복합신소재를 이용한 도로교통시설

최진우,윤순종,Choi, Jin-Woo,Yoon, Soon-Jeong 한국복합신소재구조학회 2010 복합신소재학회논문집 Vol.1 No.3

Polychaete Feeding Guilds from the Continental Shelf Off the Southeastern Coast of Korea

최진우,고철환,Choi, Jin Woo,Koh, Chul Hwan The Korean Society of Oceanography 1989 韓國海洋學會誌 Vol.24 No.2

The feeding guild classification proposed by Fauchald and Jumars (1979) and the relationship between this guild structure and the habitat environment were examined based on the quantitative polycheate samples collected on the continental shelf off the southeastern coast of Korea. Total 12 feeding guilds were found and the major feeding guilds of polychaetes were BSX (burrowing, sessile, non-jawed), SDT (surface deposit feeding, discretely motile, tentaculate), SST (surface deposit feeding, sessile, tentaculate), BMX (burrowing, motile, non-jawed), BMJ (burrowing, motile, jawed), SDJ (surface deposit feeding, discretely motile, jawed). There were more significant associations between feeding guilds and mean grain size (${\phi}$); SST and BMJ showed a positive correlation with mean phi, whereas CDJ (carnivore, discretely motile, jawed) and FDT (filter feeding, discretely motile, tentaculate), a negative value. The CDJ and CMX (carnivore, motile, non-jawed) guilds showed positive correlations with sand content, but only SST guild showed a positive correlation with clay. The heterogeneity of sediment or sorting value (${\phi}$) was highly associated with various feeding strategies of polychaetes. Surface deposit feeders and filter feeders, sessile, and tentaculate strategies were associated with poorly sorted or heterogeneous sediments. Some preliminary polychaete feeding surfaces were posed. Southern and northern coastal region composed of muddy sediment were characterized by SDJ; northern slope of mud by SST; central coast of mud by SDT, BSX; and BMX; southern offshore of sandy sediment by SDJ and IDT (interface feeding, discretely motile, tentaculate).

복합신소재를 이용한 상하수도관

최진우,윤순종,Choi, Jin-Woo,Yoon, Soon-Jong 한국복합신소재구조학회 2011 복합신소재학회논문집 Vol.2 No.2

직교이방성 판의 좌굴 및 압축재의 국부좌굴에 대한 해석적 연구

최진우,이강연,박정환,윤순종,Choi, Jin-Woo,Lee, Kang-Yeon,Park, Jung-Hwan,Yoon, Soon-Jong 한국복합신소재구조학회 2012 복합신소재구조학회논문집 Vol.3 No.1

이 연구에서는 직교이방성 판의 좌굴 및 직교이방성 판요소로 구성된 구조용 압축재의 국부좌굴에 대한 해석적 연구를 수행하였다. 섬유보강 폴리머 플라스틱 재료는 높은 비강도 및 비강성, 높은 부식저항성, 경량성 등 강재나 콘크리트와 비교해서 많은 장점을 가지고 있다. 특히, 펄트루젼 생산 방식은 섬유보강 폴리머 플라스틱 재료의 여러가지 생산방법 중 구조용 플라스틱 부재를 대량으로 생산하기에 가장 적합한 방법이다. 펄트루젼 생산방식은 부재의 축을 따라 주요 보강섬유가 배치되기 때문에 이 재료는 직교이방성으로 간주된다. 그러나, 펄트루젼 섬유보강 플라스틱 부재는 낮은 탄성을 갖고 있고 얇은 판요소로 구성되어 있기 때문에 압축하중이 재하될 경우 좌굴이 발생할 수 있다. 따라서, 이 부재를 설계하는데 안정성은 매우 중요한 문제가 된다. 이 연구에서는 기존의 연구를 따라서 직교이방성 판 및 직교이방성 판요소로 구성된 압축재의 국부좌굴에 대하여 검토하였으며, 국내에서 생산된 직교이방성 판요소로 구성된 압축재의 국부좌굴강도를 계산하였다. In this paper, we present the analytical study results pertaining to the buckling of the orthotropic plates and local buckling of structural compression members composed of orthotropic plate components. Fiber reinforced polymeric plastic (FRP) materials, have many advantages over conventional structural materials such as steel and concrete. The advantages of the FRP materials are high specific strength and stiffness, high corrosion resistance, right weight, etc. Among the various manufacturing methods, pultrusion process is one of the best choices for the mass production of structural plastic members. Since the major reinforcing fibers are placed along the axial direction of the member, this material is usually considered as an orthotropic (tranversely isotropic, more specifically) material. However, pultruded fiber reinforced plastic structural members have low modulus of elasticity and are composed of orthotropic thin plate components the members are prone to buckle. Therefore, stability is an important issue in the design of the pultruded FRP structural members. In this paper, the buckling of orthotropic plates and the local buckling of pultruded FRP structural members are investigated by following the previous research results and the local buckling strength of the member produced in the domestic manufacturer is found.

Finite element analysis for dynamic behavior of a machine tool structure fed in open loop control

최진우,이태홍,Choi, Jin-Woo,Lee, Tae-Hong The Korean Society of Manufacturing Technology Eng 2010 한국공작기계학회지 Vol.19 No.5

In this study, a fmite element model was developed for analysis of feeding a structure in open loop control The finite element analysis (FEA) can simulate dynamic behavior of the structure of a machine tool rapidly traveling with a screw feeding driving system. The feeding mechanism was implemented with screw element of the FEA tool used in this study. The procedure was developed for the dynamic transient FEA. First, motion parameters such as jerk and velocity were introduced for the structure to be fed in open loop control When its traveling distance was determined, set-points for the distance were generated based on the motion parameters. The set-points were applied to the FE model constructed for the traveling structure. The FEA was executed and evaluated. In this study, the FEA procedure was applied to the column of a machine tool and the dynamic behavior of the column was evaluated. The FEA helps in evaluation of the motion characteristics of a structure. The convergence time of the structure vibration posterior to feeding termination can be estimated and the stiffness of the flexible structure is also evaluated against jerk, and acceleration. It provides the feeding force which is helpful in selection of the feeding motor.

The Distribution and Feeding Guilds of the Polychaete Community in the West Coast off Kunsan, Korea

최진우,고철환,CHOI, JIN-WOO,KOH, CHUL-HWAN The Korean Society of Oceanography 1992 韓國海洋學會誌 Vol.27 No.3

The distribution pattern of macrobenthic polychaete worms and their feeding guild structures were investigated along the coastal region off Kunsan (southeastern Yellow Sea) during the winter season. The polychaete worms, the most dominant infauna, comprised 54 species in 30 families and showed their mean density of 300. indir./m$^2$). Dominant species in the study area were Stermaspis scutata, Lumbrineris cruzensis, Notomastus sp., Nephtys polybranchia, Praxillella affinis. Polychaeres were assigned to 12 feeding guilds and BMX (burrowing, motile, muscular pharynx) was the most dominant feeding guild (26%). Muddy sediments sustained more polychaete worms which showed burrowing (65%), motile (72%), and non-tentaculate strategies (92%), while sandy sediments contained more filter feeders (32%) and sessile (63%), and more tentaculate worms (49%). The sediment grain size was suggested to be the prime factor selecting the polychaete feeding guild.

이력 자료를 활용한 GPS 교통정보의 효율적인 필터링 방법

최진우,양영규,Choi, Jin-Woo,Yang, Young-Kyu 한국공간정보학회 2008 한국공간정보시스템학회 논문지 Vol.10 No.3

텔레매틱스 교통정보(해당 도로의 통과 시간이나 속도)를 제공하기 위해 교통자료를 수집하는 다양한 장비들이 존재하지만, 최근 GPS(Global Positioning System) 위성 신호가 민간에 공개된 이후 수신 기술의 발달과 더불어 교통 자료를 수집하는 수단으로써 많은 주목을 받고 있다. GPS를 사용하면 기존의 도로 상에 직접 매설하여 쓰이던 검지기에 비해 투자 유지비용이 낮고 차량 운행 축을 따라 지속적으로 세밀한 자료를 자동적으로 수집할 수 있다는 장점을 가진다. 하지만, 기존의 타 검지기에 의해 수집된 자료에 적용해 온 교통 정보 필터링 기법들을 GPS 자료에 그대로 적용하기에는 여러 가지 제약사항이 존재한다. 본 논문에서는 GPS로부터 수집되는 교통 자료 중 비정상적인 흐름으로 도로를 통과한 자료를 필터링하여 사용자들에게 보다 정확한 교통 정보를 제공할 수 있는 방법을 제시한다. 먼저 가까운 과거의 자료로부터 사분위수(quartile)와 해당 도로의 가중치에 의한 패턴을 구축하고, 이후 이를 실시간 자료에 적용해 비정상적인 자료를 필터링 해냄으로써 더욱 신뢰성 있는 교통정보를 생성할 수 있게 되는 것이다. 또한, 서울 강남대로를 대상으로 실제 GPS 수신기를 장착하고 운행한 차량들이 수집한 통행속도 자료를 바탕으로 이력 자료를 활용해 비정상적인 자료를 필터링한 대표 통행 속도가 기존의 필터링 방법들을 통한 값보다 더욱 정확한 결과를 보임을 증명하였다. For obtaining telematics traffic information(travel time or speed in an individual link), there are many kinds of devices to collect traffic data. Since the GPS satellite signals have been released to civil society, thank to the development of GPS technology, the GPS has become a very useful instrument for collecting traffic data. GPS can reduce the cost of installation and maintenance in contrast with existing traffic detectors which must be stationed on the ground. But. there are Problems when GPS data is applied to the existing filtering techniques used for analyzing the data collected by other detectors. This paper proposes a method to provide users with correct traffic information through filtering abnormal data caused by the unusual driving in collected data based on GPS. We have developed an algorithm that can be applied to real-time GPS data and create more reliable traffic information, by building patterns of past data and filtering abnormal data through selection of filtering areas using Quartile values. in order to verify the proposed algorithm, we experimented with actual traffic data that include probe cars equipped with a built-in GPS receiver which ran through Gangnam Street in Seoul. As a result of these experiments, it is shown that link travel speed data obtained from this algorithm is more accurate than those obtained by existing systems.

Macrobenthos Community in Keum-Mankyung-Dongjin Estuaries and its Adjacent Coastal Region, Korea

최진우,고철환,CHOI, JIN-WOO,KOH, CHUL-HWAN The Korean Society of Oceanography 1994 韓國海洋學會誌 Vol.29 No.3

Macrobenthic fauna in three Keum-Mankyung-Dongjin Estuaries and their nieghbouring coastal region in the west coast of Korea were sampled as 39 stations with van Veen grab to describe the distribution patterns of macrobenthos. Total 61 taxa from 10 faunal taxonomic groups and 5,636 individuals were collected. Abundance, species number, and faunal composition varied among three estuaries and coastal region. Dominant species from estuaries were similar to each other, but different from those of coastal region. Dominant species in estuarine regions were Prionospio cirrifera, potamocorbula amurensis. Nephtys californiensis, Glycera chiron and Glycinde sp, those from coastal area were Mactra chinensis. Magelona japonica, Owenia fusiformis. Anaitides Korean and Nephtys polybranchia. Two most dominant species in estuaries, Potamocorbula amanuensis and Prionospio cirrifer were not found elsewhere in Korean waters. The patchy distribution of dominant species and low species richness were reflected in the low species diversity Filter feeders were a major component in estuaries. High proportion of carnivores and low percentage of subsurface deposit feeders seemed to be a typical trophic composition in the study area. the distribution pattern of macrobenthos was related with the salinity and sediment types.

수상 부유식 태양광발전 구조물의 구조적 성능 평가

최진우,서수홍,주형중,윤순종,Choi, Jin Woo,Seo, Su Hong,Joo, Hyung Joong,Yoon, Soon Jong 대한토목학회 2014 대한토목학회논문집 Vol.34 No.5

최근 화석연료의 과도한 소비로 인해 다양한 환경문제가 발생하고 있으며, 이에 대한 대안으로 신재생에너지의 중요성과 그에 대한 시설의 수요가 꾸준히 증가하고 있다. 이러한 수요를 만족하기 위하여, 다수의 태양광발전 구조물들이 건설, 계획되고 있다. 그러나 대부분의 태양광발전 시설들은 육지에 시공되고 있기 때문에 토지 이용에 따른 건설비의 증가와 토지 개간에 의한 추가적인 환경문제 등이 발생하고 있다. 이러한 문제점을 해결하기 위하여 최근 국내에서는 FRP를 활용한 수상 부유식 태양광발전 구조물에 대한 연구를 지속적으로 수행하고 있다. FRP는 높은 강도와 내부식성 및 작은 단위중량 등의 장점을 가지고 있기 때문에 최근 토목분야에서 각광받고 있으며, 이러한 재료적 특성은 자중에 따라 부력체의 크기가 결정되는 수상 구조물에 특히 유용하다. 이 연구에서는 수상 부유식 태양광발전 구조물과 구조물을 구성하는 SMC FRP 수직재의 구조적 성능을 평가하기 위한 해석적, 실험적 연구를 수행하였다. 수상 부유식 태양광발전 구조물은 유한요소해석을 통해 정적거동을 평가하고, 실험을 통해 동적거동을 평가하였다. 또한 SMC FRP 수직재는 유한요소해석을 통해 구조안전성 및 좌굴안정성을 평가하였으며, 실험을 통해 압축 및 인발 하중에 대한 구조적 거동 특성을 검토하였다. 검토 결과 펄트루젼 FRP (pultruded FRP)와 SMC (Sheet Modoling Compound) FRP로 구성된 구조시스템은 외부하중에 대한 안전성을 확보하고 있음을 확인하였다. In recent years, numerous environmental problems associated with the excessive use of fossil fuel are taking place. For an alternative energy resource, the importance of renewable energy and the demands of facilities to generate renewable energy are continuously rising. To satisfy such demands, a large number of photovoltaic energy generation structures are constructed and planned with large scale. However, because these facility zones are mostly constructed on land, some troubles are occurred such as rising of construction cost due to the cost of land use, environmental devastation, etc. To solve such problems, the floating type photovoltaic energy generation system using FRP members have been developed in Korea. FRP members are recently available in civil engineering applications due to many advantages such as high strength, corrosion resistance, light weight, etc. and they are suitable to fabricate the floating structures because of their material properties. In this study, the analytical and experimental investigations to evaluate the structural performance of floating PV generation structure and SMC FRP vertical member which is used to fabricate the structure were conducted. The static and dynamic performances of floating PV generation structure are evaluated through the FE analysis and the experiment, respectively. Moreover, the structural safety evaluation and buckling analysis of SMC FRP vertical compression member are also conducted by the FE analysis, and the structural behavior of SMC FRP member under compression and pullout is investigated by the experiments. From this study, it was found that the structural system composed of pultruded FRP and SMC FRP members are safe enough to resist externally applied loads.

Distribution Pattern of Polychaete Worms on the Continental Shelf and Slope of the East Sea (Southwestern Sea of Japan), Korea

최진우,고철환,CHOI, JIN-WOO,KOH, CHUL-HWAN The Korean Society of Oceanography 1990 韓國海洋學會誌 Vol.25 No.1

본 연구는 동해의 대륙붕 및 대륙사면에서의 다모류 군집의 종 조성과 분포을 알 기 위해 수행되었다. 다모류의 채집은 1985년 4월에 1987년 4월, 10월의 3회의 항해 동안 이루어졌다. 채집된 다모류는 총 36과 112 종이었으며, 우점다모류는 Chaetozone setosa, Aglaophanus malmgrent Ampharete arctica Lerchellules horikoshii, Tharyx sp., 와 Magelona pacifica 등이었다. 본 조사지역의 다모류 군집에 대한 주요 기여종 들은 복반부의 냉수종들이었다. 특히 우점종들은 대륙붕에서부터 대륙사면 상부 혹은 중부에서 주로 분포하며, 특정 서식 깊이를 보였다. 전반적인 평균서식밀도를 300개체 / m$^2$이며, 송풍부도는 15종/0.2 m$^2$ 정도이다. 평균서믹밀도와 종풍부도지수는 600 m 나 그 이상의 수심에서 뚜렷한 변화를 보였다. 우점종의 평균서식밀도와 밀접한 상관 관계를 보인 물리적 환경은 수심, 수온, 니질함량, 평균입도 등이었다.