http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
나사 切削 바이트에 對한 小考 : Mainly on the Front Top Rake
鄭泰圭 大田工業高等專門學校 1969 論文集 Vol.4 No.-
In our country, screw cutting machines are not developed nor commonly used. Still the screw cutting operations are dependent on the lathe in most of factories, by the way, when screw cutting is made by the lathe, we can not help having the second operation because we come to have some unsatisfied result with the first operation only. Therefore, this research deals with the screw thread cutting bit with front top rake angle which is highly accurate and able to increase the ability of work.
鄭泰奎 大田工業專門學校 1976 論文集 Vol.19 No.-
고급 주철주물 재질향상에 관한 조사연구를 한결과 다음과 같은 결과를 얻었다. (1) 장입재료의 선별과 용해 작업관리의 개선으로 용탕의 온도를 높일 수 있었다. (2) Slag와 로정가스를 분석으로 로내반응은 변동성이 민감함을 알 수 있으며 정상임을 확인 할 수 있었다. (3) 전 cokes 사용과 steel scrap의 중량으로 탄소함유량을 저하시킬 수 있었고 matrix는 Ferrite에서 pearlite화가 가능함을 알 수 있었다. (4) 접종처리 및 냉각속도에 의한 흑연 형태에 미세화를 가져왔으며 높은 인장 강도를 얻을수 있었다. (5) 재질의 균일화를 위하여 전로설치의 중요성이 검토되었으며 Cupola폐열을 이용한 연료 및 석회석의 건조사용이 검토 조사되었다.
鄭泰奎 大田工業高等專門學校 1970 論文集 Vol.6 No.-
Recently, the problem of the anti-noise in the internal combustion engine is thought much of and studied in various ways. In order to study the ant-noise in the internal combustion engine, first of all, it is necessary for us to consider Counter-measure against it after we have a full acguaintance of the noise we should alter the ways and degree in the muffler, accordi ng to the establishing place, its usage and surroundings of the engine. The muffler is generally used to suck and exhaust the noise in tile internal combustion engine. There are a lot of studies on the muffler, but they are only the plans of the theory and experiments. In studying the muffler, it is necessary to describe the characteristics of the suction and exhausting noise which is the original sound, but I gave a brief description about it, and mainly studied on the elementary theory and practice of the muffler in this paper.
액체로켓엔진 동특성 파악을 위한 압력 펄스발생기의 수치 해석적 연구
정태규,이수용 한국항공우주학회 2012 한국항공우주학회 학술발표회 논문집 Vol.2012 No.11
본 논문에서는 액체로켓엔진과 공급계의 전달함수를 실험적으로 구하기 위해 사용되는 압력 펄스 발생기를 소개하였다. 캠 방식의 압력 펄스발생기에 대한 주파수 영역에서의 수학적 모델을 제시하였다. 수학적 모델을 이용한 해석 결과와 상용 해석코드를 이용한 시간 영역 해석 결과가 잘 일치함을 보임으로써 주파수 영역 수학적 모델의 타당성을 검증하였다. 또한 압력 펄스발생기 시스템 해석을 수행하였으며, 이를 통해 펄스발생기 입구의 오리피스 직경 변경이 압력 펄스의 진폭을 제어할 수 있음을 보였다. In this paper, a pressure pulsator, which is used for the experimental acquirement of the transfer function of a liquid rocket engine and feed system, has been introduced. The mathematical model of a cam-type pressure pulsator in the frequency domain is proposed. The numerical simulation results using the mathematical model show good agreement with the simulation results using a commercial code in the time domain. Also, the simulation of the pulsator system shows that the change of orifice diameter in front of the pulsator can control the pressure amplitude effectively.