몬테 카를로 시뮬레이션을 통한 발사관 구조 안전성 분석

박철우,이온수,신효섭,박진용,이동주,Park, Chul-Woo,Lee, Onsoo,Shin, Hyo-Sub,Park, Jin-Yong,Lee, Dong-Ju 한국시뮬레이션학회 2018 한국시뮬레이션학회 논문지 Vol.27 No.4

Launching system is designed to store the payload, withstand the rigors, and prevent it from rusting and damaging. The behavior during initial deployment of the missile is determined by production, assembly and insertion condition of a launching tube and a missile. The purpose of this research is to confirm the safety of a launching tube by statistically analyzing behavior of the missile, during initial deployment stage. Error parameters which effect initial behavior of the missile are selected and analyzed through Monte-Carlo Simulation. Based on the result of simulation, tip-off and stress distribution between rail and shoe is predicted by using the commercial analysis program called Recurdyn. Lastly, the safety factor is calculated based on yield strength of the material and maximum stress of the rail during the process of launching. The safety of the launching system is verified from the result of the safety factors. 발사관은 탑재물을 보관하고 외부 환경으로부터 부식 및 파손되는 것을 방지하는 역할을 한다. 발사관과 유도탄의 제작, 조립 그리고 장입 상태에 따라 발사할 때 유도탄의 초기 거동을 결정하게 된다. 본 연구의 목적은 유도탄이 발사관에서 사출될 때 유도탄의 초기 거동을 결정하는 요소를 통계적으로 분석하여 발사관의 안전성을 확인하는 것이다. 유도탄이 발사될 때 거동에 영향을 주는 오차 요소들을 선정한 후 Monte-Carlo 시뮬레이션을 수행하여 통계적으로 분석하였다. 시뮬레이션 결과를 바탕으로, 각 오차 요소들을 고려한 다물체 동역학 해석을 상용프로그램인 Recurdyn을 이용하여 동역학 해석을 수행하여 유도탄 발사할 때 발생하는 중력 침하 및 레일과 슈 사이에 발생하는 응력을 구하였다. 해당 결과를 바탕으로 현재 설계된 발사관에 대한 안전성을 검증하였다.

강유전 고분자 박막의 저차원 전기광학 특성

박철우,정치섭,Park, Chul-Woo,Jung, Chi-Sup 한국전기전자재료학회 2014 전기전자재료학회논문지 Vol.27 No.3

The electro-optic properties in Langmuir Blodgett films of poly (vinylidene fluoride trifluoroethylene) are investigated in the crossover region between two and three dimensions. The absence of finite size effect is observed in the films thinner than 20 nm, which confirms that these films are two dimensional ferroelectrics. The copolymer LB film of P(VDF-TrFE) exhibits the largest electro-optic response(26 pm/V) at 10 layer thickness. The cross-over behavior of electro-optic effect around the 10 layer thickness was discussed with the formation of nanomesa after thermal annealing.

EDISON Co-rotational Plane Beam-Dynamic Tip Load를 이용한 가진주파수 변화에 따른 외팔보의 자유단 진동 연구

박철우,주현식,류한열,신상준,Park, Chul-Woo,Joo, Hyun-Shig,Ryu, Han-Yeol,Shin, Sang-Joon 한국전산구조공학회 2015 한국전산구조공학회논문집 Vol.28 No.5

본 논문에서는 Euler-Bernoulli Beam(EB-beam) 및 신속 Fourier 변환을 이용하여 수치분석적 빔 모델 및 Co-rotational plane beam EDISON program(CR-beam)을 이용한 빔 모델의 가진주파수 변화에 따른 외팔보의 자유단 진동 연구를 수행하였다. 위의 두 빔 모델에서의 끝단에서는 진동이 시간이 지남에 따라 감소하다가 정상상태에 이르는 것을 확인하였다. 끝단에서 가진주파수가 증가함에 따라 구조적 감쇠에 의해 변위이 감소하는 경향을 보인다. 감쇠를 고려한 EB-beam과 CR-beam가 정상상태로 진입하는 경향이 비슷하나, 가진주파수는 정상상태가 나타나는 시간과 독립적임을 제시한다. In this paper, Euler-Bernoulli beam theories(EB-beam) are used, and Fast Fourier Transformation(FFT) analysis is then employed to extract their natural frequencies using both analytical approach and Co-rotational plane beam(CR-beam) EDISON program. EB-beam is used to analyze a spring-mass system with a single degree of freedom. Sinusoidal force with various frequencies and constant magnitude are applied to tip of each beam. After the oscillatory tip response is observed in EB-beam, it decreases and finally converges to the so-called 'steady-state.' The decreasing rate of the tip deflection with respect to time is reduced when the forcing frequency is increased. Although the tip deflection is found to be independent of the excitation frequency, it turns out that time to reach the steady state response is dependent on the forcing frequency.

3단 구성의 디지털 DLL 회로

박철우,강진구,Park, Chul-Woo,Kang, Jin-Ku 한국전기전자학회 2002 전기전자학회논문지 Vol.6 No.1

본 논문에서는 전부 디지털 회로로 구성된 고 해상도의 DLL(Delay Locked Loop)를 제안하였다. 제안된 회로는 위상 검출기, 지연 선택 블록, 그리고 각각의 지연 체인을 가지는 Coarse, Fine 그리고 Ultra Fine 위상조정 블록의 삼 단의 형식으로 되어 있다. 첫 번째 단은 Ultra Fine 위상조정블록으로 고 해상도를 얻기 위하여 Vernier Delay Line을 사용하였다. 두 번째와 세 번째 단은 Coarse와 Fine 위상조정블록으로 각각의 단위 지연 체인을 이루는 단위 지연 소자의 해상도 만큼의 위상 제어를 하게 되며, 두 단은 상당히 비슷한 구조를 이루고 있다. 회로는 HSPICE를 이용하여 공급 전압이 3.3V인 $0.35{\mu}m$ CMOS 공정으로 시뮬레이션 되었다. 시뮬레이션 결과 회로의 해상도를 약 10ps로 높일 수 있었으며, 동작 범위는 250MHz에서 800MHz 이다. This paper describes a high resolution DLL(Delay Locked Loop) using all digital circuits. The proposed architecture is based on the three stage of coarse, fine and ultra fine phase tuning block which has a phase detector, selection block and delay line respectively. The first stage, the ultra fine phase tuning block, is tune to accomplish high resolution using a vernier delay line. The second and third stage, the coarse and fine tuning block, are tuning the phase margin of Unit Delay using the delay line and are similar to each other. It was simulated in 0.35um CMOS technology under 3.3V supply using HSPICE simulator. The simulation result shows the phase resolution can be down to lops with the operating range of 250MHz to 800MHz.

강유전 고분자 박막의 상전이 특성

박철우,정치섭,Park, Chul-Woo,Jung, Chi-Sup 한국전기전자재료학회 2014 전기전자재료학회논문지 Vol.27 No.2

Phase transition properties of the copolymer films of polyvinylidene fluoride (PVDF) and trifluoroethylene(TrFE), P(VDF-TrFE), were studied with X-ray diffraction (XRD) and polarization modulated ellipsometry (PME). XRD studies on both Langmuir-Blodgett (LB) films and spin coated films exhibit conversions from ferroelectric phase to paraelectric phase at $108{\pm}2^{\circ}C$ on heating and paraelectric phase to ferroelectric phase at $78{\pm}2^{\circ}C$ on cooling. The presence of the ferroelectric-paraelectric phase transition is also confirmed by the PME technique for the first time in this study. PME was proved to be a very sensitive tool in the measurement of the structural changes at the nano-thickness films.

30000rpm급 금형가공용 고속 주축 시스템 설계 기술

박철우(Chul-Woo Park),최현진(Hyun-Jin Choi),장은실(Eun-Sil Jang),고영훈(Young-Hoon Koh),김충현(Chung Hyun Kim) 한국기계가공학회 2009 한국기계가공학회 춘추계학술대회 논문집 Vol.2009 No.6월

It is very important to develop the high speed spindle system among the core technologies in the high speed and intelligent machining system. In this paper, the safety of the main spindle system is evaluated by the analysis of avoiding resonance that is the analysis result of the natural frequency and the rotor dynamics. In this analysis, the main spindle design that is derived from the design goal of the high speed spindle system with 30,000rpm is used.

샤워헤드 제작을 위한 스파크 본딩 시스템의 구조해석에 관한 연구

박철우(Chul woo. Park),박상하(Sang ha. Park),최현진(Hyun jin. Choi),하재호(Jae ho. Ha),노상균(Sang kyun. Roh) (사)한국CDE학회 2013 한국 CAD/CAM 학회 학술발표회 논문집 Vol.2013 No.1

We have proceeded equipment development to manufacture showerhead, which is the core component for CVD(Chemical Vapor Deposition) equipment, by spark bonding using spark plasma sintering(SPS) method. Spark bonding equipment requires to develop power supply that generates large current, hydraulic system that applies even pressure to large area, press structure, vacuum chamber that prevents oxidation of joint metal in high temperature environment. In this study, we reviewed the stability of hydraulic press system with 100 ton of applied load using structure analysis. We carried out structure analysis for overall equipment based on initial design plan, and analyzed whether the joint area between upper plate, 4 columns and showerhead with 1,000mm diameter has even pressure over the joint area.

고정자 전류의 차이를 이용한 유도전동기의 센서리스 벡터제어

박철우(Park Chul Woo),최병태(Choi Byeong Tae),윤경섭(Youn Kyung Sub),구본호(Ku Bon Ho),권우현(Kwon Woo Hyen) 제어로봇시스템학회 2001 제어로봇시스템학회 국제학술대회 논문집 Vol.2001 No.10

부정의 작용역에 대하여

박철우(Chul Woo Park) 한국어학회 2013 한국어학 Vol.61 No.-

The purpose of this paper is to clarify the interrelation among syntactic structure, semantics structure and information structure of negative sentences in Korean. For this, firstly, we definitize the concept of ``scope of negation`` in the semantic and syntactic perspective to a syntactic unit which corresponds to a semantic proposition on the whole, on the contrary to the often assumed one that takes for granted that each constituent can be the scope of negation in a negative sentence. Secondly, we verify the boundary of the scope of negation against all the syntactic units in negative sentences, from the right categories of negative item ani(an) to the left ones of it. And then we conclude that the scope of negation in Korean negative sentences is within the limit of VP. Meanwhile we describe that V/VP-level adverbials can or cannot be inside of the negative scope, while sentential adverbials including modal adverbs, which are IP-related ones, and IP-level connectives should be outside of the negative scope. Lastly, we show the role of information structure in triggering focus/presupposition effect and disambiguating in the sentences which have scope ambiguity like quantified ones. Through these discussions, we can identify separated mechanisms which control syntactic-semantic structures and information structures. This finding offers us a useful cue to analyze multiple readings of negative sentences on the right track.

휴대용 정삼투 담수화 장치의 설계 및 평가에 관한 연구

박철우(Chul-Woo Park),강호(Ho Kang),정동호(Dongho Jung),차재철(Jaechul Cha),김대중(Daejoong Kim) 대한기계학회 2013 大韓機械學會論文集B Vol.37 No.3

식수의 보급이 원활하지 않은 경우를 대비하여 저에너지, 자급형 휴대용 담수화 장치를 설계하고 실험하여 그 활용 가능성을 제시하였다. 장비 구성이 단순한 정삼투 현상을 이용하여 휴대용 담수화 장치를 설계하였으며 중탄산암모늄을 이용하여 적은 에너지원을 이용한 담수화가 가능하도록 하였다. 여러 농도의 중탄산암모늄 수용액과 염화나트륨 수용액을 각기 사용하여 휴대용 담수화 장치의 담수화 성능을 조절할 수 있음을 확인하였다. 염 제거 실험을 통하여 음용 가능한 물을 확보하였고 온도를 증가시킴에 따라 그 시간을 단축시킬 수 있음을 확인하였다. This study aims to design a portable desalination device and discusses the feasibility of the device for overcoming a shortage of safe drinking water. A low-energy, self-supporting, and portable desalination device is designed based on forward osmosis (FO) using an ammonium bicarbonate solution. Experiments with various concentrations of ammonium bicarbonate solution and sodium chloride solution showed that the portable desalination device’s performance such as volume and flow rate of desalting water and time required satisfied drinking water standards. The device performance is controlled by varying the concentration and temperature of the solution.