http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Cdma2000 3X 다중 반송파 채널 분리용 수치 제어 발진기
임인기,김환우,Lim In-Gi,Kim Whan-Woo 한국통신학회 2004 韓國通信學會論文誌 Vol.29 No.11A
We propose a foe phase tuner and a rounding processor for a numerically controlled oscillator (NCO), yielding a reduced phase error in generating a digital sine waveform. By using the fine Phase tuner Presented in this paper, when the ratio of the desired sine wave frequency to the clock frequency is expressed as a fraction, an accurate adjustment in representing the fractional value can be achieved with simple hardware. In addition, the proposed rounding processor reduces the effects of phase truncation on the output spectrum. Logic simulation results of the NCO for multi-carrier channel separation in cdma2000 3X multi-carrier receive system using these techniques show that the noise spectrum and mean square error (MSE) are reduced by 8.68 dB and 5.5 dB, respectively compared to those of truncation method and 2.38 dB and 0.83 dB, respectively, compared to those of Paul's scheme. 본 논문에서는 위상 오차를 개선한 디지털 사인 파형 생성을 위한 수치 제어 발진기 (NCO, Numerically Controlled Oscillator) 내의 세부 위상 조정기와 라운딩 처리기를 제안한다. 본 논문에서 제안된 세부 위상 조정기를 사용함으로써 원하는 사인 파형 출력 주파수와 클록 주파수와의 관계가 분수 관계식으로 나타나는 경우, 간단한 하드웨어의 사용으로 세부 조정값 B/A를 정확하게 처리할 수 있다. 또한 제안된 라운딩 처리기는 출력 스펙트럼 상에서 위상 잘라버림의 효과를 감소시킬 수 있다. 제안된 기술들을 cdma2000 3X 다중 반송파 채널 분리용 수치 제어 발진기에 적용하여 모의 실험한 결과 잡음 스펙트럼과 평균 자승 오차가 잘라버림 대비 8.68 dB와 5.5 dB 감소하였고, Paul 구조 대비 2.38 dB와 0.83 dB 감소함을 확인하였다.
A Numerically Controlled Oscillator with a Fine Phase Tuner and a Rounding Processor
임인기,김환우 한국전자통신연구원 2004 ETRI Journal Vol.26 No.6
ABSTRACT⎯We propose a fine phase tuner and a rounding processor for a numerically controlled oscillator (NCO), yielding a reduced phase error in generating a digital sine waveform. By using the fine phase tuner presented in this paper, when the ratio of the desired sine wave frequency to the clock frequency is expressed as a fraction, an accurate adjustment in representing the fractional value can be achieved with simple hardware. In addition, the proposed rounding processor reduces the effects of phase truncation on the output spectrum. Logic simulation results of the NCO using these techniques show that the noise spectrum and mean square error (MSE) for eight output bits of a 3.125 MHz sine waveform are reduced by 8.68 dB and 5.5 dB, respectively, compared to those of the truncation method, and 2.38 dB and 0.83 dB, respectively, compared to those of Paul’s scheme. ABSTRACT⎯We propose a fine phase tuner and a rounding processor for a numerically controlled oscillator (NCO), yielding a reduced phase error in generating a digital sine waveform. By using the fine phase tuner presented in this paper, when the ratio of the desired sine wave frequency to the clock frequency is expressed as a fraction, an accurate adjustment in representing the fractional value can be achieved with simple hardware. In addition, the proposed rounding processor reduces the effects of phase truncation on the output spectrum. Logic simulation results of the NCO using these techniques show that the noise spectrum and mean square error (MSE) for eight output bits of a 3.125 MHz sine waveform are reduced by 8.68 dB and 5.5 dB, respectively, compared to those of the truncation method, and 2.38 dB and 0.83 dB, respectively, compared to those of Paul’s scheme.
임인기,김경수,조한진 한국통신학회 1999 韓國通信學會論文誌 Vol.24 No.12
본 논문은 길쌈 부호화 (convolutional encoding) 및 인터리빙(interleaving) 기법을 사용하는 채널 부호기에 있어서 메모리 크기를 최소화한 설계 방법에 관한 것이다. 기존의 구현방식에서는 프레임 데이터를 보관하는 입력버퍼 RAM과 인터리빙을 위한 인터리버 RAM을 별도로 사용해야 한다. 본 논문에서는 메모리 크기가 큰 인터리버 RAM을 사용하는 대신 입력버퍼 RAM 1개를 추가로 사용하여 길쌈 부호화 및 인터리빙을 동시에 처리할 수 있는 새로운 채널 부호기 설계 방법을 제안하였다. 이 설계 방법을 여러 디지털 이동통신 모뎀의 채널 부호기에 적용한 결과 기존 설계 방식에 비해 33% ∼60%의 메모리 크기 감소 효과가 있었으며, 프레임 데이터 수신 시 처리 절차가 간편해지고 타이밍 마진을 늘일 수 있는 장점이 있었다. In this paper, we present a memory efficient implementation method of channel encoder using convolutional encoding and interleaving. In conventional method, two separate RAMs must be used for the channel encoder: one RAM for storing frame data and another RAM for interleaving. In our method, without using interleaving RAM, we only use two small RAMs for buffering input frame data. We can process convolutional encoding and interleaving concurrently by using the two RAMs. There are several advantages when applying channel encoder designed using this method to several digital mobile telecommunications : the reduction of memory size ranging 33 % - 60 %, simplified procedure of receiving frame data, and resultant timing margin gained by the simplified procedure.