http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
지역난방 2차측 자동제어시스템 표준모델 개발에 관한 연구
이규진,김상호,엄재식,하태백 대한설비공학회 2017 대한설비공학회 학술발표대회논문집 Vol.2017 No.6
공공주택 및 건물 사용자의 시설은 난방 및 급탕의 공급온도를 외기온도에 따라 지속적으로 추종하도록 자동화시켜 운영하도록 유도하고 있으나, 사용자측 자동제어 시설기준 및 운영기자재의 적정기준 부재로 인하여 단순한 난방 및 급탕 기능에 필요한 유량만 조절해서 사용하고 있음에도 불구하고 빌딩자동화 등에 필요한 고기능을 가진 고가의 외산 자동제어시스템과 제어기기의사용이 전체 사용자 시설 제어기기의 90% 이상을 차지하고 있는 등 초기 설비투자 비용의 과다계상 과 AS의 불편함, 시설 고장시 고비용 발생의 원인이 되고 있으며, 사업자가 제시하는 운용표준 기준의 부재로 사용자 운영프로그램의 화면구성의 일괄기준이 없어 사용의 불편함을 초래하고 있다. 본 연구에서는 지역난방공사의 시스템 환경에 최적화된 2차측 자동제어시스템 표준사양을 개발하여, 사용환경을 개선하고 운영기준모델을 제시하고자 한다. 아울러 2차측 자동제어기기의 외산장비를 대체할 수 있는 표준 모델의 제작방향을 제시하여 공급제품군의 다양화 및 가격하락의 환경을 조정하고 신성장사업으로의 발전방향을 제시하고자 한다.
윤대호,채호병,김희산,김정구,김우철,하태백,장재혁,정준철,이수열 대한금속·재료학회 2020 대한금속·재료학회지 Vol.58 No.10
The thermal storage tank in a district heating system is a component that stores excess heat during normal operation and releases the stored heat to increase the efficiency of the system, when the heat source is stopped or additional demands occur. Recently, an obsolete thermal storage tank was dismantled for the first time since it began operation 30 years ago. In this work, the corrosion integrity of the obsolete thermal storage tank was evaluated by examining its appearance, thickness thinning, corrosion products, microstructure, and mechanical properties. Samples were taken at various locations (roof, shell, bottom) of the thermal storage tank, which enabled diagnosis of the respective environmental degradations. Severe corrosion was found in the roof edge plate due to corrosion under the insulation, and exhibited thinning exceeding ~49% of the designed thickness. In this location, the ferrite-pearlite band structure disappeared and deteriorated microstructures, such as decarburization and spheroidized pearlite, were measured, which resulted in a ~27% decrease in hardness. The inner surfaces of the bottom and shell plate were well covered with a magnetite film, and the degradation of the microstructure and mechanical properties showed a permissible limit in terms of ASTM A285/ A516. In addition, no particular drop in hardness was found in the weld zone of each plate.
지역난방 배열 회수 보일러의 유동 가속 부식 원인 고찰
홍민기,채호병,김영수,송민지,조정민,김우철,하태백,이수열,Hong, Minki,Chae, Hobyung,Kim, Youngsu,Song, Min Ji,Cho, Jeongmin,Kim, Woo Cheol,Ha, Tae Baek,Lee, Soo Yeol 한국재료학회 2019 한국재료학회지 Vol.29 No.1
Severe wall thinning is found on the tube of a low-pressure evaporator(LPEVA) module that is used for a heat recovery steam generator(HRSG) of a district heating system. Since wall thinning can lead to sudden failure or accidents that lead to shutdown of the operation, it is very important to investigate the main mechanism of the wall thinning. In this study, corrosion analysis associated with a typical flow-accelerated corrosion(FAC) is performed using the corroded tube connected to an upper header of the LPEVA. To investigate factors triggering the FAC, the morphology, composition, and phase of the corroded product of the tube are examined using optical microscopy, scanning electron microscopy combined with energy dispersive spectroscopy, and x-ray diffraction. The results show that the thinnest part of the tube is in the region where gas directly contacts, revealing the typical orange peel type of morphology frequently found in the FAC. The discovery of oxide scales containing phosphate indicates that phosphate corrosion is the main mechanism that weakens the stability of the protective magnetite film and the FAC accelerates the corrosion by generating the orange peel type of morphology.