http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
ALBC3 합금의 쇼트피닝 분사거리에 따른 해수 내 캐비테이션 손상 평가
한민수· ( Min Su Han ),장석기 ( Seok Ki Jang ),김종신 ( Jong Sin Kim ),김성종 ( Seong Jong Kim ) 한국부식방식학회(구 한국부식학회) 2013 Corrosion Science and Technology Vol.12 No.5
Marine equipment exposed to harsh environments requires not only excellent corrosion resistance but also improvement of physical characteristics against natural material degradation. With growing interests in ocean energy resources, the higher reliability for marine equipment has become more important in terms of material characteristics. ALBC3 alloy represents excellent corrosion resistance and is widely used in corrosive environments. However, cavitation damage occurs frequently due to its poor durability in high flow rate of marine environment. In this research, shot peening technology was employed as a surface modification with shot peening stand-off distance to mitigate cavitation damage. The effects of shot peening on extent of cavitation damage and weight loss were evaluated for both shot peened and non-peened specimens. The results revealed that the application of shot peeing decreased cavitation damage for all experimental conditions in comparison with the non-peened specimens. The optimum stand-off distance was determined to be 10 cm, since more than 35 % of cavitation damage reduction was observed.
쇼트피닝 시간에 따른 동합금의 조직특성 및 전기화학적 특성의 변화
한민수,현광용,김성종,Han, Min-Su,Hyun, Koang-Yong,Kim, Seong-Jong 해양환경안전학회 2013 해양환경안전학회지 Vol.19 No.5
본 연구에서는 내식성이 우수한 동합금에 대하여 내구성 향상을 위해 쇼트피닝 시간을 변수로 표면 개질하여 전기화학적 특성과 조직 변화를 관찰하였다. 그 결과 쇼트피닝 후 표면에 전체적으로 요철이 발생하였으며, 시간이 증가할수록 커버리지 향상에 따른 균질화 현상이 관찰되었다. 또한 쇼트피닝된 모든 시험편에서 경도가 향상되었으며, 쇼트피닝 시간이 3.5분일 때 52 %의 경도향상을 나타냈다. 그리고 이때 전기화학적 특성은 쇼트피닝을 실시하지 않은 경우와 유사하였다. In this study, shot peening technique was employed with shot peening time for durability improvement and surface modification of copper alloy to investigate the electrochemical characteristics and microstructural variations. As a result of shot peening, roughness was distributed over the surface, and homogenization phenomenon was observed with increasing shot peening time due to the enhancement of coverage. The results revealed that hardness increased for shot peened specimens and particularly 3.5 mins of shot-peening time represented a hardness improvement of 52 %, showing similar electrochemical characteristics to that of the un-peened surface.
고대 안료의 성분분석 연구-쌍계사 탱화 안료를 중심으로
한민수,홍종욱,Han, Min-Su,Hong, Jong-Ouk 국립문화재연구소 2003 保存科學硏究 Vol.24 No.-
In ancient times, many kinds of different inorganic pigments were used as colorants for making objects. These pigments are still evidentin well known objects such as Danchung, mural painting and Buddhist painting. This study discusses the results obtained from an analysis of the pigments used on the Buddha pigments. The results can be briefly summarized as below; Firstly, the microcrystalline structures revealed on the cross section of analyzed pigments, samples of which were taken from various parts of Buddha pigments show that different sizes and shapes of pigment particle were used for different purposes such as coloring, toning of the pigments. The arrangement of pigments and their usages are varied according to the owner temples and the place where it was created. Secondly, a result of the analysis on the composition and structure of the pigments shows that the main components in their composition are: Red pigments - Red lead($Pb_3O_4$) and Cinnabar(HgS)Green pigments - Malachite[$CuCO_3$.$Cu(OH)_2$] and Prussian Blue[$Fe4(Fe(CN)_6)_2$]Gold pigments - pure gold(Au)Yellow pigments - Orpiment($A_s2S_3)White pigments - Lead Cyanamide[$Pb_3(CO_3)_2(OH)_2]Ultramarine pigments - Azulite[$Cu_3(CO_3)_2(OH)_2]Especially, we knew that pigments used on the Ssanggye temple not repaired to the artificial synthetic pigment
한민수,홍종욱,박지희,Han, Min-su,Hong, Jong-Uk,Park, Ji-hee 국립문화재연구소 2006 保存科學硏究 Vol.27 No.-
This study is to be investigated through firing experiment in studio in order to reveal a physical properties of celadon according to change firing temperature. The results can be briefly summarized as below; Firstly, in measurement of color chromaticity, samples of first firing in body were effective in differentiating of changed color in samples from each other but there of second firing were not. The color of the glaze was more effective change than that of the body. Secondly, bulk density of body was increased with temperature and it was attained highest point in $1200^{\circ}C$ Additionally, water absorption ratio was most rapidly changed between $1000^{\circ}C$ and $1200^{\circ}C$Thirdly, in the microstructural analysis, body of samples in first firing have not specific characteristics in the changed patterns of microstructure. body and glaze of samples in second firing have many that. Consequently, we knew that this experiment can be provided researcher with physical properties and firing mechanisms of celadon.