RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        규석광으로부터 직접 질화법에 의한 질화규소의 합성

        손용운,주성민,정헌생,Sohn Yong-Un,Joo Sung-Min,Chung Hun-Saeng 한국재료학회 2004 한국재료학회지 Vol.14 No.5

        $Si_3$$N_4$ ceramics have been identified as one of the promising structural ceramics. This study has been carried out to investigate of the synthetic behaviors of $Si_3$$N_4$ derived from domestic silica-stone by direct nitriding method. The silicon nitridation reaction has been studied in the temperature range of $1300~1550^{\circ}C$. Below the $1400^{\circ}C$, the nitriding rate was measured to be 16%. For the temperatures higher than the $1400^{\circ}C$, $\beta$-$Si_3$$N_4$ phase was formed mainly, and the nitriding rate showed above 98%. With the increasing of sample weight of silicon powder, the nitriding rate and $\beta$-$Si_3$$N_4$ phase increased at $1400^{\circ}C$ for 2 hours. The shape and particle size of$ Si_3$$N_4$ powder synthesized at $1400^{\circ}C$ for 2 hours showed the irregular angular-type and 10 $\mu\textrm{m}$, respectively.

      • KCI등재

        폐기물의 용융처리에 의한 시멘트원료의 합성

        황연,손용운,정헌생,이홍기,박현서,Hwang, Yeon,Sohn, Yong-Un,Chung, Hun-Saeng,Lee, Hong-Ki,Park, Hyun-Suh 한국자원리싸이클링학회 1996 資源 리싸이클링 Vol.5 No.1

        석회석슬럿지, 폐주물사, 석탄회 및 폐유리병 등의 산업폐기물을 용융처리하여 시멘트 클링커 상의 일부인 $C_2$S(2CaO.$SiO_2$)를 얻고, 폐기물 원료의 배합비율을 변화시킬 때 각 폐기물의 최종 생성물에 미치는 영향을 조사하였다. 일정한 염기도를 갖도록 혼합된 폐기물을 $1370^{\circ}C$에서 용융 처리한 결과 $\beta$-C$_2$S 및 $C_2$AS(2CaO.$Al_2$$O_3$.$SiO_2$)상으로 이루어진 용융물을 얻을 수 있었고, 2가지 상의 분율은 폐기물 원료의 조합방법에 따라 변하였다. 직교배열표를 이용하여 각 폐기물의 함량이 최종 용융물의 상에 미치는 영향을 조사한 결과, $\beta$-$C_2$S 상의 분율을 증가시키기 위해서는 석탄회의 함량을 감소시키고 폐유리병의 함량을 증가시켜야 함이 밝혀졌다. 분산분석을 행한 결과 석탄회의 함량조절이 최종 용융물의 상을 조절하는데 있어서 가장 중요한 인자임을 알 수 있었다. CZS(2Ca0 , SiO\ulcorner) phase of cement clinkcr was obtaincd by melting mixcd four indnstrial wasles of limestone sludge, waste Foundry sand, coal lly ash fiorn power plants and chernicas glasses. The effect ot mixing ratio of four rvastc mater~als ou the composnlg phascs in melled slag was investigated. Thc mixed wastes were meltcd to slag by heat under a constant basicity at 1370C. The shg consisted of p -CIS and C,AS(2CaO - A I P , . SiO,). The ratio of two phases was varied with mixing ~atioo f the waste materials. In order Lo increasc the amount ot j -C2S phase, the coal fly ash content should be reduced, while amount of the chemical glass be increased. The coal fly ash contcnt was the most imporlant factor in controlling phases of thc melted-slag.

      • KCI등재

        폴리올법에 의한 편상의 은 분말 합성

        김동진,양환진,안종관,이재령,정헌생,Kim Dong-Jin,Liang Huanzhen,Ahn Jong-Gwan,Lee Jae-Ryeong,Chung Hun-Saeng 한국분말야금학회 2004 한국분말재료학회지 (KPMI) Vol.11 No.6

        Monodispersed flaky silver powder was obtained by controlling the ratios of $H_{2}O_{2}/NH_{3}$ and Agin in a mixed solution of ethylene glycol and ammonia with an addition of PVP. The effects of $NH_{3}/Ag,\; H_{2}O_{2}/Ag\;and\;H_{2}PtCl_{6}/Ag$ on its morphology and size were investigated. In $H_{2}O_{2}-NH_{3}-AgNO_{3}\;system,\;NH_{3}/Ag$ molar ratio was found to be an important reaction factor for the nucleation and crystal growth of Ag powder. The synthesis of flaky powder was optimized at over 6 of $NH_{3}/Ag \;and\;5\;of\;H_{2}O_{2}/Ag\;under\;1.0{\times}10^{-3}\;of\;Pt/Ag.\;Moreover,\;as\;the\; NH_{3}/Ag$ molar ratio increased, the size of precipitates was increased regardless of the amount of Pt. In the absence of $H_{2}PtCI$, the morphology and size of reduced Ag powder were found to be irregular in shape $2-4{\mu}m$ in diameter. However, homogenized fine Ag powder was obtained due to heterogeneous nucleation when $H_{2}PtCI$ used as a cat-alyst, and flaky one was synthesized with the addition of Pt over $1.0{\times}10^{-3}$ of Pt/Ag.

      • KCI등재

        희석제 입도가 고온자전연소법에 의한 질화알루미늄 합성에 미치는 영향

        이재령,이익규,신희영,정헌생,Lee, Jae-Ryeong,Lee, Ik-Kyu,Shin, Hee-Young,Chung, Hun-Saeng 한국세라믹학회 2005 한국세라믹학회지 Vol.42 No.1

        고온자전연소법에 의한 질화알루미늄 합성에 있어서, 반응물(Al) 형상과 희석제(AlN) 입도 등의 형상학적 조건이 반응생성물에 미치는 영향을 조사하였다. 평균 입경(34$\mu$m)이 같은 두 종류의 Al 분말(입상, 편상)과 평균입경이 다른 4종류의 AM분말을 희석제로 사웅하여 반응 성형체를 준비하였다. 반응성형체의 충진밀도는 이론밀도의 $35\%로 고정하였고, 초기 질소압은 $1\~10MPa$, 희석을은 $0.4\~0.7$로 변화시키면서 반응을 실시하였다. 반응물과 희석제의 입도를 비슷하게 조절함으로써, 상대적으로 질소압이 낮은 1MPa의 조건에서도 순도 $98\% 이상, 입경 수십 $\mu$m의 AlN 합성이 가능함을 확인하였다. 이러한 고순도, 고입경화는 연소파 진행 후, 성형체 내부로 질소가스 투입 용이성의 차이에 의한 현상이라고 판단된다. To investigate the morphological effect on synthesis of aluminum nitride by SHS Process, two type of Al Powder (granular and flacky shape) with the mean size of 34 $\mu$m and the diluent AIN powders of four different mean sizes.0.12, 9.7, 39.3, 50.5 $\mu$m, were used to prepare green compact. The packing density was fixed to $35 TD\%. The initial pressure of $N_{2}$ and diluent fraction was varied in the range of $1\~10 MPa,\;0.4\~0.7$, respectively. AlN with high purity of $98\% or over and large particle size of about several tens fm can be synthesized by SHS reaction as a consequence of adjusting particle size of AlN dilutent similarly to that of Al reactant. This may be caused by improvement of $N_{2}$ gas permeation to compact after passing the propagation wave. In the case of flaky-shape aluminum used as reactant, instead of granular Al-powder, unstable combustion would be occurred. As the result, irregular propagation of combustion wave and falling-off of maximum temperature would be observed during the reaction.

      • KCI등재

        잠열저장재를 이용한 온돌판넬의 축열 및 방열특성에 관한 연구

        조수(Cho Soo),유제인(Yoo Jein),정헌생(Chung Hun-saeng) 한국태양에너지학회 1990 한국태양에너지학회 논문집 Vol.10 No.2

        본 연구는 염화칼슘6수화물(CaCI₂6H₂O)을 온돌판넬에 적용하여 가열시간에 따른 잠열재판넬의 축열 및 방열특성을 조사하기 위하여 같은 크기의 실험동(1.8m^L×1.8m^W×1.8m^H)을 지었다. 잠열재판넬에 적용할 알루미늄 용기는 1.6^T×9㎝^W×80㎝^H 크기로 제작하여 염화칼슘6수화물(1.25㎏)을 충진시켰다.<br/> 잠열재인 염화칼슘6수화물을 넣은 온돌판넬은 실내공기온의 변화폭을 줄이고, 잠열재의 상변화과정에서 방열되는 시간은 축열에 필요한 가열시간의 2~4배 정도였다. The present study was to investigate the use of a phase change material for hydronic radiant floor heating. Two identical unit test cells sized 1.8m^L×1.8m^W×1.8m^H were built and installed with specially designed 1.6^T×9㎝^W×80㎝^H aluminum Ondol-panels holding 1.25㎏ of calcium chloride hexahydrate(CCH) each.<br/> It was found that the Ondol-panel with CCH reduced the room temperature fluctuations and maintains the phase changing temperature for considerably long duration, 2~4 times of heating hour, over no-CCH one.

      • KCI등재

        이중 다류관 모델을 이용한 Darrieus 터어빈의 공기역학적 특성 해석

        김건훈(Keon-Hoon Kim),박경호(Kyung-Ho Park),정헌생(Hun-Saeng Chung) 한국태양에너지학회 1990 한국태양에너지학회 논문집 Vol.10 No.1

        수직축 다리우스 풍력 터어빈의 공기역학적 특성을 해석코자 날개요소이론과 운동량 이론에 근거하는 이중다류관모델을 정립하여 모델풍동실험과 병행하여 비교분석하였다. 이중 다류관 모델은 아직 수정 보완의 여지는 있으나 터어빈을 통과하는 유동의 변화가 심하지 않은 날개끝속도비나 회전면적비가 작은 경우에는 비교적 정확히 터어빈의 공기역학적 특성을 예측함을 알 수 있었고, 모형풍동실험을 통해 정확한 터어빈 회전수제어로서 각 특성변수들에 대한 영향을 살피었다 .<br/> 본 연구의 결과로서는 다리우스 터어빈의 설계 및 운전특성 예측에의 응용이 기대될 수 있다. The aerodynamic performances of Darrieus wind turbine were studied through the wind tunnel model tests and its analytical aerodynamic streamtube model. Hence, analytical streamtube model which is based on momentum and blade element theory is considered and the formulated model was generalized in non-dimensional type to predict the aerodynamic characteristics of Darrieus wind turbine. The analytical model was justified through the wind tunnel model tests for several experimental conditions but in the limited rages. These satisfactory comparative studies between the wind tunnel tests and the analytical predictions can be utilized for the basic reliable design of Darrieus wind turbine.

      • KCI등재

        국내의 풍력자원 특성 분석

        박경호(Park Kyung-Ho),김건훈(Kim Keon-Hoon),정헌생(Chung Hun-Saeng) 한국태양에너지학회 1990 한국태양에너지학회 논문집 Vol.10 No.2

        최근 전 세계적으로 풍력발전 기술의 급속한 발달로 인하여 풍력발전의 경제성이 과거보다 점차 향상되고 있으며, 이에국내에서의 풍력발전 가능성을 재확인하기 위한 사업의 일환으로 기상대에서 지난 10년간 관측한 풍속데이타를 Weibull 함수로 특성화하여 우리나라 전역의 풍황과 풍력자원 변화 및 분포 특성을 시간별, 월별, 계절별 및 년도별로 거시적으로 분석하였다. The recent technology of Wind Energy Conversion System(WECS) in the world is well-developed and the feasibility of WECS is better than the past time. So, it is necessary to re-analyze the characteristics of wind energy in this country.<br/> This paper deals with the analysis of wind energy distribution in Korean Peninsula, Cheju and Ullung island. The assessment was performed based on the raw data collected 64 meteorological stations for the last 10 years. The wind energy characteristics were analyzed hourly, monthly, seasonally and annually.<br/> The Weibull distribution was assumed and two parameters in all areas were calculated and the wind energy potential distribution in Korea was obtained.

      • KCI등재

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼