http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
철도차량 기동전원 종료 시 비상인터폰 오동작 개선에 관한 연구
주영복,김규식 한국도시철도학회 2017 한국도시철도학회논문집 Vol.5 No.4
본 연구는 철도차량 기동전원 종료 시 비상인터폰 오동작 즉, 출력증폭기의 제어전원 DC24[V]이 순간적으로출력되어 비상인터폰이 일시적으로 동작되어 비상제어전원 회로 접접이 구성되어 DC100[V] 배터리 전원이 공급되는 문제점이 간헐적으로 발생되는 현상에 대해 원인분석을 실시하였고, 출력증폭기 전원공급기 모듈의 리셋회로 제어소자 문제임을 시험을 통해 입증하였다. 그리고 오동작 방지를 위한 설계 방안을 제시하였고, 시험 결과문제가 재발되지 않음을 확인하였다. 또한 출력증폭기 전원공급기 모듈 리셋회로 구동전원 저전압 현상을 확인하였고, 이에 대한 회로 보완 방안을 제시하고 검증 시험을 통해 정격전압 출력을 확인하였다. 본 연구에서 제시한 설계 방안을 적용 시 향후 출력증폭기 전원공급기 모듈 리셋회로에 의한 비상인터폰 제어전원 공급방식의 신규 철도차량 설계 시 동일한 오동작 문제를 사전에 예방할 수 있을 것으로 기대된다. This study performed the cause analysis about DC100[V] battery power source which is activated intermittently due to the contact activation of emergency control power source circuit by malfunction of a passenger emergency interphone in the case of rolling stock's power off. Also this study has uncovered that the problem is due to controlling elements of reset circuit in power supply module of power amplifier through the test result. The design methods to prevent the malfunction are presented, and it is verified that the same problem is not occurred by the test result. Moreover, the low voltage situation of operating power for reset circuit was found, and the improved design is suggested. Also it is verified that normal rated voltage output came out. In the future, if the design method as proposed in this paper is applied for Public Address & Passenger Information System in the new rolling stock project, it is expected that the same problem will not come up.
위상지연판 접합 편광필름의 광학적 고찰 및 결함 검출 방안
주영복,허경무 한국반도체디스플레이기술학회 2021 반도체디스플레이기술학회지 Vol.20 No.4
In this paper, we proposed and implemented defect detection methods of polarized film with half-wave phase retardation plates. We investigated the principles of phase retardation compensation and optical principle of half-wave phase retardation plates. We analyzed of samples of polarized film with half-wave phase retardation plates. The optical defect detection methods are proposed and the performance is validated with experiments.
웨이브렛 변환을 이용한 선형시스템 분석: 초음파 신호 해석의 응용
주영복,Joo, Young Bok 한국반도체디스플레이기술학회 2020 반도체디스플레이기술학회지 Vol.19 No.4
The Linear system analysis for physical system is very powerful tool for system diagnostic utilizing relationship between the input signal and output signal. This method utilized generally to investigate physical properties of system and the nondestructive test by ultrasonic signals. This method can be explained by linear system theory. In this paper the Continuous Wavelets Transform is utilized to search the relation between the linear system and continuous wavelets transform.
주영복,장태민,정경채,김규식 한국도시철도학회 2018 한국도시철도학회논문집 Vol.6 No.1
This study analyzed the cause about the halt phenomenon of Audio Video Controller in rolling stock which occured randomly at the low temperature in winter season. Also this study has uncovered that the problem is related to the detection method of SD card when Windows CE OS was installed in TCINF board of AVC equipment through the test. It has been presented that the appointed I/O pin only should be used in the SD host controller as detection method to check the insert status of SD card. The booting monitoring test, RS-485 connection test and Ethernet connection test were performed at the low temperature after OS was updated and it was verified that communication was normally operated. In the future, if the design method as proposed in this paper is applied for Audio Video Controller in the new rolling stock project, it is expected that the same problem will not come up and it will reduce the field failure and loss cost of cause analysis. 본 논문은 겨울철 저온에서 철도차량 AVC 장치가 간헐적으로 정지되는 현상에 대해 원인 분석을 실시하였다. 그리고 해당 문제가 AVC장치 내 TCINF 보드의 Windows CE OS 제작 시 SD card 감지 방법과 관련된 문제임을 시험을 통해 밝혀냈다. SD card의 삽입 여부를 확인하는 방법으로 SD host controller에 지정된 I/O핀만을 사용하는 방안을 제시하였다. OS 보완 후 저온에서 부팅 모니터링 시험, RS-485 및 Ethernet 연결 시험을 실시하였고, 통신이 정상 동작하는 것을 확인하였다. 본 연구를 통해 겨울철 저온에서 간헐적으로 발생할 수 있는 잠재적인 통신고장 문제를 사전에 예방함에 따라 향후 필드불량, 원인조사 손실비용 등을 줄일 수 있을 것으로 기대된다. 또한 향후 신규 철도차량 통합제어기 설계 시 동일 문제 발생을 예방할 수 있을 것으로 기대된다.