http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
정명균,오재민,팽기석,송재욱,Jeong, Myeong-Gyun,O, Jae-Min,Paeng, Gi-Seok,Song, Jae-Uk 대한기계학회 2002 大韓機械學會論文集B Vol.26 No.3
In order to design and analyze the performance of an axial-flow pump it is necessary to know the flow deviation, deflection angle and pressure loss coefficient as a function of the angle of incidence for the hydrofoil section in use. Because such functions are unique to the particular section, however, general correlation formulae are not available for the multitude of hydrofoil profiles, and such functions must be generated by either experiment or numerical simulation for the given or selected hydrofoil section. The purpose of present study is to generate design correlations for hydrofoils with double circular arc (DCA) camber by numerical analysis using a commercial code, FLUENT. The cascade configuration is determined by a combination of the inlet blade angle, blade thickness, camber angle, and cascade solidity, and a total of 90 cascade configurations are analyzed in this study. The inlet Reynolds number based on the chord and the inlet absolute velocity is fixed at 5${\times}$10$\^$5/. Design correlations are formulated, based on the data at the incidence angle of minimum total pressure loss. The correlations obtained in this way show good agreement with the experiment data collected at NASA with DCA hydrofoils.
정명균,김경천 대한기계학회 1982 大韓機械學會誌 Vol.22 No.4
제품의 고급화, 정밀화, 생산성의 행상, 그리고 원가절감이 요구되는 요즈음 컴퓨터를 이용한 온라인 계측, 데이타처리 그리고 제어가 기계공학에서 차지하는 중요성이 점점 더 크게 인식되고 있다. 더욱 동력비와 연료비가 계속 상승하고 있기 때문에 건물에너지시스템, 화학공정시스템과 기타 에너지사용시스템의 온라인 모니터링(on-line moritiring)과 최적제어(에너지 사용비절감)을 위한)가 어느 때 보다도 중요성이 고조되고 있다. 본 해설을 통해서 마이크로프로세서 응용의 중요성과 일반적 방법을 잠시 생각해 보고자 한다.
정명균,이정운 대한기계학회 1981 대한기계학회논문집 Vol.5 No.4
An inexpensive and very simple microcomputer-aided measurement system has been designed for on-line experiments, which perform simultaneously data acquisition, data recorditing, calculations with the data, and positioning of necessary sensors. Interfacting between the microcomputer and the data acquisition board which consists of A/D converter, analog multiplexer, and sample-and-holder, etc. has been done through IEEE-488 interface port and parallel user port both provided by the PET computer"s main logic board. Data and control signals are transfered between devices without handshaking. By utilizing BASIC commands PEEK, POKE, SYS, USR which are offered by PET microcomputer, it is possible to link machine code subroutines into the main BASIC program. This facilitates ease of data transfer, programming, and speedy execution of the program. In addition, an X-Y scanning table has been concected to the system in order to automatically position measuring sensors along a pre-determined path of interest.
정명균 대한기계학회 1994 大韓機械學會誌 Vol.34 No.9
유체유동이나 열전달 그리고 물질전달 (물질의 혼합 및 확산) 또는 이들 현상이 복합적으로 나 타나는 각종 기계의 설계와 성능 해석을 하기 위해서는 그 현상을 지배하는 편미분 방정식들의 해를 수치적으로 구해야 한다. 유동 상태가 충류 유동인 경우는 지배 방정식의 수가 알고자 하는 미지변수 즉 속도, 압력, 온도, 농도 등의 개수와 같고 또한 이들 변수들의 변동이 그리 심하지 않기 때문에 적절한 수치 해법을 사용하면 그 해를 구할 수 있다. 그러나 난류유동의 경우에는 변수들이 시간상으로 또한 공간적으로 대단히 심하게 변동(fluctuation)하기 때문에 공 학적으로 우리가 원하는 정보들, 즉, 표면 마찰저항이나 양력, 얼전달 계수, 물질 확산계수 등을 현재 수준의 전자계산기로 계산하는 데는 계산시간이 엄청나게 소요될 뿐만 아니라 변수 저장 메모리도 과도하게 차지하기 때문에 실제적인 계산 방법이 되지 못하고 있다. 이러한 이유로 변수들의 순간 변화 상태를 나타내는 지배 방정식들을 해석하는 대신에 이들 지배 방정식의 시 간평균을 취하여 유도한 난류 방정식들을 사용하게 된다. 그러나 이 시간 평균 과정에서 파생 되는 또 다른 미지의 난류 변수들 때문에 난류 지배 방정식에 있어서는 그 지배 방정식의 개수 보다 미지 변수의 개수가 많아져서 난류 지배 방정식을 풀기 위해서는 시간평균 과정에서 나타난 난류 변수들을 원래 있던 미지 변수들의 함수나 방정식의 형태로 가정할 필요가 있게 되는데 이 가정되는 함수 관계들을 난류 계산 모형이라고 한다. 난류 계산 모형은 물리적인 통찰과 직관에 의해서 실용적인 형태로 가정되기도 하지만 최근에는 논리적으로 엄격한 모형 원칙에 따른 수 학적인 방법으로 유도되고 있는데 이 글에서는 일반 독자들이 쉽게 이해할 수 있도록 마하수가 낮은 2차원 비압축성 난류 유동을 예로 들어 x-y 직교 좌표계에서 표현되는 난류 계산 모형들을 소개하고 앞으로듸 발전 방향을 개관하며 현재의 응용 사례들을 예로 들어 모형의 성능을 비교 하여 보기로 한다.