Differential Impacts on Bacterial Composition and Abundance in Rhizosphere Compartments between Al-Tolerant and Al-Sensitive Soybean Genotypes in Acidic Soil

Wen Zhong-Ling,Yang Min-Kai,Fazal Aliya,Liao Yong-Hui,Cheng Lin-Run,Hua Xiao-Mei,Hu Dong-Qing,Shi Ji-Sen,Yang Rong-Wu,Lu Gui-Hua,Qi Jin-Liang,Zhi Hong,Qian Qiu-Ping,Yang Yong-Hua 한국미생물·생명공학회 2020 Journal of microbiology and biotechnology Vol.30 No.8

In this study, two soybean genotypes, i.e., aluminum-tolerant Baxi 10 (BX10) and aluminumsensitive Bendi 2 (BD2), were used as plant materials and acidic red soil was used as growth medium. The soil layers from the inside to the outside of the root are: rhizospheric soil after washing (WRH), rhizospheric soil after brushing (BRH) and rhizospheric soil at two sides (SRH), respectively. The rhizosphere bacterial communities were analyzed by high-throughput sequencing of V4 hypervariable regions of 16S rRNA gene amplicons via Illumina MiSeq. The results of alpha diversity analysis showed that the BRH and SRH of BX10 were significantly lower in community richness than that of BD2, while the WRH exhibited no significant difference between BX10 and BD2. Among the three sampling compartments of the same soybean genotype, WRH had the lowest community richness and diversity while showing the highest coverage. Beta diversity analysis results displayed no significant difference for any compartment between the two genotypes, or among the three different sampling compartments for any same soybean genotype. However, the relative abundance of major bacterial taxa, specifically nitrogen-fixing and/or aluminum-tolerant bacteria, was significantly different in the compartments of the BRH and/or SRH at phylum and genus levels, indicating genotype-dependent variations in rhizosphere bacterial communities. Strikingly, as compared with BRH and SRH, the WRH within the same genotype (BX10 or BD2) always had an enrichment effect on rhizosphere bacteria associated with nitrogen fixation

Continuous Conversion of Rice Starch Hydrolysate to 2-keto-D-gluconic Acid by Arthrobacter globiformis C224

Wen-Hua Teng,Wen-Jing Sun,Bin Yu,Fengjie Cui,Jing-Ya Qian,Jingze Liu,Liang Wang,Xiang-Hui Qi,Hua Wei 한국생물공학회 2013 Biotechnology and Bioprocess Engineering Vol.18 No.4

A continuous conversion process of rice starch hydrolysate to 2-keto-D-gluconic acid (2KGA) by Arthrobacter globiformis C224 was developed. Its feasibility for industrial application was also evaluated. Results showed that the initial cell concentration exceeding 1.25 g/L met the continuous 2KGA production at a stable dilution rate and media composition, while the dilution rate and feeding glucose concentration had a significant effect on 2KGA production performance. The optimal operating parameters were obtained as: 0.090/h of dilution rate and 171.0 g/L of feeding glucose concentration. Under these conditions, the steady state had a produced 2KGA concentration of 124.74 g/L, average volumetric productivity of 11.23 g/L/h,and yield of 0.97 g/g. In conclusion, continuous 2KGA production by the A. globiformis C224 strain would be a superior industrial process for the production of 2KGA in terms of its high 2KGA productivity and yield.

Amplification of single bulb mites by nested PCR: Species-specific primers to detect Rhizoglyphus robini and R. setosus (Acari: Acaridae)

Hui-Yi Li,Tsen Hua,Wen-Bin Yeh 한국응용곤충학회 2010 Journal of Asia-Pacific Entomology Vol.13 No.4

A major problem of using molecular amplicons for DNA amplification in mite systematics is that sufficient template cannot always be acquired from an individual mite. To solve this problem, we developed a nested PCR for DNA amplification of single Rhizoglyphus robini and R. setosus bulb mites. A dilution up to 105 of the DNA from a single egg, larva, nymph or adult contained enough templates for amplification of the target ribosomal region. However, the use of specific primers in the second PCR is necessary to reduce the generation of non-target DNAs from symbiotic organisms. Identification of bulb mites collected from seven sampling locations in Taiwan or of bulb mites that were used in simulated experiments in the presence of host plant tissues was unambiguous with specific PCR primers.

A Fast Kernel Regression Framework for Video Super-Resolution

( Wen-sen Yu ),( Ming-hui Wang ),( Hua-wen Chang ),( Shu-qing Chen ) 한국인터넷정보학회 2014 KSII Transactions on Internet and Information Syst Vol.8 No.1

A series of kernel regression (KR) algorithms, such as the classic kernel regression (CKR), the 2- and 3-D steering kernel regression (SKR), have been proposed for image and video super-resolution. In existing KR frameworks, a single algorithm is usually adopted and applied for a whole image/video, regardless of region characteristics. However, their performances and computational efficiencies can differ in regions of different characteristics. To take full advantage of the KR algorithms and avoid their disadvantage, this paper proposes a kernel regression framework for video super-resolution. In this framework, each video frame is first analyzed and divided into three types of regions: flat, non-flat-stationary, and non-flat-moving regions. Then different KR algorithm is selected according to the region type. The CKR and 2-D SKR algorithms are applied to flat and non-flat-stationary regions, respectively. For non-flat-moving regions, this paper proposes a similarity-assisted steering kernel regression (SASKR) algorithm, which can give better performance and higher computational efficiency than the 3-D SKR algorithm. Experimental results demonstrate that the computational efficiency of the proposed framework is greatly improved without apparent degradation in performance.

Effect of Deep Cryogenic Treatment on Machinability and Wear Mechanism of TiAlN Coated Tools during Dry Turning

Hui-Bo He,Wen-Qiang Han,Hua-Ying Li,Dong-Yang Li,Jun Yang,Tao Gu,Tao Deng 한국정밀공학회 2014 International Journal of Precision Engineering and Vol. No.

TiAlN coatings were deposited on the YT15 tungsten carbide inserts by magnetron sputtering technique. The TiAlN coated tools weredeep cryogenic treatment (DCT) at -196oC for 30 h. The dry turning tests of 40Cr steel were carried out to evaluate performancesof uncoated, no cryogenically treated (NCT) and DCT coated tools on the CA6140A lathe. The effect of the three kinds of tools oncutting forces, cutting temperature, surface qualities and tool wear had been investigated to assess the performance of DCT coatedtools. Results of the investigation showed that the cutting forces and cutting temperature obtained by DCT coated tools weresignificantly decreased in comparison with the uncoated and NCT coated tools, especially at higher cutting speeds. Flank wear ofthe DCT coated inserts was less than that of the NCT coated inserts under the same cutting conditions. The DCT coated insertsproduced a good surface finish and yield a tool life of about 65 min. The wear mechanisms of the DCT coated carbide tools are mainlyabrasive and adhesive wear, accompanied with diffusion and oxidation wear.

Preparation and Thermal Performance of Fullerene-Based Lead Salt

Hui-Juan Guan,Rufang Peng,Bo Jin,Hua Liang,Fengqi Zhao,Xing-Bing Bu,Wen-Jing Han,Shijin Chu 대한화학회 2014 Bulletin of the Korean Chemical Society Vol.35 No.8

C60 is widely investigated because of its unique structure. But its applications in solid propellant seem to be relatively neglected. C60 has more outstanding features than carbon black which is widely used as a catalyst ingredient of solid propellant. To combine the advantages of fullerene and lead salts, another good composite in propellant catalysts, we synthesized a kind of fullerene phenylalanine lead salt (FPL) and explored its thermal performances by differential thermal analysis (DTA) and thermogravimetry analysis (TGA). The results show it undergoes four exothermic processes started from 408 K. Combined TGA and X-ray diffractometer (XRD), the decomposition mechanism of FPL was derived by TG-IR and comparing IR spectra of FPL and its residues after burned to 327 °C, 376 °C and 424 °C, respectively. Effect of FPL on the decomposition characteristic of hexogen (RDX), a type of explosive in propellant, has been investigated using DTA at different heating rate, which shows the decomposition temperatures of the explosive are all reduced by more than 20 K. The corresponding activation energy (Ea) is decreased by 30 kJ·mol−1. So FPL has potential application as a combustion catalyst in solid propellant.

Phytochemistry and pharmacology of natural prenylated flavonoids

Hua-Wei Lv,Qiao-Liang Wang,Meng Luo,Meng-Di Zhu,Hui-Min Liang,Wen-Jing Li,Hai Cai,Zhong-Bo Zhou,Hong Wang,Sheng-Qiang Tong,Xing-Nuo Li 대한약학회 2023 Archives of Pharmacal Research Vol.46 No.4

Prenylated flavonoids are a special kind of flavonoid derivative possessing one or more prenyl groups in the parent nucleus of the flavonoid. The presence of the prenyl side chain enriched the structural diversity of flavonoids and increased their bioactivity and bioavailability. Prenylated flavonoids show a wide range of biological activities, such as anti-cancer, anti-inflammatory, neuroprotective, anti-diabetic, anti-obesity, cardioprotective effects, and anti-osteoclastogenic activities. In recent years, many compounds with significant activity have been discovered with the continuous excavation of the medicinal value of prenylated flavonoids, and have attracted the extensive attention of pharmacologists. This review summarizes recent progress on research into natural active prenylated flavonoids to promote new discoveries of their medicinal value.

Convenient hydrogel adhesion with crystalline zones

Wen-Tao Chen,Liangpeng Zeng,Ping Li,Yi Liu,Jing-Liang Huang,Hui Guo,Ping Rao,Wei-Hua Li 한국공업화학회 2023 Journal of Industrial and Engineering Chemistry Vol.117 No.-

Adhering soft hydrogels to hard substrates is challenging. Existing adhesion approaches mainly rely oninterfacial chemical bonds or physical interactions, which typically require complex fabrication processesor specific surface properties. Herein, we report a convenient approach to achieving effective hydrogeladhesion onto various hard substrates with in-situ formed crystalline zones by heating. Semicrystallizablepoly(vinyl alcohol) hydrogels were directly cast on various subtracts by a dryingswellingprocess, which demonstrates strong adhesion with adhesion energy as high as 890 J/m2. Theadhesion performance demonstrates an obvious positive correlation with the crystalline property. Therefore, the factors determining the crystalline degree, including the polymer type and preparationtemperature, demonstrate remarkable influences on the adhesion performance. Moreover, this adhesionperformance manifests high durability in harsh environments. Benefitting from the strong and durableadhesion performance, the crystalline gels can serve as a tie coating layer to joint various hydrogels,which demonstrate satisfactory antifouling ability. Therefore, this strategy may endow the materials withgreat potential for various practical applications in the future.

A Study on Cutting and Tribology Performances of TiN and TiAlN Coated Tools

Hua-Ying Li,Hui-Bo He,Wen-Qiang Han,Jun Yang,Tao Gu,Yuan-ming Li,류성기 한국정밀공학회 2015 International Journal of Precision Engineering and Vol. No.

TiN and TiAlN coatings were deposited on the surface of AISI 5140 steel and cemented carbide YT15 by magnetron sputteringtechnique (MSP). The reciprocating sliding tests of TiN and TiAIN coatings on the surface of AISI 5140 steel were performed toinvestigate the friction coefficients of coatings affected by various normal loads with friction pair of 304 stainless steel balls. Drymachining tests on AISI 5140 hardened steel were carried out with the TiN and TiAlN coated tools on a CA6140A lathe. The effectsof cutting speed on cutting forces and surface roughness of TiN and TiAlN coated tools were obtained and analyzed to assess thecutting performance of coated tools. The microcosmic micrographs of wear areas of coated tools were observed and investigated byscanning electron microscope and energy dispersive spectrum. The results show that the friction coefficients of TiN coatings are lowerthan that of TiAlN coatings. The cutting force of TiAlN coated tool decreases and flank wear resistance enhances in comparison withTiN coated tool. The wear form and mechanisms of TiN coated tool are mainly crater wear on the rake face and adhesive wear andabrasive wear on the flank face. The wear form and mechanisms of TiAlN coated tool are mainly adhesive wear, the breakage ofcutting edge and the damage of tip, accompanied with diffusion and oxidation wear.

Effect of Food Processing and Formulation Procedures on the Immunoregulatory Activity of Six Mushroom Proteins

Wen-I Chuang,Man-Hua Tung,Hui-Hsin Chang,An-Ju Chang,Fuu Sheu 한국원예학회 2006 한국원예학회 기타간행물 Vol.- No.-