http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
정인균,박종윤,김성준,장철희,Jung, In Kyun,Park, Jong Yoon,Kim, Seong Joon,Jang, Cheol Hee 한국농공학회 2014 한국농공학회논문집 Vol.56 No.6
This study was to develop the flood analysis module (FAM) for implementation of a web-based real-time agricultural flood management system. The FAM was developed to apply for an individual watershed, including agricultural reservoir. This module calculates the flood inflow hydrograph to the reservoir using effective rainfall by NRCS-CN method and unit hydrograph calculated by Clark, SCS, and Nakayasu synthetic unit hydrograph methods, and then perform the reservoir routing by modified Puls method. It was programmed to consider the automatic reservoir operation method (AutoROM) based on flood control water level of reservoir. For a $15.7km^2$ Gyeryong watershed including $472{\times}10^4m^3$ agricultural reservoir, rainfall loss, rainfall excess, peak inflow, total inflow, maximum discharge, and maximum water level for each duration time were compared between the FAM and HEC-HMS (applied SCS and Clark unit hydrograph methods). The FAM results showed entirely consistent for all components with simulated results by HEC-HMS. It means that the applied methods to the FAM were implemented properly.
Landsat TM 영상을 이용한 논지역 내 비닐하우스 면적 추정
정인균,박근애,장철희,김성준,Jung In-Kyun,Park Geun-Ae,Jang Cheol-Hee,Kim Seong-Joon 한국관개배수위원회 2001 한국관개배수논문집 Vol.8 No.2
A plenty of wastes by greenhouse cultivation affect soil and water pollution much more than those by rice cultivation in paddy field. The greenhouse on paddy field has been increased dramatically, however their physical information such as the location an
분포형 강우-유출모형의 하도자료 구축을 위한 하폭 및 하상경사 산정공식 개발
정인균,박종윤,조형경,이지완,김성준,Jung, In-Kyun,Park, Jong-Yoon,Joh, Hyung-Kyung,Lee, Ji-Wan,Kim, Seong-Joon 한국농공학회 2010 한국농공학회논문집 Vol.52 No.4
In this study, two estimation equations for preparing stream data for distributed storm runoff model were developed by analyzing the nonlinear relation between upstream flow-length and stream width, and between upstream flow-length and stream bed-slope. The equations for stream cell were tested in Chungjudam watershed (6,661 $km^2$) using KIMSTORM. Six storm events occurring between 2003 and 2008 were selected for the model calibration and verification before the test of equations. The average values of the Nash-Sutcliffe model efficiency (ME), the volume conservation index (VCI), the relative error of peak runoff rate (EQp), and the difference of time to peak runoff (DTp) were 0.929, 1.035, 0.037, and -0.406 hr for the calibrated four storm events and 0.956, 0.939, 0.055, and 0.729 hr for the two verified storm events respectively. The estimation equations were tested to the storm events, and compared the flood hydrograph. The test result showed that the estimation equation of stream width reduced the peak runoff and delaying the time to peak runoff, and the estimation equation of stream bed-slope showed the opposite results.
격자기반 운동파 강우유출모형 KIMSTORM의 개선(II) - 적용 및 분석 -
정인균,신형진,박진혁,김성준,Jung, In Kyun,Shin, Hyung Jin,Park, Jin Hyeog,Kim, Seong Joon 대한토목학회 2008 대한토목학회논문집 B Vol.28 No.6B
본 연구에서는 격자기반 운동파 강우유출모형 KIMSTORM을 개선한 ModKIMSTORM을 유역면적 $2,293km^2$의 남강댐 유역을 대상으로 적용성을 검토하였다. 공간해상도 500 m의 GIS 입력자료(DEM, 토지피복도, 유효토심도, 토양종류도 등)를 구축하였으며, 5개 태풍(2000년 사오마이, 2002년 루사, 2003년 매미, 2004년 메기, 2006년 에위니아) 및 2개 강우사상 (2003년 5월, 2004년 7월)을 적용하여 모형을 검보정하였다. 모형의 자동평가 기능을 이용하여 모의유량을 실측유량과 비교하였으며, 유역의 출구지점에 대한 매개변수 보정결과 결정계수($R^2$), 모형효율(E), 유출용적편차($D_v$), 첨두유량의 상대오차 ($EQ_p$), 첨두시간의 절대오차($ET_p$)의 평균은 각각 0.984, 0.981, 3.63%, 0.003, 0.48 hr로, 검정에서는 $R^2$, E, $D_v$, $EQ_p$, $ET_p$의 평균이 각각 0.937, 0.895, 8.08%, 0.138, 0.73 hr로 분석되었다. 매개변수와 관련하여 초기토양수분함량이 유출용적에 민감하였고, 하천조도계수가 첨두유량에 가장 민감한 변수로 나타났다. 호우기간동안의 공간적인 결과로부터 수문학적 요소의 작용을 살펴봄으로써 호우시 유역관리에 대한 정보를 얻을 수 있었다. This paper is to test the applicability of ModKIMSTORM (Modified KIneMatic Wave STOrm Runoff Model) by applying it to Namgangdam watershed of $2,293km^2$. Model inputs (DEM, land use, soil related information) were prepared in 500 m spatial resolution. Using five typhoon events (Saomi in 2000, Rusa in 2002, Maemi in 2003, Megi in 2004 and Ewiniar in 2006) and two storm events (May of 2003 and July of 2004), the model was calibrated and verified by comparing the simulated streamflow with the observed one at the outlet of the watershed. The Pearson's coefficient of determination $R^2$, Nash and Sutcliffe model efficiency E, the deviation of runoff volumes $D_v$, relative error of the peak runoff rate $EQ_p$, and absolute error of the time to peak runoff $ET_p$ showed the average value of 0.984, 0.981, 3.63%, 0.003, and 0.48 hr for 4 storms calibration and 0.937, 0.895, 8.08%, 0.138, and 0.73 hr for 3 storms verification respectively. Among the model parameters, the stream Manning's roughness coefficient was the most sensitive for peak runoff and the initial soil moisture content was highly sensitive for runoff volume fitting. We could look into the behavior of hyrologic components from the spatial results during the storm periods and get some clue for the watershed management by storms.
급속소결공정에 의한 WC-8wt.%Co 초경재료 제조와 기계적 성질평가
정인균,김환철,손인진,도정만 한국분말야금학회 2006 한국분말야금학회 학술대회논문집 Vol.2006 No.1
새로운 급속소결방법인 고주파유도가열 소결법과 펄스전류활성 소결법을 이용하여 습식 볼밀링으로 혼합한 WC-8wt.%Co분말에 60MPa의 압력과 90%의 고주파출력 또는 2800A의 필스전류를 가하여 상대밀도가 98.6% 이상인 초경재료를 2분이내의 짧은 시간에 제조하였다. 초기의 WC분말의 입도가 미세해짐에 따라 고주파유도가열 소결법과 펄스전류활성 소결법 모두 소결시간이 단축되는 경향을 보였으며 그 소결체의 결정립 크기도 감소하였다. 고주파유도가열 소결
정인균,신안국,정광욱 한국농공학회 2019 한국농공학회 학술대회초록집 Vol.2019 No.-
본 연구에서는 수도작 중심의 관개지구 수리시설물을 대상으로 논, 밭 용수를 함께 이용하기 위한 수리시설물 개보수 방안 검토와 관련하여 기설 개수로의 수리적 특성을 적정하게 모의할 수 있는 방안을 검토하는데 있다. 수로의 수리 해석을 위한 모델로 HEC-RAS, EPA-SWMM 등이 대표적이며, 본 연구에서는 수리수문해석이 동시에 가능한 EPA-SWMM을 선정하였다. EPA-SWMM은 도시지역의 우수유출을 모의하여 우수유출을 관리하는 목적으로 주로 이용되고 있으나 수문해석, 개수로, 관수로, 펌프, 오리피스, 위어, 제어명령의 요소를 반영한 수로네트워크 분석이 가능하므로 농업수리시설의 수리해석에 적용이 가능하다. 농업수리시설에 적용을 위한 요소별 분석기법을 검토하였으며, 충남 부여군 세도면에 위치한 가회청포지구(161.7ha)를 대상으로 모델을 적용하여 개발당시(수도작 중심)와 현재의 경작상태(시설재배 혼재)로 인한 용수공급을 모의하여 비교하였다.
정인균,이미선,김성준 한국농업정보과학회 2003 농업정보과학 Vol.4 No.1
DEM (Digital Elevation Model) is now widely used as a base data in various field related to topological characteristics. It is usually generated from digital terrain map or satellite images. In this study, an automatic process to generate DEMs from 1:5,000 scale NGIS digital map is presented using AML (ARC/INFO Macro Language), and the elapsed time to create TIS by increasing the number of coverage was compared. As a result, the efficiency of DEM generation was raised and the relationship between elapsed time and the number of coverage could be represented as a regression equation that can estimate time of DEM generation using digital map data.
고주파 유도가열 소결장치와 펄스전류활성 소결장치에 의해 제조된 WC-8wt.%Ni 초경재료의 소결 거동과 기계적 특성
정인균,김환철,손인진,도정만 한국분말야금학회 2006 한국분말야금학회 학술대회논문집 Vol.2006 No.1
급속소결방법인 고주파유도가열 소결법과 펄스전류활성 소결법을 이용하여 습식 볼밀링으로 혼합한 WC-8wt.%Ni분말에 60MPa의 압력과 고주파유도가열장치의 경우 전체 용량 (15kw)의 90%에 해당하는 고주파출력을, 펄스전류활성 소결장치의 경우 2800A의 펄스전류를 가하여 치밀한 소결체를 2분이내의 짧은 시간에 제조하였다. WC 초기입자크기가 증가함에 따라 제조된 소결체의 입자크기와 평균자유행로는 증가하였다. 또한 WC 결정립 크기가 증가함에 따라