http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Vo Hoang Duy,Nguyen Thanh Phuong,김학경(Hak Kyeong Kim),김상봉(Sang Bong Kim) 한국마린엔지니어링학회 2006 한국마린엔지니어링학회 학술대회 논문집 Vol.2006 No.-
A mixed method between H₂ and H<SUB>∞</SUB> control are widely applied to systems which has parameter perturbation and uncertain model to obtain an optimal robust controller. Brushless Direct Current (BLDC) motors are widely used for high performance control applications. Conventional PID controller only provides satisfactory performance for set-point regulation. However, with the presence of nonlinearities, uncertainties and perturbations in the system, conventional PID is not sufficient to achieve an optimal robust controller. This paper presents an approach to ease designing a Mixed H₂/H<SUB>∞</SUB> PID controller for controlling speed of Brushless DC motors and the genetic algorithm is used to solve the optimized problems. Numerical results are shown to prove that the performance in the proposed controller is better than that in the optimal PID controller using LQR approach.
Critical Factors of Subcontractor Evaluation and Selection: A Case Study in Vietnam
VO, Khoa Dang,PHAM, Cuong Phu,PHAN, Phuong Thanh,VU, Ngoc Bich,DUONG, My Tien Ha,LE, Loan Phuc,NGUYEN, Quyen Le Hoang Thuy To Korea Distribution Science Association 2021 The Journal of Asian Finance, Economics and Busine Vol.8 No.3
A contractor or a main contractor is a company with full capacity to construct all project's works for the owner. A subcontractor is an organization that works with the main contractor to execute and complete work packages for the project. Selecting an effective subcontractor will help the efficiency and success of any projects in the construction industry. Therefore, this study identified subcontractor evaluation factors in Vietnam by collecting questionnaire survey data from engineers and staffs in the construction industry project environment. An exploratory factor analysis (EFA) was then performed to identify the critical factors when evaluating and selecting the subcontractor in construction projects. Moreover, when considering the impact level in terms of the average value, the research results showed that the most critical concern was the subcontractor's reputation. Furthermore, the top five factors affecting the sub-contractor evaluation and selection are (i) reputation, (ii) price, (iii) construction techniques, (iv) ability to implement projects according to commitments, and (v) subcontractor competence (the team of workers, technician staff, engineers with full capacity according to regulations). These research results provide an overall perspective that will help main contractors develop suitable subcontractors' evaluation and selection factors in their projects in the construction industry.
VO, Minh Sang,NGUYEN, Trung Hau,THACH, Thao Vy,TRAN, Doan Vy,HOANG, Nguyen Huong Giang,PHAM, Ngoc Phuong Trang Korea Distribution Science Association 2022 The Journal of Asian Finance, Economics and Busine Vol.9 No.7
Maintaining and expanding brand equity is regarded as an essential component of brand development. Effective management of brand equity leads to more opportunities for brand extension and the ability to draw in more customers. Brand equity, in particular, has a positive impact on consumer purchase intention. The purpose of this study is to look into the relationships between brand equity and consumption intention from the perspective of Vietnamese customers of India's COVID-19 vaccine products. Primary data is aggregated from 475 Vietnamese citizens with different occupations and backgrounds 18 years of age or older. The findings of the study show that consumption intention is positively inspired by brand equity, including brand association and brand quality. If consumers perceive high brand equity, it will have a higher impact on promoting consumption intention to the brand. India's COVID-19 vaccine needs to invest more in building brand equity in the Vietnamese market if it wants to increase the consumption choices of Vietnamese people. To create a good brand association and brand quality for India's COVID-19 vaccine, it is necessary to focus on communicating the good properties of the Indian-made vaccine such as safe, high protective effect, high immunity and protection, and long duration of immunity of vaccines.
Line Impedance Estimation Based Adaptive Droop Control Method for Parallel Inverters
Phuong Minh Le,Xuan Hoa Thi Pham,Huy Minh Nguyen,Duc Duy Vo Hoang,Tuyen Dinh Nguyen,Dieu Ngoc Vo 전력전자학회 2018 JOURNAL OF POWER ELECTRONICS Vol.18 No.1
This paper presents a new load sharing control for use between paralleled three-phase inverters in an islanded microgrid based on the online line impedance estimation by the use of a Kalman filter. In this study, the mismatch of power sharing when the line impedance changes due to temperature, frequency, significant differences in line parameters and the requirements of the Plug-and-Play mode for inverters connected to a microgrid has been solved. In addition, this paper also presents a new droop control method working with the line impedance that is different from the traditional droop algorithm when the line impedance is assumed to be pure resistance or pure inductance. In this paper, the line impedance estimation for parallel inverters uses the minimum square method combined with a Kalman filter. In addition, the secondary control loops are designed to restore the voltage amplitude and frequency of a microgrid by using a combined nominal value SOGI-PLL with a generalized integral block and phase lock loop to monitor the exact voltage magnitude and frequency phase at the PCC. A control model has been simulated in Matlab/Simulink with three voltage source inverters connected in parallel for different ratios of power sharing. The simulation results demonstrate the accuracy of the proposed control method.
Line Impedance Estimation Based Adaptive Droop Control Method for Parallel Inverters
Le, Phuong Minh,Pham, Xuan Hoa Thi,Nguyen, Huy Minh,Hoang, Duc Duy Vo,Nguyen, Tuyen Dinh,Vo, Dieu Ngoc The Korean Institute of Power Electronics 2018 JOURNAL OF POWER ELECTRONICS Vol.18 No.1
This paper presents a new load sharing control for use between paralleled three-phase inverters in an islanded microgrid based on the online line impedance estimation by the use of a Kalman filter. In this study, the mismatch of power sharing when the line impedance changes due to temperature, frequency, significant differences in line parameters and the requirements of the Plug-and-Play mode for inverters connected to a microgrid has been solved. In addition, this paper also presents a new droop control method working with the line impedance that is different from the traditional droop algorithm when the line impedance is assumed to be pure resistance or pure inductance. In this paper, the line impedance estimation for parallel inverters uses the minimum square method combined with a Kalman filter. In addition, the secondary control loops are designed to restore the voltage amplitude and frequency of a microgrid by using a combined nominal value SOGI-PLL with a generalized integral block and phase lock loop to monitor the exact voltage magnitude and frequency phase at the PCC. A control model has been simulated in Matlab/Simulink with three voltage source inverters connected in parallel for different ratios of power sharing. The simulation results demonstrate the accuracy of the proposed control method.
Nguyen Hoang Loc,Vo Chau Tuan,Doan Huu Nhat Binh,Truong Thi Bich Phuong,김태금,양문식 한국생물공학회 2009 Biotechnology and Bioprocess Engineering Vol.14 No.5
We developed a cell suspension culture system for zedoary Curcuma zedoaria Roscoe), using 100 g fresh weight inoculum in a batch culture. The maximum cell biomass of 68.46 g/L fresh weight was obtained after 14 days of culture in a 10 L bioreactor with a pitch-blade impeller maintained at an agitation speed of 150 rpm and an aeration rate of 2.5 L/min. The accumulation of sesquiterpenes and polysaccharide in zedoary cells from 2 to 18 days was measured by HPLC and a phenol-sulfuric acid assay, respectively. The total polysaccharide concentration increased between 2 to 10 days of culture and reached a maximum value of 6.55%. HPLC revealed several eluted peaks of sesquiterpenes, which increased in amplitude from days 2 to 10. Furthermore, our results indicated that biotransformation occurred in the cell suspension, transforming certain sesquiterpenes into other types during culture
The Effect of the Country of Origin on Brand Trust: A Case Study for COVID-19 Vaccines in Vietnam
Minh Sang VO,Trung Hau NGUYEN,Thao Vy THACH,Doan Vy TRAN,Nguyen Huong Giang HOANG,Ngoc Phuong Trang PHAM 한국유통과학회 2022 The Journal of Asian Finance, Economics and Busine Vol.9 No.4
Many factors influence brand trust, including manufacturer prestige, product value and quality, country of origin, media marketing, experience, and brand relationship. The purpose of this study is to assess the impact of the nation of origin on brand trust, using Vietnam as a case study for India’s COVID-19 vaccine. A total of 407 Vietnamese people aged 18 and up participated in the survey. The findings of the study show that the nation of origin has a significant impact on brand trust. Specifically, the perceived country image has a negative effect on brand trust, the other two components of the country of origin are perceived value and perceived quality of product have a positive impact on brand trust in India’s COVID-19 vaccine. Research results show that if the perceived country image of the country of production is perceived negatively, then there will be a negative impact on brand trust. According to research findings, people in Vietnam who are 30 years old or older, have steady occupations, know about India, have used Indian products in the past, and have strong brand trust in India’s COVID-19 vaccinations. India needs to boost its country’s image and develop communication to increase brand trust in Vietnam.
Ngo Manh Dung,Vo Hoang Duy,Nguyen Thanh Phuong,Sang Bong Kim,Myung Suck Oh 대한전기학회 2007 International Journal of Control, Automation, and Vol.5 No.3
In this paper, a nonlinear controller based on adaptive sliding-mode method which has a sliding surface vector including new boundizing function is proposed and applied to a two-wheeled welding mobile robot (WMR). This controller makes the welding point of WMR achieve tracking a reference point which is moving on a smooth curved welding path with a desired constant velocity. The mobile robot is considered in view of a kinematic model and a dynamic model in Cartesian coordinates. The proposed controller can overcome uncertainties and external disturbances by adaptive sliding-mode technique. To design the controller, the tracking error vector is defined, and then the sliding surface vector including new boundizing function and the adaptation laws are chosen to guarantee that the error vector converges to zero asymptotically. The stability of the dynamic system is shown through the Lyapunov method. In addition, a simple way of measuring the enol'S by potentiometers is introduced. The simulations and experimental results are shown to prove the effectiveness of the proposed controller.