http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
R/C조 외측 보-기둥 접합부의 정착설계에 대한 해석적 연구
최기봉 한국전산구조공학회 1992 한국전산구조공학회논문집 Vol.5 No.4
외측 보-기둥 접합부에 정착된 곧은 보 주철근의 인발거동을 예견하기 위한 해석모델이 개발되었다. 이 모델은 외측조인트에 수직방향으로 콘크리트를 구속하기 위하여 횡방향 철근을 배치한 상태의 구속조건(confined condition)하에서 이형철근의 부착특성에 관한 정착철근의 직경, 콘크리트 압축강도, 항복강도, 철근간격 및 주압력(column pressure)에 대한 영향을 고려할 수 있는 국부부착에 관한 시뮬레이션을 구체화하였다. 이 연구에서 채택된 해석 기법은 횡방향 철근이 배근된 공시체에 매입한 곧은 이형철근에 대한 인발실험의 결과를 만족하게 예견하였다. ACI-ASCE 352 위원회가 제안하고 있는 외측조인트 상태에서의 정착 철근길이에 관한 규정이 개발된 해석접근법을 사용해 평가 되었다. 이 해석 평가의 결과는 현재의 외측조인트의 구속조건에서의 정착길이에 대한 규정이 너무 안정적인 측면에 있다는 것을 암시하고 있다. An analytical model was developed for predicting the pullout behavior of straight beam longitudinal bars anchored at exterior beam-column connections. The model incorporates a local bond constitutive simulation capable of considering the effects of anchored bar diameter, yield strength and the spacing, concrete compressive strength, and column pressure on the bond characteristics of deformed bars in confined conditions of exterior joints. The analytical techniques adopted in this study were shown to satisfactorily predict the results of pullout tests on straight bars embedded in confined concrete specimens. An evaluation of the ACI-ASCE Committee 352 development length requirements in exterior joint conditions was made using the developed analytical approach. The results of this analytical evaluation are indicative of the conservatism of the current development length requirements in the confined conditions of exterior joints.
최기봉 한국산업안전학회 1996 한국안전학회지 Vol.11 No.4
사면안정 해석에 있어서 기존의 연구는 대부분 침투력의 값을 고려하지 않고 안전율을 계산하여 왔다. 그러나 비정상 침투시 침투력은 안전율에 많은 영향을 미친다. 따라서 본 연구에서는 사면안정해석에 있어서 침투력의 영역이 사면의 안전율에 미치는 영향이 큰 것을 확인하기 위해서 Bishop's Simplified Method를 이용하여 이론적으로 침투력을 고려한 안전율계산 수식을 유도하였다. 사면안정 이론식의 전개방법은 제체에 침윤선이 형성될 경우 침윤선을 기준으로 각 절편을 수중상태와 습윤상태로 구분하고, 이 습윤상태의 절편토체에 작용하는 침투력을 고려하여 사면안정수식을 해석했다. The main purpose of this study was to develop a useful method for analysing slope stability by seepage force. The stability of an embankment impounding a water reservoir is highly depend upon the location of seepage line with the embankment, it is important to illustrate the seepage phenomenon. Of particular interest is the stability following a rapid rise change of resorvoir level. Seepage forces in embankments are easily determined if frictional forces are expressed in relation to hydraulic gradient i. Seepage forces can combine with soil weights to improve stability or worsen it, depending on the direction in which the forces act in relation to the geometric cross section.