http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
논문 : 분말야금 ; 금속간화합물의 연소합성에 미치는 승온속도의 영향에 관한 연구(1) (이론적 배경)
이승헌 ( Seung Hurn Lee ),안정식 ( Jung Sik Ahn ),이종현 ( Jong Hyun Lee ),장영섭 ( Young Seob Jang ),이룡호 ( Yong Ho Lee ),김용석 ( Yong Seog Kim ) 대한금속재료학회 ( 구 대한금속학회 ) 1998 대한금속·재료학회지 Vol.36 No.7
Effects of heating rate on the temperature profile of the combustion synthesis and on the homogeneity of the reaction product are investigated. Analysis of the temperature profile using a simple mathematical model indicated that a significant fraction of reactants is consumed during the precombustion duration, forming intermetallic compounds at the reactant interface, which was confirmed experimentally. The relationship between the parameters measured from the temperature profile and the degree of conversion of reactants to products are discussed.
육상 단거리 차렷 자세 동작에서 팔 넓이가 운동학적 요인에 미치는 영향
윤희중,장영섭 한국운동역학회 2000 한국운동역학회지 Vol.10 No.1
본 연구는 육상 단거리 차렷 자세 동작에서 팔넓이와 출발 동작의 운동학적 요인과의 관계를 규명하는데 그 목적이 있다. 이를 위하여 2000년 현재 선수등록이 되어 있는 대학 · 실업 선수 5명을 선정하였으며, 평상시 취하는 팔넓이에 ±2.5㎝를 계산하여 실험을 실시하였다. 이를 두 대의 비디오카메라로 녹화하여 DLT 기법을 통하여 3차원영상분석을 실시한 후 각 요인들을 분석한 결과 다음과 같은 결론에 도달하였다. 1. 인체 중심의 이동 변위는 저자세(-2.5m), 중자세 그리고 고자세(+2.5m) 순으로 가장 많은 이동 변위를 나타냈으며, 국면별로는 3국면, 1국면 그리고 2국면 순으로 많은 이동 변위를 나타냈다. 2. 보폭은 저자세(-2.5m), 고자세(+2.5m) 그리고 중자세 순으로 긴 보폭을 나타냈으며, 구면별로는 3국면,1국면 그리고 2국면의 순으로 많은 이동 변위를 보이고 있었다. 3. 인체 중심 이동 소요 시간은 중자세, 저자세(-2.5m) 그리고 고자세(+2.5m)순으로 빠르게 나타났다. 4. 인체 중심과 몸통의 순간 속도는 중자세와 저자세에서 빠르게 나타났다. 5. 발분절의 순간 속도는 고자세(+2.5m), 저자세(-2.5m) 그리고 중자세 순으로 빠르게 나타났다. 6. 몸통의 각도는 고자세(+2.5m)에서 몸통을 가장 많이 숙이는 것으로 나타났다. The purpose of this study is to investigate the relationship between the width of the arm joint at attention and displacement, time, angle and velocity factors of starting motion for male sprinters. 2 S-VHS video cameras were used for the data collection. The following conclusions were drawn : 1. In the displacement of CG according to width of the arm joint was shown longest displacement in low position(-2.5㎝) medium position and high position(+2.5㎝), By the phase, it was shown longest diplacement in 3 phase, 1 phase and 2 phase. And in the height of CG was alike form of change. But medium position was shown faster form of change than other position. 2. In the length of stride was shown longer in low position(-2.5㎝), high position(+2.5㎝) and medium position. By the phase, it was shown longest displacement in 3 phase, 1 phase and 2 phase. 3. In the time of CG was shown shorter in medium position, low position(-2.5㎝) and high position(+2.5㎝). 4. In the velocity of CG and trunk was shown faster in low position(-2.5㎝) and medium position. 5. In the velocity of the foot segment was shown faster in high position(+2.5㎝), low position(-2.5㎝) and medium position. 6. In the angle of trunk was shown smallest angle in high position(+2.5㎝).
가압 자전 고온 반응 합성법에 의한 MoSi2 의 치밀화
김영도,김용석,이기욱,가미다,장영섭 대한금속재료학회(대한금속학회) 1995 대한금속·재료학회지 Vol.33 No.8
In this paper, the possibility of synthesis and in-situ densification of MoSi₂ alloys using the thermal explosion mode of Self-propagating High-temperature Synthesis was demonstrated. Mo-Si powder mixture synthesized by SHS process under 35MPa yielded porous MoSi₂ product. Proper combinations of the processing variables including the applied pressure, diluent contents, and alloying elements(Al and Ti) yielded the product density up to 99% theoretical density.
직접 질화법에 의한 Al/AiN 경사기능재료의 제조에 관한 연구
김재윤,이경재,김석윤,김용석,장영섭 대한금속재료학회(대한금속학회) 1995 대한금속·재료학회지 Vol.33 No.10
Al/AlN FGMs were fabricated by the direct nitridation of Al/AlN powder compact. The density of a compact presintered at 600℃ in argon atmosphere followed by the reaction in nitrogen atmosphere at 900℃ for 4hours was improved to 97% of theoretical density. The reaction product was consisted of a dense ceramic layer on its surface and a ceramic-Al metal mixed layer beneath the layer. The reaction layer thickness was affected by the processing variables including AlN content. Al powder size and Mg content.