http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
정태석(Tae-Seok Jeong),강석정(Seok-Jung Kang),윤동환(Dong Hwan Yun),김현정(Huyn Jung Kim),이강식(Kang Sik Lee),김홍준(Hong Joon Kim) 대한임상노인의학회 2006 대한임상노인의학회지 Vol.7 No.4
Background: This study was performed to estimate the prevalence of vertebral fracture in the rural elderly community and to understand the clinical features of vertebral fracture. Methods: The subjects were 240 people age over 70 years old who had resided in the rural community. For each patient, an X-ray of thoraco-lumbar veretbrae and brief questionnaire were taken. Results: In this study, the total prevalence of vertebral fracture was 26.3%, and each prevalence of male and female was 22.9% and 39.6% (P<0.05). Among the patients, each frequency of traumatic and non-traumatic vertebral fracture was 25.4% and 74.6% (P<0.05). The most common fractured vertebrae were the 12th thoracic and the 1st lumbar vertebra. Only 9 (14.3%) patients with vertebral fractures had been diagnosed with osteoporosis. Of these, only 4 (6.3%) had received treatment for osteoporosis. Conclusion: These results showed that the female prevalence of the vertebral fracture was higher than that of male and the vertebral fracture without severe trauma was predominant. In addition, a spinal X-ray was simple and useful method for detection of non-traumatic vertebral fracture in the elderly. 연구배경: 본 연구는 농촌 지역의 70세 이상 노인에서 접근이 용이하고 비용이 저렴한 단순 방사선 검사를 통해 척추골절의 임상 양상 및 유병률 등을 파악하고자 하였다. 방법: 70세 이상의 노인 240명을 대상으로 외상의 과거력에 관한 간단한 병력 청취를 통해 심한 외상의 경험 유무를 파악하였고, 또한 허리통증의 유무 및 골다공증의 검사와 치료 경험 유무를 조사하였으며, 흉요추부 단순 방사선 검사를 시행하여 척추골절의 위치와 개수를 파악하였다. 결과: 본 연구 집단에서의 척추골절의 유병률은 26.3%이었고, 이 중 남자는 22.9%, 여자는 39.6%으로 여자에게서 척추골절의 유병률이 높았다(P<0.05). 척추골절 환자 중에서 심한 외상의 과거력이 없는 환자는 63명 중 47명(74.6%), 심한 외상의 과거력을 가진 환자는 63명 중 16명(25.4%)으로 심한 외상의 과거력이 없는 척추골절 환자의 빈도가 높았다(P<0.05). 척추골절 부위는 제12 흉추와 제1 요추에서 각각 23명씩으로 가장 많았고 척추 골절이 있는 63명 중 골다공증 검사를 받은 환자는 9명(14.3%)이었고, 골다공증 치료를 받는 환자는 4명(6.3%)에 불과하였다. 결론: 70세 이상 농촌 지역 노인에게 있어서 척추골절의 유병률은 여자가 남자보다 높았으며, 외상의 과거력이 없는 흉요추부 척추골절의 빈도가 높았다. 노인에서 골밀도 감소로 외상이 없거나 혹은 경미한 외상에 의해 발생하는 척추골절의 진단을 위해 노인의 건강검진 및 일차 진료에서 비용과 시간을 절약할 수 있는 흉요추 부위의 단순 방사선 검사가 시행되어야할 것으로 생각하며, 이를 통해 적극적인 골다공증 치료를 시행함으로써 노인들의 추가적인 척추골절 발생률을 낮추고 삶의 질을 향상시킬 수 있을 것으로 생각한다.
CNN 기반 오디오 분류를 이용한 유도 전동기의 고장 진단
정태석(Taesuk Joung),심재훈(Jaehoon Shim),하정익(Jung-Ik Ha) 전력전자학회 2021 전력전자학술대회 논문집 Vol.2021 No.11
기계시스템과 연결된 유도 전동기 구동 시 베어링 손상으로 인한 고장과 축의 오정렬에 의한 고장이 발생할 수 있다. 고장 상황 시 소리 신호의 패턴의 차이가 나타나게 된다. 본 연구에서는 이 소리 신호들을 멜 스펙트로그램으로 변환 후, CNN(Convolutional Neural Network)을 활용해 고차원 특징을 추출하는 모델 구조를 제안한다. 또한, 추출된 특징을 기반으로 FNN(Feedforward Neural Network) 분류기를 활용하여 고장 진단을 하는 모델을 제안한다. 특징 추출 모델과 분류기 모델은 종단간 학습되며, 모델의 성능으로 668개 평가 데이터에 대해 99.85%의 진단 정확도를 얻었다.
윤중락,정태석,최근묵,이석원,Yoon, Jung-Rag,Jeong, Tae-Seok,Choi, Keun-Mook,Lee, Seok-Weon 한국전기전자재료학회 2007 전기전자재료학회논문지 Vol.20 No.6
In order to enhance sintering characteristics on the $ZnO-Pr_6O_{11}$ based multilayer chip varistors (MLVs), a response surface analysis using central composite design method were carried out. As a result, varistor voltage($V_{1mA}$), nonlinear coefficient ($\alpha$), leakage current ($I_L$) and capacitance (C) were considered to be mainly affected by sintered temperature and holding time. MLVs sintered at $1200^{\circ}C$ and above $1200^{\circ}C$ revealed poor electrical characteristics, possibly due to the reaction between electrode materials(Pd) and $ZnO-Pr_6O_{11}$ based ceramics. On the sintering temperature range $1150{\sim}1175^{\circ}C$, nonlinear coefficient ($\alpha$) and leakage current ($I_L$) were shown to be $60{\sim}69$ and below $0.3{\mu}A$, respectively. In particular, MLVs sintered at $1175^{\circ}C$, 1.5 hr and $2^{\circ}C/hr$ (cooling speed) showed stable ESD(Electrical Static Discharge) characteristics under the condition of 10 times at 8 Kv with deviation varistor voltage, and deviation nonlinear coefficient were 0.3% and 0.33% (at positive), 0.55% (at negative), respectively.
소결 조건에 따른 ZnO 바리스터의 미세구조 및 전기적 특성
윤중락,정태석,이헌용,이석원,Yoon, Jung-Rag,Chung, Tae-Serk,Lee, Heun-Young,Lee, Serk-Won 한국전기전자재료학회 2006 전기전자재료학회논문지 Vol.19 No.7
Microstructure and electrical properties of ZnO varistors as a function of sintering temperature and times were investigated. Sintering temperature and times greatly affected electrical properties and Bi-rich liquid phase of the microstructure. The varistor which were sintered at $1125^{\circ}C\sim1150^{\circ}C$, for 2 hr exhibited the varistor voltage$(V_c)$, nonlinear coefficient $(V_{10mA}/V_{1mA})$, leakage current$(I_L)$ dielectric constant and dissipation factor as $225\sim250V/mm,\;0.89\sim0.92,\;0.8\sim1.1{\mu}A,\;720\sim740\;and\;1.8\sim2.0%$, respectively.
C0G 온도계수 특성을 가지는 고압용 적층 칩 캐패시티의 유전 및 내전압 특성
윤중락,우병철,정태석,Yoon, Jung-Rag,Woo, Byong-Chul,Chung, Tae-Serk 한국전기전자재료학회 2008 전기전자재료학회논문지 Vol.21 No.2
High voltage MLCCs with C0G temperature coefficient characteristics could apply DC-DC invertor were investigated for its dielectric properties. Also we manufactured MLCC through various process and studied the characteristics of dielectric break down voltage [BDV] and dielectric property as the variation of thickness in the green sheet and how to pattern the internal electrode. As the thickness of green sheet is increase, the dielectric BDV per unit thickness is decreased. But as the pattern of internal electrodes were floated we could manufacture the high voltage MLCC maintained its dielectric BDV a unit.
고압용 X7R 적층 칩 캐패시터의 Er<sub>2</sub>O<sub>3</sub> 및 유리프릿 첨가에 따른 전기적 특성
윤중락,김민기,정태석,우병철,이석원,Yoon, Jung-Rag,Kim, Min-Kee,Chung, Tae-Seog,Woo, Byoung-Chul,Lee, Seog-Won 한국전기전자재료학회 2008 전기전자재료학회논문지 Vol.21 No.5
To manufacture the MLCC with X7R for high voltage stability, $BaTiO_3-MgO-MnO_2-Y_2O_3$ with $(Ba_{0.4}Ca_{0.6})SiO_3$ glass frit was formulated. Based on this composition, the addition of $Er_2O_3$ showed that TCC(Temperature Coefficient Capacitance) at $85^{\circ}C$ was improved from 5 % to ${\sim}0\;%$, but the dielectric constant and IR (Insulation Resistance) were decreased. The glass frit improved the dielectric constant and IR, so the appropriate contents of $Er_2O_3$ and glass frit were 0.6 mol% and 1 wt%, respectively. It showed that the dielectric constant and RC constant were 2,550 and 2,000 (${\Omega}F$), respectively in the sintering condition at $1250^{\circ}C$ in PO2 $10^{-7}$ Mpa. The MLCC with $3.2{\times}1.6$ (mm) size and $1\;{\mu}F$ was also suited for X7R with the above composition.
IPMSM의 회전자 형상을 고려한 가진력에 의한 변위 특성(3)
박경원(Kyoung-Won Park),정태석(Tae-Suk Jung),조규원(Gyu-Won Cho),김규탁(Gyu-Tak Kim) 대한전기학회 2012 대한전기학회 학술대회 논문집 Vol.2012 No.11
본 논문에서는 코깅 토크 저감을 통한 구동 토크의 리플을 저감시키기 위하여 회전자에 노치와 배리어를 설치하였다. 실험 계획법을 이용하여 최적화 설계를 진행하였으며 토크를 비롯한 전동기 제반 특성을 유한요소해석을 통하여 고찰하였다. 또한 고정자의 모달 해석을 수행하여 고유 진동수를 산정하고 가진력에 의한 변위 해석을 수행하여 회전자 형상이 변위 특성에 미치는 영향을 고찰하였다.