Fatty Acid Synthesis Pathway Genetic Variants and Clinical Outcome of Non-Small Cell Lung Cancer Patients after Surgery

Jin, Xin,Zhang, Ke-Jin,Guo, Xu,Myers, Ronald,Ye, Zhong,Zhang, Zhi-Pei,Li, Xiao-Fei,Yang, Hu-Shan,Xing, Jin-Liang Asian Pacific Journal of Cancer Prevention 2014 Asian Pacific journal of cancer prevention Vol.15 No.17

Over-expression of de novo lipogenesis (DNL) genes is associated with the prognosis of various types of cancers. However, the effects of single nucleotide polymorphisms (SNPs) in these genes on recurrence and survival of non-small cell lung cancer (NSCLC) patients after surgery are still unknown. In this study, a total of 500 NSCLC patients who underwent surgery treatment were included. Eight SNPs in 3 genes (ACACA, FASN and ACLY) of the DNL pathway were examined using the Sequenom iPLEX genotyping system. Multivariate Cox proportional hazards regression and Kaplan-Meier curves were used to analyze the association of SNPs with patient survival and tumour recurrence. We found that two SNPs in the FASN gene were significantly associated with the recurrence of NSCLC. SNP rs4246444 had a significant association with lung cancer recurrence under additive model (hazard ratio [HR], 0.82; 95% confidence interval [95%CI], 0.67-1.00; p=0.05). Under the dominant model, rs4485435 exhibited a significant association with recurrence (HR, 0.75; 95%CI, 0.56-1.01; p=0.05). Additionally, SNP rs9912300 in ACLY gene was significantly associated with overall survival in lung cancer patients (HR, 1.41; 95%CI, 1.02-1.94, p=0.04) under the dominant model. Further cumulative effect analysis showed moderate dose-dependent effects of unfavorable SNPs on both survival and recurrence. Our data suggest that the SNPs in DNL genes may serve as independent prognostic markers for NSCLC patients after surgery.

Over-expression of GmHAL3 modulates salt stresses tolerance in transgenic arabidopsis

Na Guo,Ming-xia Wang,Chen-chen Xue,Dong Xue,Jin-yan Xu,Hai-tang Wang,Jun-Yi Gai,Han Xing,Jin-ming Zhao;Han Xing 한국식물학회 2016 Journal of Plant Biology Vol.59 No.5

The halotolerance protein HAL3, also known as SIS2, is a yeast protein that regulates the cell cycle and tolerance to salt stress through inhibition of the Ppz1 type 1 protein phosphatase. Although the roles of HAL3 have been demonstrated during the growth, development, and stress adaptation of Arabidopsis thaliana and Nicotiana tabacum, the function of HAL3 in other plant species, including soybean (Glycine max), has not been elucidated. In this study, GmHAL3a and GmHAL3b were isolated from Glycine max, and their roles were analyzed. GmHAL3a and GmHAL3b transcripts were detected in the roots, stems, leaves and seeds, with higher levels in the roots, and were induced by sodium chloride (NaCl), lithium chloride (LiCl), sorbitol, cold and ABA treatment. Overexpression of GmHAL3a or GmHAL3b in Arabidopsis accelerated the onset of flowering and resulted in more vigorous seed germination and increased tolerance to NaCl, LiCl, and sorbitol stress in seedlings, compared with wild type (WT) and empty vector control (VC) plants. Transgenic Arabidopsis plants accumulated proline and eliminated superoxide radical (O2 −) in response to the stress. In addition, transcription levels of the stress-related genes RD22 and P5CS1 were substantially higher in transgenic Arabidopsis than in WT and VC plants. Taken together, the data indicate that GmHAL functions as a positive regulator of the response to salt, lithium cations and sorbitol stress.

Comprehensive evaluation of high-temperature sintering behavior of sea sand vanadia-titania magnetite based on grey relational analysis

Zhen-xing Xing,Zhuang Huang,Gong-jin Cheng,He Yang,Xiangxin Xue,Guo-dong Zhang 한국화학공학회 2022 Korean Journal of Chemical Engineering Vol.39 No.12

Sea sand vanadia-titania magnetite is difficult to pelletize, and it is difficult for iron and steel enterprises touse it as a raw material for ironmaking. In this paper, the high-temperature physicochemical characteristics and sinteringbehavior of sea sand vanadia-titania magnetite were comprehensively studied and systematically evaluated. Thehigh-temperature metallurgical physicochemical characteristics of different iron ore powders and under different experimentalconditions were studied by the micro-sintering experimental system. The high-temperature sintering indexeswere comprehensively evaluated by the grey correlation analysis, and the influence of sea sand ore on sintering performancewas investigated by sintering pot experiment. The research results show that the high-temperature sinteringcharacteristics of sea sand vanadia-titania magnetite were the worst, and the grey correlation degree was the lowest. The high-temperature sintering characteristics of sintered blocks with sea sand ore were affected by changing the basicityand the addition amount of sea sand ore. When the basicity was 0.8 and the addition amount of sea sand ore was15 wt%, the evaluation index of grey relational analysis was the best. The vertical sintering speed and tumble indexwere slightly reduced by adding sea sand ore, but the sinter yield was improved and the particle size distribution of sinterwas optimized. The experimental results provide a certain data reference for the actual production of sinter with seasand vanadia-titania magnetite.

Ginsengenin derivatives synthesized from 20(R)-panaxotriol: Synthesis, characterization, and antitumor activity targeting HIF-1 pathway

Guo, Hong-Yan,Xing, Yue,Sun, Yu-Qiao,Liu, Can,Xu, Qian,Shang, Fan-Fan,Zhang, Run-Hui,Jin, Xue-Jun,Chen, Fener,Lee, Jung Joon,Kang, Dongzhou,Shen, Qing-Kun,Quan, Zhe-Shan The Korean Society of Ginseng 2022 Journal of Ginseng Research Vol.46 No.6

Background: Ginseng possesses antitumor effects, and ginsenosides are considered to be one of its main active chemical components. Ginsenosides can further be hydrolyzed to generate secondary saponins, and 20(R)-panaxotriol is an important sapogenin of ginsenosides. We aimed to synthesize a new ginsengenin derivative from 20(R)-panaxotriol and investigate its antitumor activity in vivo and in vitro. Methods: Here, 20(R)-panaxotriol was selected as a precursor and was modified into its derivatives. The new products were characterized by ¹H-NMR, ¹³C-NMR and HR-MS and evaluated by molecular docking, MTT, luciferase reporter assay, western blotting, immunofluorescent staining, colony formation assay, EdU labeling and immunofluorescence, apoptosis assay, cells migration assay, transwell assay and in vivo antitumor activity assay. Results: The derivative with the best antitumor activity was identified as 6,12-dihydroxy-4,4,8,10,14-pentamethyl-17-(2,6,6-trimethyltetrahydro-2H-pyran-2-yl)hexadecahydro-1H-cyclopenta[a]phenanthren-3-yl(tert-butoxycarbonyl)glycinate (A11). The focus of this research was on the antitumor activity of the derivatives. The efficacy of the derivative A11 (IC₅₀ < 0.3 µM) was more than 100 times higher than that of 20(R)- panaxotriol (IC₅₀ > 30 µM). In addition, A11 inhibited the protein expression and nuclear accumulation of the hypoxia-inducible factor HIF-1α in HeLa cells under hypoxic conditions in a dose-dependent manner. Moreover, A11 dose-dependently inhibited the proliferation, migration, and invasion of HeLa cells, while promoting their apoptosis. Notably, the inhibition by A11 was more significant than that by 20(R)-panaxotriol (p < 0.01) in vivo. Conclusion: To our knowledge, this is the first study to report the production of derivative A11 from 20(R)-panaxotriol and its superior antitumor activity compared to its precursor. Moreover, derivative A11 can be used to further study and develop novel antitumor drugs.

Chemical, optical, and electrical characterization of Ga2O3 thin films grown by plasma-enhanced atomic layer deposition

Xing Li,Hong-Liang Lu,Hong-Ping Ma,Jian-Guo Yang,Jin-Xin Chen,Wei Huang,Qixin Guo,Jijun Feng,David Wei Zhang 한국물리학회 2019 Current Applied Physics Vol.19 No.2

Thin Ga2O3 films were grown on Si (100) using trimethylgallium (TMG) and oxygen as the precursors through plasma-enhanced atomic layer deposition. The depositions were made over a temperature range of 80–250 °C with a growth per cycle of around 0.07 nm/cycle. Surface self-saturating growth was obtained with TMG pulse time ≥20 ms at a temperature of 150 °C. The root mean square surface roughness of the obtained Ga2O3 films increased from 0.1 nm to 0.3 nm with increasing the growth temperature. Moreover, the x-ray photoelectron spectroscopy analysis indicated that the obtained film was Ga-rich with the chemical oxidation states Ga3+ and Ga1+, and no carbon contamination was detected in the films after Ar+ sputtering. The electron density of films measured by x-ray reflectivity varied with the growth temperature, increasing from 4.72 to 5.80 g/cm3 . The transmittance of Ga2O3 film deposited on a quartz substrate was obtained through ultraviolet visible (UV–Vis) spectroscopy. An obvious absorption in the deep UV region was demonstrated with a wide band gap of 4.6–4.8 eV. The spectroscopic ellipsometry analysis indicated that the average refractive index of the Ga2O3 film was 1.91 at 632.8 nm and increased with the growth temperature due to the dense structure of the films. Finally, the I-V and C-V characteristics proved that the Ga2O3 films prepared in this work had a low leakage current of 7.2 × 10−11 A/cm2 at 1.0 MV/cm and a high permittivity of 11.9, suitable to be gate dielectric.

Sensitive and selective electrochemical detection of dopamine using an electrode modified with carboxylated carbonaceous spheres

Guo, Zheng,Seol, Myeong-Lok,Kim, Moon-Seok,Ahn, Jae-Hyuk,Choi, Yang-Kyu,Liu, Jin-Huai,Huang, Xing-Jiu The Royal Society of Chemistry 2013 The Analyst Vol.138 No.9

<P>A highly sensitive and selective electrochemical sensor of dopamine (DA) has been developed by employing carboxylated carbonaceous spheres to modify glassy carbon electrodes (GCEs). Scanning electron microscopy (SEM) and Fourier transform infrared (FT-IR) spectroscopy were used to characterize as-prepared carbonaceous spheres. The results show that the diameter of carboxylated carbonaceous spheres is uniformly 500 nm and that their surfaces mainly expose carboxyl groups with negative charges. Electrochemical measurements demonstrate that carboxylated carbonaceous spheres greatly improve the accumulation of positively charged dopamine, leading to good sensing performance on a modified GCE. Through applying the differential pulse voltammetric approach, linear calibration curves were obtained in a range of about 0.1 to 40 μM with a detection limit down to 30 nM. Furthermore, depending on the charge-based discrimination, the modified electrode displays good selective detection of DA and reliable anti-interference to UA and glucose besides a weak and negligible response to AA. Therefore, the carboxylated carbonaceous sphere introduced here is a good candidate to develop electrochemical sensors for the sensitive and selective detection of DA.</P> <P>Graphic Abstract</P><P>Carboxylated carbonaceous spheres (CCSs) reproducibly supported as advanced electrode coating for the determination of dopamine with high sensitivity, good selectivity and response stability. <IMG SRC='http://pubs.rsc.org/services/images/RSCpubs.ePlatform.Service.FreeContent.ImageService.svc/ImageService/image/GA?id=c3an36669c'> </P>

Hollow CuO nanospheres uniformly anchored on porous Si nanowires: preparation and their potential use as electrochemical sensors.

Guo, Zheng,Seol, Myeong-Lok,Kim, Moon-Seok,Ahn, Jae-Hyuk,Choi, Yang-Kyu,Liu, Jin-Huai,Huang, Xing-Jiu RSC Pub 2012 Nanoscale Vol.4 No.23

<P>Hollow CuO nanospheres have been prepared via a reduction reaction of copper ions on porous Si nanowires combined with calcination in air and uniformly anchored on their surfaces. Scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS) were employed to characterize and analyze as-synthesized samples. The results reveal that Si nanowires fabricated from heavily doped Si wafer are formed with a meso-porous structure by an Ag-assisted etching approach, and Cu nanoparticles are formed and uniformly decorated on the Si nanowires through a reaction of copper ions reduced by silicon. After annealing in air, Cu nanoparticles are in situ oxidized and transformed into CuO, leading to the formation of hollow nanospheres because of the Kirkendall effect. The diameter size of as-prepared CuO hollow spheres anchored on porous Si nanowires is mainly around 30 nm. Finally, in order to illuminate the advantages of this novel hybrid nanostructure of nanosized hollow spheres supported on porous nanowires, its electrochemical sensing performance to hydrazine as an example has been further investigated. The results confirm that it is a good potential application to detect hydrazine.</P>

Study on Mechanical Behaviors of Unsaturated Loess in terms of Moistening Level

Yichuan Xing,Denghui Gao,Songli Jin,Aijun Zhang,Minxia Guo 대한토목학회 2019 KSCE JOURNAL OF CIVIL ENGINEERING Vol.23 No.3

Water sensitivity is the special feature of unsaturated loess, which is the main cause of engineering problems in loessial regions. Previous studies have generally focused on potential changes on mechanical properties of loess when it is moistened to saturation, while the moistening process is often ignored. In order to investigate the mechanical behaviors of unsaturated loess during the moistening process, this paper takes unsaturated loess obtained from Ili, Xinjiang Autonomous Regions, China, as study object. A self-developed oedometer was used which was available for adding water into the soil sample during loading, measuring the coefficient of earth pressure at rest and matrix suction during moistening. Loess samples obtained from 3 buried depths were tested under 4 different vertical loads. The moistening level was defined to refer to the relative level of water content with regard to the initial and saturated water contents of a soil sample. Change tendencies of moistening deformation, the coefficient of earth pressure at rest as well as suction versus the moistening level were investigated.

Static behavior of bolt connected steel-concrete composite beam without post-cast zone

Ying Xing,Yun Zhao,Qi Guo,Jin-feng Jiao,Qing-wei Chen,Ben-zhao Fu 국제구조공학회 2021 Steel and Composite Structures, An International J Vol.38 No.4

Although traditional steel-concrete composite beams have excellent structural characteristics, it cannot meet the requirement of quick assembly and repair in the engineering. This paper presents a study on static behavior of bolt connected steel-concrete composite beam without post-cast zone. A three-dimensional finite element model was developed with its accuracy and reliability validated by available experimental results. The analysis results show that in the normal service stage, the bolt is basically in the state of unidirectional stress with the loss of pretightening can be ignored. Parametric studies are presented to quantify the effects of the post-cast zone, size and position of splicing gap on the behavior of the beam. Based on the studies, suggested size of gap and installation order were proposed. It is also confirmed that optimized concrete slab in mid-span can reduce the requirement of construction accuracy.

Copolymer-Nanoparticles Mixture in a Cylindrical Pore

Jun-Xing Pan,Yu-Qi Guo,Yu-Fang Han,Min-Na Sun,Jin-Jun Zhang 성균관대학교(자연과학캠퍼스) 성균나노과학기술원 2017 NANO Vol.12 No.4

Computer simulation is carried out for investigating the effect of nanoparticles on diblock copolymer morphology under cylindrical confinement. The phase diagrams of polymer nanocomposites with nanoparticle-block wetting strength and concentration of nanoparticles are obtained in different nanopores. In small diameter nanopore, there is almost no influence of nanoparticles on the diblock copolymer morphology because of the stronger confinement effect; in middle diameter nanopore, the system can self-assemble into various novel structures due to the interaction between confinement effect and nanoparticles effect; in large diameter nanopore, due to the stronger effect of nanoparticles, a disorder-order-disorder phase transition occurs with the wetting strength and concentration of nanoparticles increasing. This result can be useful in designing new nanocomposites with advanced electrical conductivity and/or mechanical strength.