RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        Effect of curing mechanism on sulfuric acid corrosion resistance of geopolymer recycled aggregate concrete

        Zhenmeng Chen,Hui Liu,Pinghua Zhu,Haichao Li,Tianze Ge,Lei Yang,Chunhong Chen,Yanlong Dong 대한토목학회 2024 KSCE Journal of Civil Engineering Vol.28 No.4

        To explore the effect of curing mechanism on the mechanical properties and sulfuric acid corrosion resistance of the geopolymer recycled aggregate concrete (GRAC), the specimens were cured at high temperature (60oC, 80oC) for 6 h, 24 h and 48 h respectively, and then lasted up to 7 d at room temperature. After the curing period was over, the laboratory accelerated simulation test of specimens was carried out by the periodic immersion method: the GRAC specimens (φ 50 × 100 mm) were immersed in the sulfuric acid solution with pH = 1 for 5 d and then dried at room temperature for 24 h, with a total circulation of 90 d. The results showed that after being eroded by sulfuric acid solution, the GRAC specimens cured at 60oC for 48 h had higher compressive strength with 19.9 MPa, lower mass loss rate (only 0.23%) and neutralization depth (5.71 mm) than those under other curing time. The GRAC specimens cured 80oC for 24 h also had a good performance: compressive strength achieved 16.9 MPa and had lower neutralization depth (5.99 mm), which was less affected by sulfuric acid corrosion. However, the GRAC specimens cured at 60oC for 48 h had the better mechanical properties than that cured at 80oC for 24 h. Excessive high temperature curing (80oC) would lead to more voids and microcracks inside GRAC, and destroy the dense structure, thereby reducing mechanical property of concrete. These voids and pores provided more erosion channels for sulfuric acid solution, which accelerated the corrosion rate. From the point of view of energy saving and concrete performance, no more than 60°C of curing temperature is recommended for industrial use.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼