안전상비의약품 판매 이후 중독환자 특성 변화

김창영,이의중,이성우,김수진,한갑수,Kim, Chang Yeong,Lee, Eui Jung,Lee, Sung Woo,Kim, Su Jin,Han, Kap Su 대한임상독성학회 2018 대한임상독성학회지 Vol.16 No.1

Purpose: On November 15, 2012, sales of OTC (Over-The-Counter) drugs began at convenience stores, which changed the accessibility of some drugs. As a result, the exposure and access patterns of these drugs could have changed. In this study, we reviewed the changes in the characteristics of drug poisoning patients because of the reposition of nonprescription drugs according to the revised Pharmaceutical Affairs Act. Methods: A retrospective study was conducted to evaluate changes in characteristics of drug poisoning patients between 2008 and 2016. A registry was developed by an emergency medical center in a local tertiary teaching hospital, and patients who visited the center were enrolled in this registry. We compared two periods, from 2008 to 2012 (Pre OTC) and from 2013 to 2016 (Post OTC), for type of intoxicant, time from poisoning to visiting the emergency center, intention, psychiatric history, previous suicidal attempt, alcohol status, and emergency room outcomes. The primary outcome was the number of patients who took acetaminophen and NSAIDs (nonsteroidal anti-inflammatory drugs). Secondary outcomes were ICU admission rate, mortality rate, and number of patients who visited the ER when the pharmacy was closed after taking acetaminophen and NSAIDs (nonsteroidal anti-inflammatory drugs). Results: Among 1,564 patients, 945 and 619 patients visited the emergency room during pre and post OTC periods. The number of patients with acetaminophen and NSAIDs poisoning decreased from 9.2% to 6.1% (p=0.016). The ICU admission rate and mortality rate in the emergency room did not show significant results in the relevant patient groups, and so was the number of patients visiting ER when the pharmacy was closed taking acetaminophen and NSAIDs. Conclusion: Despite the sales of nonprescription drugs at convenience stores, the number of acetaminophen and NSAIDs poisoning patients decreased.

장기간 숙성에 따른 죽초 및 목초액의 이화학적 변화

구창섭 ( Chang Sub Ku ),문성필 ( Sung Phil Mun ),박상범 ( Sang Bum Park ),권수덕 ( Su Duk Kwon ) 한국목재공학회 2002 목재공학 Vol.30 No.4

송이 균환내 토양수분의 시공간적 변화

구창덕 ( Gu Chang Deog ),김재수 ( Kim Jae Su ),이상희 ( Lee Sang Hui ),박재인 ( Park Jae In ),안광태 ( An Gwang Tae ) 한국산림과학회 2003 한국산림과학회지 Vol.92 No.6

Water is critically important for Tricholoma matsutake(Tm) growth because it is the major component of the mushroom by over 90%. The mushroom absorbs water through the below ground hyphal colony. Therefore, the objectives of our study were to investigate spatio-temporal water changes in Tm colonies. This study was carried out at Tm fruiting sites in Sogni Mt National Park, where the below-ground fairy-ring colonies have been irrigated. To identify spatial water status within the Tm soil colony soil moisture and ergosterol content were measured at six positions including a mushroom fruiting position on the line of the colony radius. To investigate temporal soil moisture changes in the soil colony, Time Domain Reflectometry(TDR) sensors were established at the non-colony and colony front edge, and water data were recorded with CRlOX data logger from late August to late October. Before irrigation, whereas it was 12.8% at non-colony, the soil water content within Tm colony was 8.0% at 0-5cm from the colony front edge, 6.2% at 10-15cm and 6.5-7.5% at 20-40cm. And the content was 12.1% at 80cm distance from the colony edge, which is similar to that at the non-colony. In contrast, ergosterol content which is proportional to the live hyphal biomass was only 0.4pg/g fresh soil at the uncolonized soil, while 4.9 ㎍/g fresh soil at the front edge where the hyphae actively grow, and 3.8 .㎍/g fresh soil at the fruiting position, l.l ㎍/g at 20cm distance and 0.4㎍/g in the 40cm rear area. Generally, in the Tm fungal colony the water content changes were reversed to the ergosterol content changes. While the site was watered during August to October, the soil water contents were 13.5-23.0% within the fungal colony, whereas it was 14.5-26.0% at the non-colony. That is, soil water content in the colony was lower by 1.0-3.0% than that in the non-colonized soil. Our results show that Tm colony consumes more soil water than other parts. Especially the front 30cm within the hyphal colony parts is more critical for soil water absorption.

한ㆍ일 도시가스산업의 생산성 비교분석

최인수(In Su Choi),도범성(Bum Sung Do),박창수(Chang Soo Park),박중구(Jung Gu Park) 한국가스학회 2009 한국가스학회지 Vol.13 No.2

본고는 21세기 들어 고유가와 기후변화협약에 대응하여 중요성이 더해지고 있는 한국과 일본의 도시가스기업의 생산성을 분석하였다. 맘퀴스트 생산성 지수(Malmquist Productivity Index: MPI)를 통해 1997년부터 2005년까지 한국 30개, 일본 5개 기업들의 재무제표를 활용하여 기간 전체로, 그리고 수요의 구조변화를 나타내었던 2000년을 기준으로 이전과 이후의 생산성을 평가하였다. 분석의 결과, 첫째, 1996년~2005년 전체 기간의 MPI 누적지수에서 한국의 도시가스산업이 일본보다 상위에 있는 것으로 분석되었다. 그러나 기간별로 본 MPI 개선효과는 일본의 경우 1997~2000년 동안 -1.03%에서 2001~2005년 동안에는 -1.72%로 근소한 차이를 나타낸 반면, 한국의 경우에는 전반기 0.37%(금융외환위기를 경험한 98년 제외시 0.80%)이었지만 후반기에 -0.60%로 악화된 것으로 나타났다. 둘째, 후반기 한국의 MPI 악화는 기술적 효율성 지수보다는 기술변화 지수가 전반기 -0.88%(98년 제외시 0.29%)에서 후반기 -1.29%로 크게 악화된 것에 기인하는 것으로 분석되었다. 이에 따라 한국의 도시가스사업은 2001년 이후 악화되고 있는 생산성 증가율과 악화의 요인이 되고 있는 기술변화를 개선하는 정책적 노력이 필요하다. This article makes a comparative analysis on the productivity in gas distribution industry between Korea and Japan, using Malmquist productivity index(MPI). The estimated MPI during 1997~2005 shows that the productivity of Korean gas distribution industry has been generally higher than that of Japanese gas distribution industry. But Korean MPI made a drastic change from positive improvement (+ 0.37) during 1997~2000 to severe deterioration (-0.60) during 2001~2005, while Japan MPI has seldom changed. This change of Korean MPI is analyzed to result from the worsening of technical change rather than technical efficiency change. According to this result, Korean gas distribution industry needs to improve the technical change.

Projections of summertime ozone concentration over East Asia under multiple IPCC SRES emission scenarios

Lee, Jae-Bum,Cha, Jun-Seok,Hong, Sung-Chul,Choi, Jin-Young,Myoung, Ji-Su,Park, Rokjin J.,Woo, Jung-Hun,Ho, Changhoi,Han, Jin-Seok,Song, Chang-Keun Elsevier 2015 Atmospheric environment Vol.106 No.-

<P><B>Abstract</B></P> <P>We have developed the Integrated Climate and Air Quality Modeling System (ICAMS) through the one-way nesting of global–regional models to examine the changes in the surface ozone concentrations over East Asia under future climate scenarios. Model simulations have been conducted for the present period of 1996–2005 to evaluate the performance of ICAMS. The simulated surface ozone concentrations reproduced the observed monthly mean concentrations at sites in East Asia with high R<SUP>2</SUP> values (0.4–0.9), indicating a successful simulation to capture both spatial and temporal variability. We then performed several model simulations with the six IPCC SRES scenarios (A2, A1B, A1FI, A1T, B1, and B2) for the next three periods, 2016–2025 (the 2020s), 2046–2055 (the 2050s), and 2091–2100 (the 2090s). The model results show that the projected changes of the annual daily mean maximum eight-hour (DM8H) surface ozone concentrations in summertime for East Asia are in the range of 2–8 ppb, −3 to 8 ppb, and −7 to 9 ppb for the 2020s, the 2050s, and the 2090s, respectively, and are primarily determined based on the emission changes of NO<SUB>x</SUB> and NMVOC. The maximum increases in the annual DM8H surface ozone and high-ozone events occur in the 2020s for all scenarios except for A2, implying that the air quality over East Asia is likely to get worse in the near future period (the 2020s) than in the far future periods (the 2050s and the 2090s). The changes in the future environment based on IPCC SRES scenarios would also influence the change in the occurrences of high-concentrations events more greatly than that of the annual DM8H surface ozone concentrations. Sensitivity simulations show that the emissions increase is the key factor in determining future regional surface ozone concentrations in the case of a developing country, China, whereas a developed country, Japan would be influenced more greatly by effects of the regional climate change than the increase in emissions.</P> <P><B>Highlights</B></P> <P> <UL> <LI> Change in ozone level is determined by the combination of NO<SUB>x</SUB> and NMVOC emissions. </LI> <LI> Ozone level over East Asia would get worse in the near future (the 2020s) than far future. </LI> <LI> A high-concentration event generally increases and more frequently occurs in the future. </LI> <LI> Change in ozone air quality in a developing country depends more on emissions change. </LI> <LI> Change in ozone air quality in a developed country depends more on climate change. </LI> </UL> </P>

PET/CT 검사 환자의 피폭선량 경감을 위한 연구

김봉수,표성재,조용귀,신채호,조진우,김창호,Kim, Bong-Su,Pyo, Sung-Jai,Cho, Yong-Gyi,Shin, Chai-Ho,Cho, Jin-Woo,Kim, Chang-Ho 대한핵의학기술학회 2009 핵의학 기술 Vol.13 No.3

목적 : 환자의 피폭선량 감소를 위해 PET/CT검사 시Pitch를 조절하여 환자의 피폭선량을 줄일 수 있는 방법에 대해 고려해 보고 Pitch 조정이 CT 영상과 PET의 SUV값에 영향을 주어 변화가 있는지를 살펴 보고자 한다. 방법 : Siemens사의 Biograph Positron Emission Tomography (PET) Scanner (CT 형식 : TRCT-240-130 (WCT-240-130)을 사용하였다. 환자의 피폭선량 평가로는 CT 조사선량 측정기인 PTW-DIADOS 11003/1383를 사용하여 선량을 측정하였고 Pitch 조정이 CT 영상에 미치는 영향을 알아보기 위해 AAPM Standard Phantom을 이용하여 pitch 변화에 따른 CT 영상의 공간 분해능을 측정하여 비교하였다. 그리고, PET source consists of a solid radioactive cylinder phantom을 사용하여 Pitch 변화에 따른 Fusion 영상의 SUV값을 산출하여 PET/CT 영상에서 SUV값이 변하였는지 확인하였다. 결과 : 2slice CT scanner에서는 Pitch가 0.7~1.3까지는 방사선량이 크게 떨어지나 1.5~1.9까지는 방사선량의 감소가 작아졌으며 Pitch값이 커질수록 환자의 피폭선량이 작아지는 것을 알 수 있었다. 그리고 Pitch값의 증가에 따른 SUV값의 변화는 거의 없었으며. Pitch값이 PET SUV값에 영향을 주지 않는다는 것을 알 수 있었다. Pitch의 변화가 CT 영상에도 크게 영향을 주지 않는 것을 알 수 있었다. 결론 : 위의 결과로 PET/CT를 사용하는 병원은 영상의 왜곡이 없고 PET SUV값에 영향을 주지 않는 범위 내에서 각 병원에 맞는 Pitch값을 찾아서 환자의 피폭 경감을 위해 노력해야 할 것이다. 그리고 Multi-detector를 가진 CT scanner인 경우에 모두 해당 될 것이라 생각되며 향후 다른 장비에서도 이와 같은 실험이 필요하다 하겠다. Purpose: As the number of patients has increased since the installation of a PET/CT, we are now examining about 2500-3000 annually. We have realized that if we properly adjust a pitch under the same condition of a CT during a PET/CT exam, radiation quantity that reaches the patient can change. In order to reduce the exposure dose of a patient, the research examines a method of reducing the exposure dose of a patient by controlling the pitch during a PET/CT exam, viewing whether the adjustment of the pitch influences CT image and PET SUV. Methods: The equipment used is a Biograph Positron Emission Tomography (PET) Scanner (CT type: TRCT-240-130 (WCT-240-130)) of Siemens company. For the evaluation of exposure dose of a patient, we measured radiation quantities using a PTW-DIADOS 11003/1383, which is a CT radiation measurement instrument used by Siemens. We measured and analyzed the space resolutions of CT images caused by the change of pitches using an AAPM Standard Phantom in order to see how the adjustment of pitches influenced the CT images. In addition, in order to obtain SUVs caused by each change of pitches using a PET source made with a solid radioactive cylinder phantom, we confirmed whether the SUVs changed in the PET/CT images by calculating the SUVs of the fusion images caused by the change of pitches after obtaining CT and PET images and finishing the test. Results: 2slice CT scanner showed that radiation quantities largely dropped when pitches ranged from 0.7 to 1.3 and that the reduction of radiation quantities were smaller when pitches ranged from 1.5 to 1.9. That is, we found that the bigger pitch values are the smaller the radiation quantities of a patient are. Moreover, we realized that there is no change of SUVs caused by the increase of pitches and that pitch values do not influence PET SUVs and the quality of CT images. It is judged that using 1.5 as a pitch value contributes to the reduction of exposure dose of a patient as long as there is no problem in the quality of an image. Conclusions: When seeing the result of the research, hospital using a PET/CT should make an effort to reduce the exposure dose of a patient seeking pitch values appropriate for their hospital within the range in which there is no image distortion and PET SUVs are not influenced from pitches. We think that the research can apply to all multi-detectors having a CT scanner and that such a research will be needed for other equipments in the future.

한국인 직무 스트레스 측정도구의 개발 및 표준화

장세진,고상백,강동묵,김성아,강명근,이철갑,정진주,조정진,손미아,채창호,김정원,김정일,김형수,노상철,박재범,우종민,김수영,김정연,하미나,박정선,이경용,김형렬,공정옥,김인아,김정수,박준호,현숙정,손동국 大韓産業醫學會 2005 대한직업환경의학회지 Vol.17 No.4

Background and Purposes: Over the past three decades, numerous studies performed in Korea have reported that job stress is a determinant risk factor for chronic diseases and work disability. Every society has its own culture and occupational climate particular to their organizations, and hence experiences different occupational stress. An occupational stress measurement tool therefore needs to be developed to estimate it objectively. The purpose of this study is to develop and standardize the Korean Occupational Stress Scale (KOSS) which is considered to be unique and specific occupational stressors in Korean employees. Subjects and Methods: Data were obtained from the National Study for Development and Standardization of Occupational Stress (NSDSOS Project: 2002-2004). A total of 12,631 employees from a nationwide sample proportional to the Korean Standard Industrial Classification and the Korean Standard Occupational Classification were administered. The KOSS was developed for 2 years (2002-2004). In the first year, we collected 255 items from the most popular job stress measurement tools such as JCQ, ERI, NIOSH and OSI, and 44 items derived from the a qualitative study (depth interview). Forty-three items of KOSS, in the second year, were retained for use in the final version of the KOSS by using Delphi and factor analysis. Items were scored using conventional 1-2-3-4 Likert scores for the response categories. Results: We developed eight subscales by using factor analysis and validation process: physical environment (3 items), job demand (8 items), insufficient job control (5 items), interpersonal conflict (4 items), job insecurity (6 items), organizational system (7 items), lack of reward (6 items), and occupational climate (4 items). Together they explained 50.0% of total variance. Internal consistency alpha scores were ranged from 0.51 to 0.82. Twenty-four items of the short form of the KOSS (KOSS-SF) were also developed to estimate job stress in the work setting. Because the levels of the subscales of occupational stress were gender dependent, gender-specific standard norms for both the 43-item full version and the 24-item short form using a quartile for the subscales of KOSS were presented. Conclusion: The results of this study suggest that KOSS might be an appropriate measurement scale to estimate occupational stress of Korean employees. Further and more detailed study needs to be conducted to improve the validity of this scale.

Magnetization Analysis for Outer Rotor Brushless DC Motors Using Polar Anisotropic Ferrite Ring Magnets

Sung‑Il Kim,Su‑Jin Lee,Jeong‑Jong Lee,Chang‑Eob Kim 대한전기학회 2020 Journal of Electrical Engineering & Technology Vol.15 No.3

Ferrite-bonded magnets have been extensively used in small brushless DC (BLDC) motors for low torque applications such as fans and pumps. In particular, some motors of them with ferrite-bonded magnets, frequently called as plastic magnets, do not have a rotor core in order to reduce manufacturing costs and inertia of the rotating part. Accordingly, the magnetization distribution of the bonded magnets has a polar anisotropic direction to secure more magnetic fux. As a result, the magnetization orientation of the magnets is highly signifcant to accurately predict the performances of the BLDC motors. This paper deals with the magnetization analysis of the polar anisotropic ferrite ring magnet applied to an outer rotor type BLDC motor. The motor is employed for an electric water pump, and its rotor including the impeller consists of only the ferrite-bonded magnet material and made by injection molding. Consequently, a magnetizing fxture and an impulse magnetizer are not used for the magnetization of the outer rotor type motor. Instead, samarium–cobalt (SmCo) magnets having a relatively high curie temperature are applied for generating magnetic feld. Finally, this paper presents a process to determine the anisotropic orientations of a ferrite ring magnet by fnite element method. In addition, the validity of the analysis method is verifed by test results

신간회의 창립배경에 대하여

장상수 順天大學校 1989 論文集 人文社會科學篇 Vol.8 No.-

The leading thread of this paper is the tension relationship between class and nation. This paper examines this relationship through studying the establishment process of Shingan-hoe (New Korean Association), which was one of the national united fronts in the colonial period. There were many preconditions necessary for the establishment of Shingan hoe, and major ones among those were as follows: First of all, the threories legitimating the ntional united front or national movement had to be recognized by the socialists. These theories were basically originated from the objective needs colonial realities, and secondly from the policy of Comintern for the liberation of the oppressed nations. The other causes for forcing the establishment of Shingan-hoe were the split of nationalists into several factions generated from class differentiation and weakening of socialists after successive arrestedness. In chapter 2, the rising and development process of the theories legitimating the national united front would be examined, and in chapter 3, in addition to concrete practices of socialists for the national united front, internal backgrounds and piolicy of Comintern, which helped the emergence and development of such theories, would be described.

PET 직물의 plasma 중합에 의한 농색효과 (Ⅱ) : AA의 기상중합 Vapor Phase Polymerization of AA

張斗相,徐輔永,曺仁述 영남이공대학 산업기술연구소 1994 産業技術硏究 Vol.7 No.-

Poly(ethylene terephthalate) (PET) fabrics were polymerized with acrylic acid(AA) monomer in vapor phase by the use of low temperature plasma system and then, bathocromic effect was examined. In addition, several properties including penetration property to water drop of polymerized samples were examined. The results obtained from this study were as follows; 1. Bathocromic effect was improved in proportion to the reactor pressure, discharge output, and vapor phase polymerized time. 2. The polymers were made similar to scale of wool by vapor phase polymerization with AA monomer. 3. The air permeability and the penetration time were increased but the wicking property of vapor phase polymerized samples was not changed.