) in July were the first factors entering analysis, which interpreted 46.20% and 31.90% of their influences on BGR. While highest temperature (HT) in August and average temperature (AT) in September were the most important factors affecting BGR, but their direct path coefficients were all smaller than their corresponding indirect path coefficients. In October, relative humidity (RH), AW and number of raining days (RD) had significant effects on BGR. According to the sum of each meteorological factor entering stepwise regression analysis sequences, we found AW had the utmost effect on BPH growth, followed by AT and RH, but LT and RD least. The work demonstrate dynamic meteorological factors driving BPH growth and outbreak in rice paddies, which would facilitate the development of durable approaches for forecasting and controlling this destructive rice pest.

Construction of High Strain Rate Loading Constitutive Model and Failure Model and Prediction of Forming Limit for LA103Z Magnesium Alloy

Hailiang Yang,Xiao Wang,Peng Ni,Zhewen Li,Huixia Liu 대한금속·재료학회 2022 METALS AND MATERIALS International Vol.28 No.8

In order to use numerical simulation to reveal the formability of magnesium–lithium alloys and other light alloys under highstrain rate, it is crucial to construct a constitutive model and a forming limit diagram (FLD) of LA103Z alloy that was formedby laser shock at high strain rate. In this study, three different uniaxial tensile experiments on the ultralight alloy materialLA103Z magnesium alloy were conducted, the mechanical behavior of the material with sensitivity to high strain rate wasstudied, and a Johnson–Cook (JC) constitutive model sensitive to high strain rates and suitable for laser shock forming wasproposed. At the same time, the constitutive parameters and failure parameters of the modified JC model of LA103Z magnesiumalloy were obtained through three different uniaxial tensile experiments. On the basis of the relationship betweentensile loading and stress–strain of LA103Z magnesium alloy, the experiments demonstrated the precision of the modified JCconstitutive model. A modified constitutive model was then developed by using the user material subroutine VUMAT, andthen it was applied to ABAQUS. Finally, the formability of the material was simulated, and the FLD of LA103Z magnesiumalloy material in laser shock forming was predicted. This study provides guidance on the actual production and applicationof LA103Z magnesium alloys.

Colorectal Cancer Concealment Predicts a Poor Survival: A Retrospective Study

Li, Xiao-Pan,Xie, Zhen-Yu,Fu, Yi-Fei,Yang, Chen,Hao, Li-Peng,Yang, Li-Ming,Zhang, Mei-Yu,Li, Xiao-Li,Feng, Li-Li,Yan, Bei,Sun, Qiao Asian Pacific Journal of Cancer Prevention 2013 Asian Pacific journal of cancer prevention Vol.14 No.7

Objectives: Understanding the situation of cancer awareness which doctors give to patients might lead to prognostic prediction in cases of of colorectal cancer (CRC). Methods: Subsets of 10,779 CRC patients were used to screen the risk factors from the Cancer Registry in Pudong New Area in cancer awareness, age, TNM stage, and gender. Survival of the patients was calculated by the Kaplan-Meier method and assessed by Cox regression analysis. The views of cancer awareness in doctors and patients were surveyed by telephone or household. Results: After a median observation time of 1,616 days (ranging from 0 to 4,083 days) of 10,779 available patients, 2,596 of the 4,561 patients with cancer awareness survived, whereas 2,258 of the 5,469 patients without cancer awareness and 406 of the 749 patients without information on cancer awareness died of the disease. All-cause and cancer-specific survival were poorer for the patients without cancer awareness than those with (P < 0.001 for each, log-rank test). Cox multivariate regression analysis showed that cancer concealment cases had significantly lower cancer-specific survival (hazard ratio (HR) = 1.299; 95 % confidence interval (CI): 1.200-1.407)and all-cause survival (HR = 1.324; 95 % CI: 1.227-1.428). Furthermore, attitudes of cancer awareness between doctors and patients were significantly different (P < 0.001). Conclusion: Cancer concealment, not only late-stage tumor and age, is associated with a poor survival of CRC patients.

Relationship Between the SER Treatment Period and Prognosis of Patients with Small Cell Lung Cancer

Xiao, Xiao-Guang,Wang, Shu-Jing,Hu, Li-Ya,Chu, Qian,Wei, Yao,Li, Yang,Mei, Qi,Chen, Yuan Asian Pacific Journal of Cancer Prevention 2014 Asian Pacific journal of cancer prevention Vol.15 No.15

Purpose: To explore the relationship between SER (time between the start of any treatment and the end of radiation therapy) and the survival of patients with limited-stage small cell lung cancer. Materials and Methods: Between 2008 and 2013, 135 cases of limited-stage small cell lung cancer (LS-SCLC) treated with consecutively curative chemoradiotherapy were included in this retrospective analysis. In terms of SER, patients were divided into early radiotherapy group (SER<30 days, n=76) and late radiotherapy group ($SER{\geq}30$ days, n=59) with a cut-off of SER 30 days. Outcomes of the two groups were compared for overall survival. Results: For all analyzable patients, median follow-up time was 23.8 months and median overall survival time was 16.8 months. Although there was no significant differences in distant metastasis free survival between the two groups, patients in early radiotherapy group had a significantly better PFS (p=0.003) and OS (p=0.000). Conclusions: A short SER may be a good prognostic factor for LD-SCLC patients treated with concurrent chemoradiotherapy.

Cinnamaldehyde Derivatives Inhibit Coxsackievirus B3-Induced Viral Myocarditis

( Xiao-qiang Li ),( Xiao-xiao Liu ),( Xue-ying Wang ),( Yan-hua Xie ),( Qian Yang ),( Xin-xin Liu ),( Yuan-yuan Ding ),( Wei Cao ),( Si-wang Wang ) 한국응용약물학회 2017 Biomolecules & Therapeutics(구 응용약물학회지) Vol.25 No.3

The chemical property of cinnamaldehyde is unstable in vivo, although early experiments have shown its obvious therapeutic effects on viral myocarditis (VMC). To overcome this problem, we used cinnamaldehyde as a leading compound to synthesize derivatives. Five derivatives of cinnamaldehyde were synthesized: 4-methylcinnamaldehyde (1), 4-chlorocinnamaldehyde (2), 4-methoxycinnamaldehyde (3), α-bromo-4-methylcinnamaldehyde (4), and α-bromo-4-chlorocinnamaldehyde (5). Neonatal rat cardiomyocytes and HeLa cells infected by coxsackievirus B3 (CVB3) were used to evaluate their antiviral and cytotoxic effects. In vivo BALB/c mice were infected with CVB3 for establishing VMC models. Among the derivatives, compound 4 and 5 inhibited the CVB3 in HeLa cells with the half-maximal inhibitory concentrations values of 11.38 ± 2.22 μM and 2.12 ± 0.37 μM, respectively. The 50% toxic concentrations of compound 4 and 5-treated cells were 39-fold and 87-fold higher than in the cinnamaldehyde group. Compound 4 and 5 effectively reduced the viral titers and cardiac pathological changes in a dose-dependent manner. In addition, compound 4 and 5 significantly inhibited the secretion, mRNA and protein expressions of inflammatory cytokines TNF-α, IL-1β and IL-6 in CVB3-infected cardiomyocytes, indicating that brominated cinnamaldehyde not only improved the anti-vital activities for VMC, but also had potent anti-inflammatory effects in cardiomyocytes induced by CVB3.

Behavior of three-tube buckling-restrained brace with circumference pre-stress in core tube

Yang Li,Haiyan Qu,Shaowen Xiao,Peijun Wang,Yang You,Shuqing Hu 국제구조공학회 2019 Steel and Composite Structures, An International J Vol.30 No.2

The behavior of a new Three-Tube Buckling-Restrained Brace (TTBRB) with circumference pre-stress (σθ,pre) in core tube are investigated through a verified finite element model. The TTBRB is composed of one core tube and two restraining tubes. The core tube is in the middle to provide the axial stiffness, to carry the axial load and to dissipate the earthquake energy. The two restraining tubes are at inside and outside of the core tube, respectively, to restrain the global and local buckling of the core tube. Based on the yield criteria of fringe fiber, a design method for restraining tubes is proposed. The applicability of the proposed design equations are verified by TTBRBs with different radius-thickness ratios, with different gap widths between core tube and restraining tubs, and with different levels of σθ,pre. The outer and inner tubes will restrain the deformation of the core tube in radius direction, which causes circumference stress (σθ) in the core tube. Together with the σθ,pre in the core tube that is applied through interference fit of the three tubes, the yield strength of the core tube in the axial direction is improved from 160 MPa to 235 MPa. Effects of gap width between the core tube and restraining tubes, and σθ,pre on hysteretic behavior of TTBRBs are presented. Analysis results showed that the gap width and the σθ,pre can significantly affect the hysteretic behavior of a TTBRB.

Limit analysis of stability of twin shallow tunnels considering surface settlement

Xiao-li Yang,Rui Zhang 대한토목학회 2018 KSCE JOURNAL OF CIVIL ENGINEERING Vol.22 No.5

This work conducts the plane-stain stability analysis of unlined dual shallow-buried tunnel roof with considering settlement. Bytaking account of the nonlinearity of soils, nonlinear analysis with Power-Law failure criterion is conducted to describe the grounddeformation around twin tunnels on the basis of the superposition technique. Due to the geomechanical difference between differentparts of twin tunnels, analytical expressions of the two different shape curves which describe two different parts of neighborhoodtunnels are obtained with the variation calculus, which are verified by numerical modelling. The dimensionless solutions for thestability number of twin tunnels are obtained by virtual work equations and also compared with those calculated by other collapsemechanisms. The stability number is derived to examine the effects of spacing between tunnels on the stability of tunnels. Theparameter sensitivity analysis is carried out to explore the scope of failure soil block and the upper bound limit supporting load intwin tunnels.

Selection of Reference Genes for Real-time Quantitative PCR Normalization in the Process of Gaeumannomyces graminis var. tritici Infecting Wheat

Li-hua Xie,Xin Quan,Jie Zhang,Yan-yan Yang,Run-hong Sun,Ming-cong Xia,Bao-guo Xue,Chao Wu,Xiao-yun Han,Ya-nan Xue,Li-rong Yang 한국식물병리학회 2019 Plant Pathology Journal Vol.35 No.1

Gaeumannomyces graminis var. tritici is a soil borne pathogenic fungus associated with wheat roots. The accurate quantification of gene expression during the process of infection might be helpful to understand the pathogenic molecular mechanism. However, this method requires suitable reference genes for transcript normalization. In this study, nine candidate reference genes were chosen, and the specificity of the primers were investigated by melting curves of PCR products. The expression stability of these nine candidates was determined with three programs-geNorm, Norm Finder, and Best Keeper. TUBβ was identified as the most stable reference gene. Furthermore, the exopolygalacturonase gene (ExoPG) was selected to verify the reliability of TUBβ expression. The expression profile of ExoPG assessed using TUBβ agreed with the results of digital gene expression analysis by RNA-Seq. This study is the first systematic exploration of the optimal reference genes in the infection process of Gaeumannomyces graminis var. tritici.