Effects of Ethanol Addition on the Efficiency of Subcritical Water Extraction of Proteins and Amino Acids from Porcine Placenta

Sung Hee Park,Jae Hyeong Kim,Sang Gi Min,Yeon Ji Jo,Ji Yeon Chun 한국축산식품학회 2015 한국축산식품학회지 Vol.35 No.2

In a previous study, hydrolysates of porcine placenta were obtained and the extraction efficiency for proteins and amino acids was compared between sub- and super-critical water extraction systems; optimum efficiency was found to be achieved using subcritical water (170°C, 10 bar). In this study, the effects of adding ethanol to the subcritical water system were investigated. The lowest-molecular-weight extraction product detected weighed 434 Da, and the efficiency of extraction for low-molecular-weight products was increased when either the concentration of ethanol was decreased, or the extraction time was lengthened from 10 min to 30 min. The highest concentration of free amino acids (approximately 8 mM) was observed following 30 min extraction using pure distilled water. The concentration of free amino acids was significantly lower when ethanol was added or a shorter extraction time was used (p<0.05). Color change of the solution following extraction was measured. There were no significant differences in color between lysates produced with different extraction times when using distilled water (p>0.05); however, using different extraction times produced significant differences in color when using 20% or 50% ethanol solution for subcritical extraction (p<0.05). The range of pH for the hydrolysate solutions was 6.4-7.5. In conclusion, the investigated extraction system was successful in the extraction of ≤ 500 Da hydrolysates from porcine placenta, but addition of ethanol did not yield higher production of low-molecular-weight hydrolysates than that achieved by DW alone.

Determining the Optimal Cooking Time for Cooking Loss, Shear Force, and Off-Odor Reduction of Pork Large Intestines

Sung-Su Kim,Yee Eun Lee,ho Hyun Kim,Joong-Seok Min,Dong Gyun Yim,Cheorun Jo 한국축산식품학회 2022 한국축산식품학회지 Vol.42 No.1

The objective of this study was to determine the optimal cooking time by considering the cooking loss, shear force, and off-odor reduction of pork large intestines. Commercial pork large intestines were purchased, quartered perpendicularly, and cooked in boiling water for 40, 120, 180, and 240 min. Cooking loss of the samples increased after 240 min of cooking (10.92, p<0.05) while shear force value was lower at 240 min (4.45) compared to that at other cooking times (p<0.001). The amount of major volatile organic compounds showed a decreasing trend with increasing cooking time. In particular, the amount of methyl pentanoate (17,528.71) and methyl isobutyrate (812.51), compounds with a relatively low odor threshold, decreased significantly after 120 min of cooking and no change was observed thereafter (p<0.05). In addition, the amount of 2-pentanol (3,785.65) and 1-propanol (622.26), possibly produced by lipid oxidation, significantly decreased at the same cooking time (p<0.001). In the principal component analysis, only the 40 min cooking time was significantly different from other cooking time by high amounts of 1-propanol, 2-pentanol, and methyl isobutyrate. In conclusion, in the present study, the optimal cooking time for pork large intestines was 120 min in terms of off-odor reduction, cooking loss, and shear force.

Fabrication and Characterization of an Anodic Aluminum Oxide Template with Variations in the Anodization Solution for pH Sensors

Jo, Ye-Won,Lee, Sung-Gap,Yeo, Jin-Ho,Kim, Kyeong-Min American Scientific Publishers 2016 Journal of Nanoscience and Nanotechnology Vol.16 No.11

<P>In this study, an electrolyte-dielectric-metal (EDM) device incorporating a high-k (high dielectric constant) Al2O3 sensing template from porous anodic aluminum-oxide (AAO) was fabricated through a two-step anodizing process for pH detection. In order to change the morphologies of the AAO template, the anodization solution was varied by controlling the electrolyte. Getting the AAO template having a structure through this experiment was EDM measure the pH sensitivity changes according to the surface area. AAO templates were characterized by X-ray diffraction and field-emission scanning electron microscopy (FE-SEM). The anodic aluminum oxide template for pH sensors went through the following steps: 1st anodizing step at 90 V for 6 h (0.3 M, H3PO4); 2nd anodizing step at 90 V for 1 min (H3PO4 0.3 M); and pore widening for 30 min. The device displayed a good sensitivity of 54.2 mV/pH.</P>

Ether-free polymeric anion exchange materials with extremely low vanadium ion permeability and outstanding cell performance for vanadium redox flow battery (VRFB) application

Cha, Min Suc,Jo, Sang Woo,Han, Seung Hui,Hong, Soo Hyun,So, Soonyong,Kim, Tae-Ho,Oh, Seong-Geun,Hong, Young Taik,Lee, Jang Yong Elsevier 2019 Journal of Power Sources Vol.413 No.-

<P><B>Abstract</B></P> <P>Ether-free poly(<I>p</I>-phenylene)-based anion exchange membrane materials with outstanding vanadium ion blocking properties are reported. The synthesized ionomers with a rigid backbone structure show small dimensional variations despite the high ion exchange capacities. Among the synthesized membranes, the QPPP-2 membrane with ion exchange capacity of 2.1 meq·g<SUP>−1</SUP> exhibits high anion (OH<SUP>−</SUP>, SO<SUB>4</SUB> <SUP>2−</SUP>, and Cl<SUP>−</SUP>) conductivity. The QPPP-2 membrane shows an extremely low diffusion coefficient (2.12 × 10<SUP>−9</SUP> cm<SUP>2</SUP> min<SUP>−1</SUP>) for VO<SUP>2+</SUP>, which is much lower than that of Nafion 115 (2.88 × 10<SUP>−6</SUP> cm<SUP>2</SUP> min<SUP>−1</SUP>), indicating the vanadium ion blocking property of QPPP-2. Moreover, the chemical and operational stabilities of the membranes are investigated <I>via</I> ex situ soaking tests in 0.1 M VO<SUB>2</SUB> <SUP>+</SUP> solution and in situ operation tests for 100 cycles, respectively. The vanadium redox flow battery single cell assembled with the QPPP-2 membrane exhibits a coulombic efficiency of 99%, voltage efficiency of 87%, and energy efficiency of 86% during 100 cycles at 80 mA cm<SUP>−2</SUP>. The excellent chemical, morphological, and electrochemical properties of the QPPP-2 membrane make it suitable for use in vanadium redox flow battery.</P> <P><B>Highlights</B></P> <P> <UL> <LI> AEMs are fabricated by a Ni(0)-catalyzed cross-coupling reaction. </LI> <LI> The synthesized ionomers indicated excellent dimensional and chemical stability. </LI> <LI> Ether-free polymeric AEMs showed extremely low vanadium ion cross over. </LI> <LI> The performance of developed AEM showed high EE (87%) with high capacity retention. </LI> </UL> </P> <P><B>Graphical abstract</B></P> <P>[DISPLAY OMISSION]</P>

미더덕의 생리활성이 향상된 아임계수 추출물의 제조

조민지(Min-Ji Jo),한지경(Ji-Kyoung Han),성수창(Su-Chang Sung),이승철(Seung-Cheol Lee) 한국식품영양과학회 2018 한국식품영양과학회지 Vol.47 No.11

미더덕의 이용 다변화를 위하여 아임계수 추출물을 제조하고 생리활성을 평가하였다. 미더덕은 동결건조 분말 상태로 10, 30, 60분 동안 다양한 온도(50, 100, 200, 300℃)에서 추출되었다. 아임계수 조건은 ACE 저해 활성, 항산화 활성, AChE 저해 활성과 같은 중요한 생리학적 특성을 상당히 증가시켰다. 200℃, 60분 추출물에서 가장 높은 ACE 저해활성을 나타냈으나 더 높은 온도 조건인 300℃에서는 급격히 감소하였다. DPPH 라디칼 소거능과 ABTS라디칼 소거능은 300℃, 30분 추출물에서 공통적으로 가장 높은 값을 보였고, AChE 저해 활성 또한 같은 경향을 나타냈다. 이러한 결과는 아임계수 추출이 미더덕의 생리활성을 증가시키는 유용한 가공방법이 될 수 있음을 시사한다. For diverse application of Styela clava (Korean name: miduduck) as a food material, subcritical water (SCW) extract was prepared and its physiological activity was evaluated. To accomplish this, S. clava powder (0.1 g) was placed in a stainless vessel containing 10 mL of distilled water, after which SCW extraction was carried out at 50, 100, 200, and 300℃ for 10, 30, and 60 min. SCW treatment significantly increased important physiological properties of the extract such as angiotensin converting enzyme (ACE) inhibitory activity, antioxidant activity, and acetylcholinesterase (AChE) inhibitory activity. The highest ACE inhibitory activity was found in samples subjected to SCW extraction at 200℃ for 60 min; however, the activity decreased at higher temperature (300℃). The SCW extract of S. clava prepared at 300℃ for 30 min showed the highest antioxidant activity [1,1-diphenyl-2-picrylhydrazyl and 2,2’-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) radical scavenging activities] and AChE inhibitory activity. These results indicate that SCW extraction might be a useful method for increasing the physiological activity of S. clava.

Effects of Ethanol Addition on the Efficiency of Subcritical Water Extraction of Proteins and Amino Acids from Porcine Placenta

Park, Sung Hee,Kim, Jae-Hyeong,Min, Sang-Gi,Jo, Yeon-Ji,Chun, Ji-Yeon Korean Society for Food Science of Animal Resource 2015 한국축산식품학회지 Vol.35 No.2

In a previous study, hydrolysates of porcine placenta were obtained and the extraction efficiency for proteins and amino acids was compared between sub- and super-critical water extraction systems; optimum efficiency was found to be achieved using subcritical water ($170^{\circ}C$, 10 bar). In this study, the effects of adding ethanol to the subcritical water system were investigated. The lowest-molecular-weight extraction product detected weighed 434 Da, and the efficiency of extraction for low-molecular-weight products was increased when either the concentration of ethanol was decreased, or the extraction time was lengthened from 10 min to 30 min. The highest concentration of free amino acids (approximately 8 mM) was observed following 30 min extraction using pure distilled water. The concentration of free amino acids was significantly lower when ethanol was added or a shorter extraction time was used (p<0.05). Color change of the solution following extraction was measured. There were no significant differences in color between lysates produced with different extraction times when using distilled water (p>0.05); however, using different extraction times produced significant differences in color when using 20% or 50% ethanol solution for subcritical extraction (p<0.05). The range of pH for the hydrolysate solutions was 6.4-7.5. In conclusion, the investigated extraction system was successful in the extraction of $\leq$ 500 Da hydrolysates from porcine placenta, but addition of ethanol did not yield higher production of low-molecular-weight hydrolysates than that achieved by DW alone.

Using Automated Container Type Culture System Hericium erinaceum Mushroom Production Technology

Woo-Sik Jo1,Sung-Hak Lee,Min-Gu Kang,Who-Won Park 한국버섯학회 2016 버섯 Vol.20 No.2

Time, place, and the high-tech industry to overcome barriers to the fusion of the so-called "smart agriculture" is changing the landscape of agriculture. Precision Agriculture's core temperature, humidity, location information, and summary information in real time, all significant ICT controlling technique. The system is a four-season container production for the mushroom cultivation temperature, humidity, illumination, self-regulation, such as carbon dioxide, the optimal environment for mushroom cultivation was implemented. Hericium erinaceum (also called Lion's Mane Mushroom, Bearded Tooth Mushroom, or Bearded Tooth Fungus) is an edible mushroom and medicinal mushroom in the tooth fungus group. Native to North America, Europe and Asia it can be identified by its tendency to grow all the spines out from one group (rather than branches), long spines (greater than 1 cm length) and its appearance on hardwoods. About 40 days of incubation 1.5kg oak sawdust was used as the test medium bag. The humidity was maintained more than 85~95% and temperature was 18~20°C, and CO2 density was 500~1,000ppm. The days for primordium formation showed us 6~12 days. The amount of fruitbody production was 110~260g per bag. This technique to establish new community support program in conjunction with the international movement, domestic sales and exports are also planned.

직접 가열식 열탈착 공정을 이용한 유류오염토양의 정화

민형식,양인호,정상조,김한승,Min, Hyeong-Sik,Yang, In-Ho,Jeon, Sang-Jo,Kim, Han-S. 한국지하수토양환경학회 2009 지하수토양환경 Vol.14 No.5

본 연구에서는 lab-scale의 열탈착 장치를 설계 및 제작하고 실제 유류오염 토양을 대상으로 다양한 운전조건에 따른 오염토양정화성능을 비교하였다. 대상 토양은 군부대로 사용되던 부지 내 유류저장소 부근 고농도 오염토로 선정하였고, 10 L 용적의 원통형 batch 형태의 직접 가열식 열탈착기를 사용하여 초기 TPH 농도 4476 ppm의 고농도 오염 토양시료를 다양한 운전조건에서 열탈착하여 처리효율 분석을 수행하였다. 열중량 분석을 통해 열탈착 실험에서 대상 오염물질을 제거하기 위한 토양 시료의 평균 가열온도는 $200-300^{\circ}C$가 적합한 것으로 확인하였다. Batch 형식의 운전을 통한 처리효율 분석 결과 토양 내 오염물질을 90% 이상 제거하기 위해서는 약 $200^{\circ}C$에서는 10분, 약 $300^{\circ}C$에서는 5분 이상의 처리 시간이 요구되었다. 함수율이 높고 덩어리진 토양일수록 처리효율, 특히 고분자 오염물질의 처리효율이 크게 감소함을 보였다. 따라서 풍건을 통하여 오염토양 내 수분을 저하시킨 후 분쇄 처리하여 열탈착기에 주입하는 것이 효과적이라 판단된다. 또한 처리 전 토양과 처리 후 토양의 물리화학적 특성 비교한 결과 고온에 의해 증발된 수분함량을 제외하고 나머지 특성들은 거의 변화가 없어 실제 복원현장에서 오염토양을 열탈착 공정을 이용하여 오염물질을 제거한 후 추가적인 후처리 과정 없이 처리토양을 원래 위치에 복원하는 것이 가능함을 확인하였다. 본 연구결과는 현장운전에서 오염물질의 제거 효율을 극대화하기위한 인자 결정 및 검증을 위한 기초자료로 활용될 수 있을 것으로 사료된다. A field soil highly contaminated with petroleum hydrocarbons (JP-8 and diesel fuels) was employed for its remediation by a lab-scale thermal desorption process. The soil was collected in the vicinity of an underground storage tank in a closed military base and its contamination level was as high as 4,476 ppm as total petroleum hydrocarbon (TPH). A lab scale directly-heated low temperature thermal desorption (LTTD) system of 10-L capacity was developed and operated for the thermal treatment of TPH contaminated soils in this study. The desired operation temperature was found to be approximately $200-300^{\circ}C$ from the thermal gravimetric analysis of the contaminated field soils. The removal efficiencies higher than 90% were achieved by the LTTD treatment at $200^{\circ}C$ for 10 min as well as at $300^{\circ}C$ for 5 min. As the water content in the soils increased and therefore they were likely to be present as lumps, the removal efficiency noticeably decreased, indicating that a pre-treatment such as field drying should be required. The analysis of physical and chemical properties of soils before and after the LTTD treatment demonstrated that no significant changes occurred during the thermal treatment, supporting no needs for additional post-treatments for the soils treated by LTTD. The results presented in this study are expected to provide useful information for the field application and verification of LTTD for the highly contaminated geo-environment.

Nanogenerators: Fully Rollable Transparent Nanogenerators Based on Graphene Electrodes (Adv. Mater. 19/2010)

Choi, Dukhyun,Choi, Min-Yeol,Choi, Won Mook,Shin, Hyeon-Jin,Park, Hyun-Kyu,Seo, Ju-Seok,Park, Jongbong,Yoon, Seon-Mi,Chae, Seung Jin,Lee, Young Hee,Kim, Sang-Woo,Choi, Jae-Young,Lee, Sang Yoon,Kim, Jo WILEY-VCH Verlag 2010 ADVANCED MATERIALS Vol.22 No.19

<B>Graphic Abstract</B> <P>The cover shows an image of fully rollable transparent nanogenerators synthesized using chemical vapor deposition grown large-scale graphene sheets as transparent electrodes and piezoelectric ZnO nanorod arrays. Sang-Woo Kim, Jae-Young Choi, and co-workers report on p. 2187 the electrical and structural stability of the nanogenerators, with excellent charge scavenging performance under external mechanical loads such as bending and rolling. This study shows that graphene-based nanogenerators are very promising for self-powered rollable transparent device applications. <img src='wiley_img_2010/09359648-2010-22-19-ADMA201090066-content.gif' alt='wiley_img_2010/09359648-2010-22-19-ADMA201090066-content'> </P>

Alignment Effects for Nematic Liquid Crystal on a New Diamond-like Carbon Layer

Seo, Dae-Shik,Jo, Yong-Min,Hwang, Jeoung-Yeon,Lee, Sang-Keuk The Korean Institute of Electrical and Electronic 2002 Transactions on Electrical and Electronic Material Vol.3 No.2

Alignment effects for nematic liquid crystal (NLC) and electro-optical (EO) characteristics of the ion beam (IB) aligned twisted nematic (TN)-liquid crystal display (LCD) with oblique ion beam exposure on the diamond-like carbon (DLC) thin film surface were studied. A high pretilt angle of 3.5$^{\circ}$ in NLC by ion beam exposure on the DLC thin film layer can be measured. An excellent voltage-transmittance (V-T) curve of the ion beam aligned TN-LCD was observed with oblique ion beam exposure on the DLC thin film surface for 1 min. Also, a faster response time for the ion beam aligned TN-LCD with oblique ion beam exposure on the DLC thin film surface for 1 min can be achieved.