http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
함중걸,백수현 한국조명전기설비학회 1997 조명.전기설비 Vol.11 No.2
고주파용 형광램프 시스템은 높은 발광효율 때문에 일반적으로 많이 사용되고 있다. 그러나, 이 고주파용 형광램프의 동작 특성은 동작주파수, 램프형상, 램프전압 및 전류값과 전자식안정기와 코아식안정기의 사용에 따라서 차이가 많이 난다. 그렇기 때문에 형광램프의 특성은 안정기의 특성을 고려한 형광램프 시스템의 동작특성 정합성에 매우 중요하다. 본 논문에서는 FHF32W(T8)형광램프의 고주파 특성을 가장 많이 사용되는 주파수 영역(12[kHz]∼50[kHz]에서 측정, 분석하였다. 특히 램프전류의 변화에 따른 형광램프의 비선형 임피던스를 모델링해서, 램프전류 변화에 의한 형광램프의 부임피던스 동작특성을 파악하여 고주파 형광램프의 최적 특성치를 선택할 수 있는 방법을 제시하였다. The high frequency fluorescnet lighting systems are widely used because of their high luminous efficacy. However, the performance of the fluorescnet lamp at high frequency reveals significant changes depending upon operating frequency, lamp shape, lamp voltage and current while adapting either an electronic or an magnetic ballast. Therefore the matching between the fluorescent lamp and the ballast is the major concern in designing a lighting system. In this paper, high frequency characteristics of the FHF32W lamp is measured in a range of frequencies from 12kHz to 50kHz. And we presented a model of a fluorescnet lamp with non-linear impedance depending on the lamp current. Finally, after identifying the operating condition under negative imped¬ance behavior as lamp current changing, we proposed a method of choosing the optimal parameter of a high frequency fluorescnet lamp and the result is analyzed.
함중걸,백수현 한국조명전기설비학회 1996 조명.전기설비 Vol.10 No.5
형광 램프는 에너지 효율이 높아 상업용 조명설비에 많이 사용된다. 형광램프 시스템의 설계에서 안정기의 설계는 형광 램프의 특성을 고려하는 것이 매우 중요하다. 특히, 시동시 형광램프의 과도특성은 안정기 설계시 좀더 많은 설계사양들을 제공하게 된다. 이 논문에서는 시동시 과도특성에 근거한 형광램프의 동작모델을 동기화로 나타냈다. 이 모델은 제조사가 다른 형광 램프에도 폭 넓게 적용이 가능하다. 실험에 의해 얻어진 결과를 동기회로 모델에 의한 Pspice 시뮬레이션에 의해 나타난 결과와 비교 한 결과, 본 논문에서 제시한 모델이 실질적으로 효용성이 있음을 나타냈으며, 자기식 안정기 및 전기식안정기의 설계시 형광램프의 시동과도특성에 의한 안정기 조건 설계들을 더욱 명확하게 알아낼 수 있었다. Fluorescent lamps are widely accepted to energy efficient commercial lighting applications. In designing a fluorescent lamp system, a ballast design heavily relies on the characteristic of a fluorescent lamp under consideration. Especially, at startup time, the transient characteristic of a fluorescent lamp puts much tighter specification of a design. In this paper, based on the transient characteristic at the startup time, a transient behavioral model of a fluorescent lamp is presented with an equivalent circuit. The model is applicable to the wide range of fluorescent lamps provided by different manufacturers. The experimental results are compared with the results provided by PSPICE simulation. The result shows the model is effective In practice. As a result, we could identify more accurate startup constraints to decide the design of either an electro mechanical or an electronic ballast.
함중걸,백수현,김일남,맹인재 한국조명·전기설비학회 1996 한국조명·전기설비학회 학술대회논문집 Vol.1996 No.-
형광램프 시스템의 설계에서 안정기의 설계는 형광램프의 특성을 고려하는 것이 매우 중요하다. 특히, 시동시 과도특성에 근거한 형광램프의 동작모델을 등가회로로 알아내기 위해 실험에 의해 얻어진 결과를 등가회로 모델링과 Pspice 시뮬레이션에 의해 나타난 결과와 비교 분석하였으며, 특히 고주파용 형광램프의 동작 특성은 동작주파수, 형상, 램프전압 및 전류값에 따라 차이가 많기 때문에 형광램프의 특성은 안정기의 특성을 고려한 형광램프 시스템의 동작특성 정합성에 매우 중요하다. 형광램프에 대한 고주파 특성으로 가장 많이 사용되는 주파수 영역(12Khz - 50khz)에 대해서 실험, 분석한 결과 형광램프의 부(負)임피던스 동작특성을 파악하고 고 주파 형광램프의 최적 특성치를 선택할 수 있는 방법을 제시하였다.