http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
반사 손실 합성법을 이용한 GSM900/DCS1800/PCS1900 내장형 안테나 설계
장병찬,김채영,Jang, Byung-Chan,Kim, Che-Young 한국전자파학회 2007 한국전자파학회논문지 Vol.18 No.5
본 논문은 GSM900, DCS1800, PCS1900 대역을 동시에 만족시킬 수 있는 삼중 대역 안테나 설계에 관한 연구이다. 제안된 구조는 소형화와 견고성을 위해 유전체 위에 2개의 금속 가지를 접어서 만든 형태이다. 금속 가지의 길이를 조정하여 반사 손실을 합성시켜서 광대역을 구현하였다. 안테나의 반사 손실은 모의 실험을 통해 구하였으며, 이를 측정값과 비교하였다. 모의 실험은 상용 툴인 Ansoft사의 HFSS 9를 사용하였고, 수치 비교 결과, 원하는 주파수 대역에서 -10 [dB] 이하의 반사 손실을 얻었다. 또한, 안테나의 이득과 복사 패턴을 원거리장 측정 시스템을 사용하여 전파 무반사실에서 측정하였다. 측정 결과 최대 이득은 3.0 [dBi], 평균 이득은 -1.0 [dBi] 이상의 양호한 특성을 보였으며, 대역 내 2개의 주파수의 복사 패턴은 서로 유사하였다. This paper proposes the design scheme of internal triple band antenna intended for using in GSM900, DCS1800, and PCS1900 bands. The suggested folding metal plates of the two branches are mounted on a dielectric coated ground plane for size miniaturization and durability. Return losses are overlapped when length of metal branches are controlled. This is important technique for wide band operation. For the suggested antenna geometry its return loss was calculated by HFSS 9 simulator, and was shown to be -10 [dB] less within the required band. Also, gain and radiation pattern of antenna were measured using far field measurement system in an anechoic chamber. The measured peak gain is more than 3.0 [dBi], and the average gain is over -1.0 [dBi] for the triple band, which is regarded as satisfactory for the internal antenna application. Also, the radiation pattern for two frequencies shows a similar shape each other within the required band.
Barium 도핑에 따른 Li[Ni0.6−xBaxCo0.1Mn0.3]O2(x=0, 0.01) 의 구조 분석 및 전기화학적 특성
장병찬,유기원,양수빈,민송기,손종태 한국전기화학회 2014 한국전기화학회지 Vol.17 No.4
리튬 이차전지 양극소재인 Ni-rich계의 Li[Ni1-x-yCoxMny]O2는 높은 방전용량을 갖고 있지만 Ni의함량이 많아짐으로써, 구조적 안정성과 전기화학적 특성이 떨어지는 문제점이 있다. 이러한 문제점을해결하기 위해 양이온 도핑에 대한 연구가 시행되고 있다. 본 연구는, 공침법을 이용하여 제조한Ni0.6Co0.1Mn0.3(OH)2 전구체를 사용하여 바륨(Ba)이 도핑된 Li[Ni0.6-xBaxCo0.1Mn0.3]O2 (x=0.01)를합성하였고, 바륨(Ba)의 도핑에 따른 구조적 안정성 및 전기화학적 특성을 연구하였다. 구조적 특성분석을 위한 X선-회절분석 결과, 바륨(Ba) 도핑시 I(006)+I(102)/I(101)(R-factor)비가 감소하는 것을 통해층상구조의 안정성이 증가한 것을 확인하였고, 전기 화학적 특성이 개선될 것으로 예측하였다. 전기화학적 분석 결과, 바륨(Ba)을 도핑한 전극의 경우 과전압의 감소로 Li[Ni0.6Co0.1Mn0.3]O2 전극보다Li[Ni0.6-xBaxCo0.1Mn0.3]O2 (x=0.01)전극의 방전용량이 23 mAhg-1 증가하였고, 구조적 안정성의 증가로 싸이클 특성의 개선과, 전극과 전해액 간의 전하이동 저항의 감소로 인하여 고율특성 특성이 개선된 것을 확인 하였다.
장병찬,유기원,양수빈,민송기,손종태,Jang, Byeong-Chan,Yoo, Gi-Won,Yang, Su-Bin,Min, Song-Gi,Son, Jong-Tae 한국전기화학회 2014 한국전기화학회지 Vol.17 No.4
Ni-rich system $Li[Ni_{1-x-y}Co_xMn_y]O_2$ of lithium secondary battery cathode material keep a high discharge capacity. However, by the Ni content increases, there is a problem that the electrochemical properties and stability of the structure are reduced. In order to solve these problems, research for positive ion doping is performed. The one of the cathode material, barium-doped $Li[Ni_{0.6-x}Ba_xCo_{0.1}Mn_{0.3}]O_2$ (x=0.01), was synthesized by the precursor, $Ni_{0.6}Co_{0.1}Mn_{0.3}(OH)_2$, from the co-precipitation method. The barium doped materials have studied the structural and electrochemical properties. The analysis of structural properties, results of X-ray diffraction analysis, and those results confirmed the change of the lattice from the binding energy in the structure by barium doping. Increased stability of the layered structure was observed by $I_{(006)}+I_{(102)}/I_{(101)}$(R-factor) ratio decrease. we expected that the electrochemical characteristics are improved. 23 mAh/g discharge capacity of barium-doped $Li[Ni_{0.6-x}Ba_xCo_{0.1}Mn_{0.3}]O_2$ (x=0.01) electrode is higher than discharge capacity of $Li[Ni_{0.6}Co_{0.1}Mn_{0.3}]O_2$ due to decrease overvoltage. And, through the structural stability was confirmed that improved the cycle characteristics. We caused a reduction in charge transfer resistance between the electrolyte and the electrode was confirmed that the C-rate characteristics are improved. 리튬 이차전지 양극소재인 Ni-rich계의 $Li[Ni_{1-x-y}Co_xMn_y]O_2$는 높은 방전용량을 갖고 있지만 Ni의 함량이 많아짐으로써, 구조적 안정성과 전기화학적 특성이 떨어지는 문제점이 있다. 이러한 문제점을 해결하기 위해 양이온 도핑에 대한 연구가 시행되고 있다. 본 연구는, 공침법을 이용하여 제조한 $Ni_{0.6}Co_{0.1}Mn_{0.3}(OH)_2$ 전구체를 사용하여 바륨(Ba)이 도핑된 $Li[Ni_{0.6-x}Ba_xCo_{0.1}Mn_{0.3}]O_2$ (x=0.01)를 합성하였고, 바륨(Ba)의 도핑에 따른 구조적 안정성 및 전기화학적 특성을 연구하였다. 구조적 특성분석을 위한 X선-회절분석 결과, 바륨(Ba) 도핑시 $I_{(006)}+I_{(102)}/I_{(101)}$(R-factor)비가 감소하는 것을 통해 층상구조의 안정성이 증가한 것을 확인하였고, 전기 화학적 특성이 개선될 것으로 예측하였다. 전기화학적 분석 결과, 바륨(Ba)을 도핑한 전극의 경우 과전압의 감소로 $Li[Ni_{0.6}Co_{0.1}Mn_{0.3}]O_2$ 전극보다 $Li[Ni_{0.6-x}Ba_xCo_{0.1}Mn_{0.3}]O_2$ (x=0.01)전극의 방전용량이 $23mAhg^{-1}$ 증가하였고, 구조적 안정성의 증가로 싸이클 특성의 개선과, 전극과 전해액 간의 전하이동 저항의 감소로 인하여 고율특성 특성이 개선된 것을 확인 하였다.