http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
공정표(Jeongpyo Kong),이영신(Youngshin Lee),이재옥(Jaeok Lee),이현승(Hyunseung Lee),김재훈(Jaehoon Kim),전준탁(Joontak Jun),곽성순(Sungsoon Kwak) 한국자동차공학회 2007 한국자동차공학회 춘 추계 학술대회 논문집 Vol.- No.-
The heavy duty diesel engine must have a large output for maintaining excellent mobility. The compacted graphite iron (CGI) is a material currently under study for the engine demanded for high torque, durability and stiffness. In this study, structural analysis of heavy duty engine were carried out with ABAQUS, and the fatigue analysis was executed with FEMFAT using the result of structural analysis. We considered about three loading condition; pre-fit load, assembly load, gas load. Safety factors were investigated by assuming the engine was operated under 2ㆍ10? cycles following the gas loading condition.
이정표(Jeongpyo Lee),박경은(Kyung-Eun Park),손초(Chao Sun),양상의(Shangyi Yang),김영억(Youngok Kim) 한국통신학회 2021 한국통신학회 학술대회논문집 Vol.2021 No.11
본 논문에서는 스마트폰에 내장된 가속도, 자이로, 지자기 센서가 결합된 IMU 센서를 사용하여 실내에서의 향상된 방향 추정에 대한 연구결과를 소개하고자 한다. 일반적으로 방향 추정은 지자기 센서를 통해 비교적 쉽게 할 수가 있으나, 실내에서는 지자기장의 교란이 심하기 때문에 지자기 센서 만으로는 방향을 추정하는 것이 어렵다. 따라서 본 논문에서는 IMU 센서로 수집되는 가속도, 자이로, 지자기 데이터를 활용하여 지자기 교란의 정도를 판단하여 스마트폰 방향 추정의 정확도를 향상시키는 방법을 제시하고자 하였다.
복합적인 Context 정보를 활용한 Smart Lock 개선 연구
이재용(Jaeyong Lee),이정표(Jeongpyo Lee),박대희(Daehee Park) 한국HCI학회 2018 한국HCI학회 학술대회 Vol.2018 No.1
최근 스마트폰 분야에 보안관련 이슈가 빈번하게 발생함에 따라 보안성에 사용성까지 고려한 Usable Security 분야에 대한 연구의 필요성이 대두되고 있다. 서비스 인터페이스 및 UX 디자인 분야에서도 사용성을 고려한 보안 기술 서비스에 대한 고민이 많이 필요하나 아직은 새로운 시도가 많이 없는 상황이다. 우리는 Google Android OS 의 Smart Lock 기능을 사용성을 통해 보안 문제를 해결하는 하나의 시도로 주목하였고, 본 연구를 통해 Google 의 Smart Lock 의 한계를 파악하고 좀 더 유용한 기능이 될 수 있는 방안을 제안하여 궁극적으로 사용자의 스마트 폰 보안성을 향상시키고자 한다.
이용일(Yong-Il Lee),이정표(Jeongpyo Lee),정홍석(Hong-Seok Jung) 대한기계학회 2006 대한기계학회 춘추학술대회 Vol.2006 No.6
The combustion of HFOs (heavy fuel oils) inevitably generates the emission of particulate matters. This study shows the shape, size distribution and trace metal contents of the particulate matters emitted from 7 kinds of HFOs. Isokinetic sampling was carried out at the exhaust duct to collect the particulate matters. Detail analysis was performed on the particulate samples using scanning electron microscopy (SEM) coupled with energy dispersive X-ray fluorescence spectroscopy (EDS). The size distributions of particulate matters were from 50 ㎚ to 28 ㎛ and closely related with combustion conditions. There were bigger size particulate matters for heavier emission case. Finally trace metal contents in particulate matters were also studied to understand the relation with parent oils.
차량용 고 분해능 디지털 MEMS 가속도센서 시스템 IC 개발
유광호(Kwangho Yoo),고형호(Hyoungho Ko),이아라(Ahra Lee),임재상(Jaesang Lim),이상윤(Sang-Yoon Lee),정덕균(Deog-Kyoon Jeong),박민하(Minha Park),장현수(Hyunsu Jang),이정표(Jeongpyo Lee),조동일(Dong-il Dan Cho) 한국자동차공학회 2006 한국자동차공학회 Symposium Vol.- No.-
This paper presents design, fabrication and measurement of a high resolution digital microelectromechanical systems (MEMS) accelerometer system IC. This system IC consists of a MEMS sensing element and a high resolution digital readout circuit. The MEMS sensing element is fabricated using the sacrificial/bulk micromachining (SBM) process. In order to protect the sensing element from environmental changes, wafer level hermetic packaging(WLHP) process is performed. The developed readout circuit offers 32-bit resolution using an 1-bit, 4th-order ΣΔ modulator and a digital decimator/demodulator. The proposed system IC provides a 128-㎐, 32-bit digital output with ±5g dynamic range, 0.52% nonlinearity, and 1.6*10? count/g scale factor.
The Design of a Sub-harmonic Dual-Gate FET Mixer
Jeongpyo Kim,Hyok Lee,Jaehoon Choi 한국전자파학회JEES 2003 Journal of Electromagnetic Engineering and Science Vol.3 No.1
In this paper, a sub-harmonic dual-gate FET mixer is suggested to improve the isolation characteristic between LO and RF ports of an unbalanced mixer. The mixer was designed by using single-gate FET cascode structure and driven by the second harmonic component of LO signal. A dual-gate FET mixer has good isolation Characteristic since RF and LO signals are injected into gate1 and gate2, respectively. In addition, the isolation characteristic of a sub-harmonic mixer is better than that of a fundamental mixer due to the large frequency separation between the LO and RF frequencies. As RF power was - 30 dBm and LO power was 0 dBm, the designed mixer yielded the - 47.17 dBm LO-to-RF leakage power level, 10 dB conversion gain, - 2.5 dBm OIP3, - 12.5 dBm IIP3 and - 1 dBm 1 dB gain compression point. Since the LO-to-RF leakage power level of the designed mixer is as good as that of a double-balanced mixer, the sub-harmonic dual-gate FET mixer can be utilized instead.
A Compact On-Frequency Indoor Repeater Antenna with High Isolation for WCDMA Applications
LEE, Youngki,KIM, Jeongpyo,CHOI, Jaehoon The Institute of Electronics, Information and Comm 2009 IEICE TRANSACTIONS ON COMMUNICATIONS - Vol.92 No.12
<P>In this paper, an indoor repeater antenna with high isolation for WCDMA application is proposed. The designed repeater has very small separation of 20mm between the donor and server antennas. The antenna has two resonance frequencies to cover the WCDMA band from 1.92GHz to 2.17GHz. The fabricated antenna has VSWR below 1.5, gain over 8dBi, and isolation between server and donor antennas less than -80dB in the WCDMA band.</P>
A Current-Mode Boost Converter with Wide Bandwidth Inductor Current Sensor
Jihwan Lee(이지환),Junyeol Jeon(전준열),Jeongpyo Park(박정표),Mingyu Jeong(정민규),Jingyu Kang(강진규),Changsik Yoo(유창식) 대한전자공학회 2018 전자공학회논문지 Vol.55 No.10
본 논문은 넓은 주파수 대역폭의 인덕터 전류 센서를 갖는 전류 모드 제어 부스트 컨버터를 소개한다. 제안하는 current-mirror 기반의 인덕터 전류 센서는 추가적인 feedback loop이 없어 높은 정확성과 넓은 주파수 대역폭을 갖는다. 부스트 컨버터는 180-nm BCDMOS 공정으로 제작되었으며 실리콘 면적은 2200-μm × 2200-μm이다. 부스트 컨버터는 1-MHz의 switching 주파수에서 동작하며 3-V의 입력 전압, 3.5-V에서 5-V의 출력 전압 범위를 가진다. 출력 전압 ripple은 33-mV 이내이며 최대효율은 95-%에 달한다. This paper presents a current-mode boost converter with wide bandwidth inductor current sensor. The proposed inductor current sensor is based on current-mirror without any feedback loop, allowing high accuracy and wide bandwidth. The boost converter has been fabricated in a 180-nm BCDMOS process occupying the silicon area of 2200-μm × 2200-μm. Operating at 1-MHz switching frequency, the boost converter provides the output voltage ranging from 3.5-V to 5-V from 3.0-V input. The output voltage ripple is smaller than 33-mV and the peak power efficiency is 95-%.
IMU 센서를 사용한 보행항법 기반 실내 위치 측위 연구
이정표,박경은,김영억,Lee, Jeongpyo,Park, Kyung-Eun,Kim, Youngok 한국재난정보학회 2021 한국재난정보학회 논문집 Vol.17 No.3
연구목적: 본 논문에서는 스마트 폰의 IMU센서를 사용한 PDR 방식의 실내 위치 추적 기법을 제안하고자 하며, 보다 정확한 추정을 위해 스마트 폰의 자세 변화로 인한 오류를 최소화하여 이동방향, 걸음 수, 보폭의 세 가지 정보를 추정하는 방법을 제안하고자 한다. 연구방법: 제안된 기법의 유효성과 성능을 실험을 통해 확인하고자 하였으며, 동일한 조건에서 기존 성능기법과 비교해 본 논문에서 제안하는 기법을 입증 하고자 한다. 연구결과: 실험을 통해 측정된 측위 오차는 기존 기법의 평균 오차가 1.84m이고, 제안된 기법의 평균 오차는 0.76m로서 제안된 기법이 기존 기법보다 보행자의 실제 이동 방향과 위치를 더욱 정확하게 추정할 수 있음을 확인하였다. 결론: 본 논문에서 제안하는 스마트 폰의 IMU센서를 사용한 PDR 방식의 실내 위치 추적 기법은 모든 국민이 보유한 스마트 폰을 활용하여 재난 시 신속한 대피를 위한 자신의 위치 인식 및 이동 방향 인식에 활용이 가능할 것으로 기대된다. Purpose: In this paper, we propose an indoor positioning scheme based on pedestrian dead reckoning using inertial measurement unit. By minimizing the effects of the orientation error of smart-phone, the more accurate estimation for the direction, the step count, and the stride can be achieved. Method: The effectiveness and the performance of the proposed scheme is evaluated by experiments, and it is compared with the conventional scheme in the same conditions. Result: The results showed that the positioning error of the proposed scheme was 0.76m, while that of the conventional scheme was 1.84m. Conclusion: Sine most people carry his/her own smart-phone, the proposed scheme can be helpful to recognize where he/she was and was heading when the fast evacuation is needed in indoors.