http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
유리비골피부피판을 이용한 두경부 재건 시 CT Angiography를 통한 천공지의 확인
장택진,김은기,최종우,Chang, Tack-Jin,Kim, Eun Key,Choi, Jong Woo 대한두개안면성형외과학회 2012 Archives of Craniofacial Surgery Vol.13 No.1
Purpose: Fibular osteocutaneous free flap is the procedure of choice for mandibular reconstruction. However, the anatomic consistency and the reliability of the skin paddle have been considered to be questionable and the utilization of the fibular osteocutaneous free flap can be challenging for the inexperienced surgeon. Preoperative computed tomography (CT) angiography can support revolutionary help with the operator design of the fibular osteocutaneous flap. The purpose of this article is to share the valuable experience of support with preoperative CT angiography. Methods: Three consecutive patients, who needed mandibular reconstruction, were treated with fibular osteocutaneous free flap. Each of the patients had undergone lower extremity CT angiography before the surgery. The CT angiographies were scrupulously investigated to calculate the locations and the tracts of the peroneal artery perforators. We compared the findings of the CT angiography with those of the real operation. Results: The information about the perforators was sufficiently matched with the findings of the operation. With the use of preoperative CT angiography, we were able to achieve confident performance during operation, shortening of operation time, and fine outcomes with a no flap failure. Conclusion: The CT angiography of lower extremity can provide reliable information of the perforators of the fibular osteocutaneous free flap.
최적화 방법을 이용한 Johnson-Cook 모델 계수 결정
장택진,유요한,김종봉 대한기계학회 2019 大韓機械學會論文集A Vol.43 No.12
Thus far, the majority of Johnson-Cook (JC) model parameters have been determined by fitting of the experimental data. To achieve this, some values in each test, such as the strain rate and temperature, are assumed to be fixed. After numerous tests with various strain rates and temperatures, the flow stress is fitted as a function of the strain, strain rate, and temperature. However, the fixed test conditions may vary during the test. For example, the strain rate is not constant during a test if the test velocity is constant. In this paper, an optimization method is proposed to determine the model parameters. Tensile tests are performed for various strain rates. A finite element analysis is also conducted for the same conditions, and the model coefficients of the JC model are used as the design parameters. The error is defined as the discrepancy between the experimentally and numerically obtained stress-strain relations. This error is then used as a minimization objective. By this method, the model coefficients can be determined such that the numerically obtained stress-strain relation almost coincides with the experimentally obtained stress-strain relation. Moreover, a determination method of the material model coefficients by optimization is proposed. Johnson-Cook(JC) 모델은 일반적인 재료구성모델 중 하나로써 고 변형률, 고 변형률 속도, 고온의 조건에서 금속재료의 거동을 비교적 잘 표현할 수 있다. 지금까지는 대부분 여러 속도와 온도에서 측정한 응력-변형률 선도를 커브 핏팅하여 고속 물성 계수를 결정하였다. 이 경우 각각의 시험에서 변형률 속도는 일정하다고 가정한다. 하지만, 시험 중 변형률 속도는 변하기 때문에 일정하다고 가정하면 오차를 유발할 수 있다. 본 연구에서는, 모델 계수(JC 모델의 경우 A, B, C, n)를 설계변수로 하고, 시험으로 얻은 응력-변형률 선도와 설계변수를 이용하여 유한요소해석(시험과 같은 조건)을 이용해 얻은 응력-변형률 선도와의 차이를 목적함수로 하여 목적함수를 최소로 하는 최적화를 수행하였다. 이 방법으로 JC 모델 계수를 결정하였고, 시험과 해석으로 구한 응력-변형률 선도가 잘 일치함을 알 수 있었다. 실험과 해석을 연계한 최적화 방법으로 재료 물성 계수를 결정하는 방법론을 제안하였다.
LoG 윤곽선 검출 기법을 적용한 새로운 미세먼지 측정 방법 설계
장택진,인치호,Jang, Taek-Jin,Lin, Chi-Ho 한국인터넷방송통신학회 2022 한국인터넷방송통신학회 논문지 Vol.22 No.5
In this paper, we propose a new method for measuring fine dust through a LoG(Laplacian of Gaussian)-based edge detection technique. CCTV-based images in a video are collected for fine dust measurement, and image ranges are designated through RoI(Region of Interest). After clustering by applying the GMM(Gaussian Mix Model) to the specified area, we detect edge through the LoG algorithm and measure the detected edge strength. The concentration of fine dust is determined based on the measured intensity data of the edge. In this paper, we propose algorithm as the effectiveness of experiment. As a result of collecting and applying CCTV image in the video installed around the laboratory of this school for a month from June to July, the measured result value was proved through this experiment to be sufficient to calculate the concentration and range of fine dust.
장택진(Taek Jin Jang),안준영(Jun-young Ahn),최다빈(Da Been Choi),김종봉(Jong-bong Kim) 대한전기학회 2021 대한전기학회 학술대회 논문집 Vol.2021 No.10
본 연구에서는 자동차 충돌과 같은 재료의 고속 변형을 신뢰성 높게 모사하기 위해 정확한 동적 물성 계수를 결정하는 방법을 제안하였다. 최적화 방법을 통한 동적 계수 결정 방법을 제안하였고, 제안된 방법과의 비교를 위해 기존에 동적 물성 계수 결정에 주로 사용되는 핏팅 방법을 사용하여 동적 물성 계수를 결정하였고, 이를 제안된 방법과 비교하였다. 결과적으로 본 연구에서 제안된 방법이 기존의 방법보다 정확한 동적 물성 계수를 결정할 수 있음을 보였다.