http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
서울 도심부 3대 광장 주변부 공간실태 분석 및 개선 방안에 관한 연구
이정형(Lee, Jung-Hyung),이용훈(Lee, Yong-Hun),정영도(Jeong, Young-Do) 한국도시설계학회 2013 도시설계 : 한국도시설계학회지 Vol.14 No.6
2004년에 서울광장이 조성된 이후 청계광장, 광화문광장은 도심공간에 공공을 위한 대표적 공공광장으로 이용되고 있다. 그러나 이들 도시광장은 도시공간 골격이 형성된 이후 광장공간으로 전용된 공공공간으로, 개별?산발적으로 조성되어 주변부의 도시건축, 공공공간 등과 체계적으로 연계되지 못하고 있다. 이로 인해 광장 그 자체는 개방적 공간이라 할 수 있지만 주변공간들에 의해 단절되거나 주변과의 공간적 맥락이 단절되어 도시광장으로서 기능에 한계를 가지고 있다. 본 연구에서는 도시공간 맥락적 시점에서 ‘공공공간인 광장이 어떻게 주변 도시건축의 질과 도시공간적 연계가치를 보장할 수 있느냐’에 대해 분석하고자 한다. 이를 위해 ‘광장가로 블록’이라는 새로운 관점에서 광장을 중심으로 공간활성화를 위한 계획적 접근방법을 제시하고자 하는 것이 궁극적인 목적이다. 연구방법으로는 문헌 및 현황조사를 통하여 대상지를 선정한 후 도시광장적/가로블록적/가로공간적 관점에서 광장과 주변부의 공간 현황 및 특성을 분석하고, 광장 주변 블록 세부 단면의 유형화를 통해 광장과 주변부 공간이 갖고 있는 관계성의 특징을 살펴보았다. 연구결과, ‘광장가로블록’이라는 단위공간조직을 위계에 따른 3가지 관점에서 살펴보고 분석결과를 바탕으로 관계성에 대한 유형화 도출, 유형별 특성 및 개선방안을 제언하였다. 그러나 기존의 관점으로는 광장과 도시공간의 문제점 도출 및 해결에 있어 한계를 가지고 있고, 이를 위해 ‘광장가로블록’이라는 새로운 관점을 제시하면서 공간구조의 분석과 특징을 정리하였다. Square of city is regarded more important than ever before. But the squares are isolated from periphery when they were developed on an individual basis without understanding surroundings. The purpose of this study is to examine the relationship between squares, which are disconnected with urban spatial structure, and the periphery by conducting site analysis focusing on squares. On the basis of analyzing the characteristics and problems of six derived typical pattern, the relationship of square and the spatial of periphery was examined. From the findings of the study the concept of “Block-street Square” concept was suggested.
메소스케일 유한요소해석을 이용한 콘크리트 휨압축강도의 크기효과에 대한 연구
이성태 ( Yi Seong Tae ),임진선 ( Lim Jin Sun ),정영도 ( Jeong Yong Do ) 한국구조물진단유지관리공학회 2017 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.21 No.2
This study is an analytical research on the size effect of concrete flexural-compressive strength. The meso-scale finite element method was used to analyze various sizes of specimens. As a result of the analysis, the size effect that the flexural-compressive strength becomes smaller as the size of specimen becomes bigger is analytically confirmed.
컴퓨터시뮬레이션과 실용량 하드웨어시뮬레이터를 이용한 계통연계 풍력발전의 성능비교분석
윤동진(Dong-Jin Yun),오승진(Seung-Jin Oh),한병문(Byung-Moon Han),정병창(Byoung-Chang Jeong),정용호(Yong-Ho Jung),최영도(Young-Do Choy),전영수(Young-Soo Jeon) 대한전기학회 2009 전기학회논문지 P Vol.58 No.3
This paper describes comparative analysis results about the dynamic interaction of interconnected wind power system using the actual-size hardware simulator and the simulation model with PSCAD/EMTDC. The hardware simulator, which is composed of 2.0MVA induction motor with drive system and 1.5MW doubly-fed induction generator, was built and tested in Go-Chang Test Site of KEPCO for analyzing the dynamic interaction with the interconnected distribution system. The operation of hardware simulator was verified through comparative analysis between experimental results and simulation results obtained by simulation model with PSCAD/EMTDC. The developed hardware simulator and simulation model could be effectively used for analyzing the dynamic interaction, which has various phenomena depending on the wind variation and the network state of interconnected power system.
PSCAD/EMTDC를 이용한 고창 시험 설비 단지 1.5MVA 풍력 시스템 모델 개발
윤동진(Dong-Jin Yun),한병문(Byung-Moon Han),최영도(Young-Do Choy),전영수(Young-Soo Jeon),정병창(Byoung-Chang Jeong),정용호(Yong-Ho Chung) 대한전기학회 2008 대한전기학회 학술대회 논문집 Vol.2008 No.11
This study proposes a model of 1.5MVA wind power system in Go-chang field demonstration and performs simulation according to variable wind speed. 1.5MVA wind power system was verified by computer simulations with PSCAD/EMTDC software. Terminal voltage, grid voltage and active/reactive power can be observed through the simulation results.
컴퓨터 시뮬레이션과 실규모 하드웨어시뮬레이터를 이용한 계통연계 풍력발전의 응동특성 분석
윤동진(Dong-Jin Yun),한병문(Byung-Moon Han),최영도(Young-Do Choy),전영수(Young-Soo Jeon),정병창(Byoung-Chang Jeong),정용호(Yong-Ho Chung) 대한전기학회 2009 대한전기학회 학술대회 논문집 Vol.2009 No.7
This paper describes comparative analysis results about the dynamic interaction of interconnected wind power system using the actual-size hardware simulator and the simulation model with PSCAD/EMTDC. The hardware simulator, which is composed of 2.0㎹A induction motor with drive system and 1.5㎿ doubly-fed induction generator, was built and tested in Go-Chang Test Site of KEPCO for analyzing the dynamic interaction with the interconnected distribution system. The operation of hardware simulator was verified through comparative analysis between experimental results and simulation results obtained by simulation model with PSCAD/EMTDC. The developed hardware simulator and simulation model could be effectively used for analyzing the dynamic interaction, which has various phenomena depending on the wind variation and the network state of interconnected power system.