http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Cheng Long Wu,Jian Cheng Kan,Qi Hui Wang,Ji Ming Liu,Zun Qiang Li 국제구조공학회 2021 Steel and Composite Structures, An International J Vol.41 No.1
Prefabricated steel-concrete composite structure has the advantages of large bearing capacity, reliable connection, and good durability, which is of great significance to the development of building industrialization. In this paper, a finite element model (FEM) of the modular prefabricated SRC column-steel beam composite joint is established and verified its accuracy through ABAQUS. The effects of various parameter variables on the hysteresis curve, skeleton curve, ductility, energy consumption, and performance deterioration are investigated. The results show that as the axial compression ratio increases, the joint bearing capacity first increases and then decreases, the strength and stiffness have relatively stable degradation characteristics. However, the hysteresis curve has a certain “pinch” phenomenon, which reduces the energy consumption performance. Different column end bolts margin and apertures have little effect on the bearing capacity, strength and stiffness degradation performance, but affect energy consumption and ductility. The width-to-thickness ratio of the square steel tube has a greater impact on the bearing capacity, energy consumption and ductility, and has less impact on the strength and stiffness degradation performance. As the thickness of the joint cover plate increases, the bearing capacity, energy consumption and initial stiffness of the joint gradually increase, the ductility first increases and then decreases.
Liu, Wen-Long,Wu, Meng-Qiang,Zhou, Ru-Chao,Yan, Li-Dan,Zhang, Shu-Ren,Zhang, Qi-Yi Korean Chemical Society 2011 Bulletin of the Korean Chemical Society Vol.32 No.12
The chalcopyrite-type $CuInSe_2$ is a remarkable material for thin film solar cells owing to its electronic structure and optical response. Single-phase sphere-like $CuInSe_2$ nanocrystallite particles were prepared by a facile noninjection method with triethanolamine as the complexing agent and the solvent simultaneously. The period of the reaction was the key to form single-phase $CuInSe_2$ nanocrystals at $240^{\circ}C$. TEM, XRD, XPS, EDX investigations were performed to characterize the morphology and the detailed structure of as-synthesized $CuInSe_2$ nanocrystals. All of the analysis results proved that the synthesized nanocrystals were pure phase and close to the stoichiometric ratio rather than a simple mixture. The band gap of the obtained $CuInSe_2$ nanocrystals was $1.03{\pm}0.03$ eV.
Xiang-li Long,Zhi-hao Wang,San-qiang Wu,Shi-ming Wu,Hai-feng Lv,Wei-kang Yuan 한국공업화학회 2014 Journal of Industrial and Engineering Chemistry Vol.20 No.1
Isophthalic acid (IPA) is commercially produced from m-xylene oxidation with the catalysis of thehomogeneous Co–Mn–Br catalyst system. In this study, a catalytic system consisting of HPW/C and Co(II)has been put forward to oxidize m-xylene (MX) to IPA. The experimental results prove that the HPW/Cand Co catalytic system is capable of catalyzing the oxidation of MX to IPA, which can obtain a higher MXconversion and IPA concentration than the homogeneous H3PW12O40/Co(OAc)2/Mn(OAc)2 catalyticsystem. The heterogeneous catalytic system is also advantageous over the homogeneous catalyticsystem in the inhibition of the oxidation of acetic acid and IPA. The optimal amount of phosphotungsticacid supported on carbon is 7.5% (wt). The best dosage of HPW/C is 15 g l-1. The optimum Co(II)concentration in the catalytic system for IPA production is 0.064% (wt). The best HPW/C activationtemperature is 220℃ .
A Noninjection Reaction Route to CuInSe2 Nanocrystals with Triethanolamine as the Complexing Agent
Qi-Yi Zhang,Wen-Long Liu,Meng-Qiang Wu,Ru-Chao Zhou,Li-Dan Yan,Shu-Ren Zhang 대한화학회 2011 Bulletin of the Korean Chemical Society Vol.32 No.12
The chalcopyrite-type CuInSe_2 is a remarkable material for thin film solar cells owing to its electronic structure and optical response. Single-phase sphere-like CuInSe_2 nanocrystallite particles were prepared by a facile noninjection method with triethanolamine as the complexing agent and the solvent simultaneously. The period of the reaction was the key to form single-phase CuInSe_2 nanocrystals at 240 ^oC. TEM, XRD, XPS, EDX investigations were performed to characterize the morphology and the detailed structure of as-synthesized CuInSe_2 nanocrystals. All of the analysis results proved that the synthesized nanocrystals were pure phase and close to the stoichiometric ratio rather than a simple mixture. The band gap of the obtained CuInSe_2nanocrystals was 1.03 ± 0.03 eV.
Numerical Simulation on New Conical Spray for Diesel Premixed Charge Compression Ignition
( Li Yan Feng ),( Wu Qiang Long ),( Bao Guo Du ),( Xian Yin Leng ) 한국액체미립화학회 2005 한국액체미립화학회 학술강연회 논문집 Vol.2005 No.-
Concerning the difficulty of pre-mixture preparation for diesel HCCI combustion, a new conical spray is proposed. The new conical spray is formed by the combination of multi-hole nozzle and close impingement structure. The new spray has characteristics of high dispersion and acts with flexible penetration in design. Three-dimensional CFD package AVL FIRE 8.2 was used to simulate pre-mixture preparation process with the new conical spray. The effects of combustion chamber shape and impingement structure on pre-mixture quality were analyzed. The calculation results indicate the following conclusions: (1) with the application of new conical spray, fuel impingement and adhesion on piston or liner surface are avoided; (2) combustion chamber shape has crucial effect on pre-mixture homogeneity, which is apparent when start of injection is or later than 60°CA BTDC; (3) compared with other kinds of combustion chamber, deep reentrant combustion chamber performs better on pre-mixture preparation if the start of injection is 60° or 80°CA BTDC; (4) the geometry of impingement orientation structure also affects pre-mixture quality.
A study on the spray characteristics of a piezo pintle-type injector for DI asoline engines
Quan Dong,Tsuneaki Ishima,Hisanobu Kawashima,Wu-qiang Long 대한기계학회 2013 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.27 No.7
We studied the spray flow initiated from a piezo pintle-type injector for DI gasoline engines in an environment supplied by a constant volume vessel by means of laser diagnostics. To fully grasp the effects of the characteristic parameters, including designed spray angle,needle lift, injection pressure (Pinj) and ambient pressure (Pb), on the spray atomization and mixture preparation, particle image velocimetry (PIV) and phase Doppler anemometry (PDA) are used in the experiment, respectively. The gas perpendicularly enters into the outer periphery of the conical spray injected through the pintle-type injector activated by piezo, which creates two large-scale vortices:the vortex A and vortex B. The velocity standard deviation of the spray field is introduced to analyze the gas flow motion in the vicinity of nozzle. The droplet information of spray field is also recorded by PDA in variable boundary conditions. The time dividing method is used to study the droplet characteristics in four parts of spray. The injector with 98° designed spray angle has smaller droplet mean diameter (D10 and D32), due to a larger spray distribution. When the droplet velocity of the spray field is close to 0 m/s, the D10 and D32hold at around 10 μm and 20 μm, respectively, in atmospheric pressure condition, which are about 20 μm and 40 μm, respectively, at ambient pressure of 1.1 MPa.
( Mei Rong Bai ),( Jun Ni ),( Su Qin Shen ),( Qiang Huang ),( Jia Xue Wu ),( Yi Chen Le ),( Long Yu ) 생화학분자생물학회(구 한국생화학분자생물학회) 2014 BMB Reports Vol.47 No.11
Aurora-A is a centrosome-localized serine/threonine kinase that is overexpressed in multiple human cancers. We previously reported an intramolecular inhibitory regulation of Aurora-A between its N-terminal regulatory domain (Nt, amino acids [aa] 1-128) and the C-terminal catalytic domain (Cd, aa 129-403). Here, we demonstrate that although both Aurora-A mutants (AurA-K250G and AurA-D294G/Y295G) lacked interactions between the Nt and Cd, they also failed to interact with Ajuba, an essential activator of Aurora-A, leading to loss of kinase activity. Additionally, overexpression of either of the mutants resulted in centrosome amplification and mitotic spindle formation defects. Both mutants were also able to cause G2/M arrest and apoptosis. These results indicate that both K250 and D294/Y295 are critical for direct interaction between Aurora-A and Ajuba and the function of the Aurora-A complex in cell cycle progression. [BMB Reports 2014; 47(11): 631-636]
Xu, Chun-Sheng,Zheng, Jian-Yong,Zhang, Hai-Long,Zhao, Hua-Dong,Zhang, Jing,Wu, Guo-Qiang,Wu, Lin,Wang, Qing,Wang, Wei-Zhong,Zhang, Jian Asian Pacific Journal of Cancer Prevention 2012 Asian Pacific journal of cancer prevention Vol.13 No.7
Esophageal carcinoma (EC) is one of the most aggressive cancers with a poor prognosis. Understanding the molecular mechanisms underlying esophageal cancer progression is a high priority for improved EC diagnosis and prognosis. Recently, MSP58 was shown to behave as an oncogene in colorectal carcinomas and gliomas. However, little is known about its function in esophageal carcinomas. We therefore examined the effects of MSP58 knockdown on the growth of esophageal squamous cell carcinoma (ESCC) cells in vitro and in vivo in order to gain a better understanding of its potential as a tumor therapeutic target. We employed lentiviral-mediated small hairpin RNA (shRNA) to knock down the expression of MSP58 in the ESCC cell lines Eca-109 and EC9706 and demonstrated inhibition of ESCC cell proliferation and colony formation in vitro. Furthermore, flow cytometry and western blot analyses revealed that MSP58 depletion induced cell cycle arrest by regulating the expression of P21, CDK4 and cyclin D1. Notably, the downregulation of MSP58 significantly inhibited the growth of ESCC xenografts in nude mice. Our results suggest that MSP58 may play an important role in ESCC progression.
Genome-wide analysis of codon usage bias patterns in an enterotoxigenic Escherichia coli F18 strain
Ri Wei Xia,Wen Bin Bao,Xue Mei Yin,Wei Yun Qin,Guo Qiang Zhu,Sheng Long Wu 한국유전학회 2017 Genes & Genomics Vol.39 No.11
Enterogenic Escherichia coli (ETEC) F18 strains are the main pathogenic bacteria causing severe diarrhea in humans and domestic animals. However, the information about synonymous codon usage pattern of ETEC F18 genome remains unclear. We conducted a genome-wide analysis of synonymous codon usage patterns in the ETEC F18 strain SRA: SAMN02471895. After filtering of the complete genome sequence, 4327 coding sequences were analyzed using multivariate statistical methods to calculate synonymous codon usage patterns and to evaluate the influence of various factors in shaping the codon usage. The mean GC content was 51.38%, with a slight preference for G/C-ending codons. Twenty-two codons were determined as ‘‘optimal codons”. ENC plots showed some of the genes were on or close to the expected curve, while only points with low-ENC values were below the curve. PR2 analysis showed that GC and AT were not used proportionally, suggesting major roles for mutational pressure and natural selection in shaping usage. Neutrality plots showed a significant correlation between GC12 and GC3, suggesting that mutational pressure is responsible for nucleotide composition in shaping the strength of codon usage. Translational selection was the main factor shaping the codon usage pattern of ETEC F18 genome, while other factors such as protein length, GRAVY and ARO values also influenced codon usage to some extent. We analyzed the codon usage pattern systematically and identified the factors shaping codon usage bias in the ETEC F18 genome. Such information further elucidates the mechanisms of synonymous codon usage bias and provides the basis of molecular genetic engineering and evolutionary studies.