http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
인교진,안흥용 강원대학교 부설 석재복합신소재 제품연구센터 2003 석재연 논문집 Vol.8 No.-
본 연구에서는 폴리머 복합체의 일종인 폴리머 콘크리트의 내후성과 가공성을 개선하기 위하여, 스티렌 모노머에 MMA를 혼합하여 물성변화에 대한 연구를 수행하였다. 프로필렌 글리콜, 무수 말레인산, 무수프탈산을 축합 중합하였으며, 수지에 대하여 40wt%의 스티렌 모노머를 첨가하였다. 스티렌 모노머를 포함한 불포화폴리에스테르 수지(UPR)에 대하여 MMA를 0-50wt%를 첨가하였다. MMA와 UPR과의 상용성을 증대시키기 위하여, UPR 수지의 말단에 아크릴기를 도입한 수지를 제조한 후 물성을 비교하여 보았다. 인장강도 시험용 시편을 제조하여 만능시험기로 인장 강도실험을 실시한 결과 MMA의 함량이 40-50%일 때 최고치를 나타내었다. 시료의 점탄성적 물성을 DTMA를 이용하여 측정하였으며, MMA의 함량이 증대됨에 따라 저장 탄성률E'이 증대됨을 알 수 있었다. 특히 아크릴기를 분자말단에 도입한 UP 수지의 경우 저장 탄성률E'이 크게 증대되었다. 따라서 아크릴기의 도입에 의해 UPR의 MMA와의 상용성이 크게 증대되고 또한 물성도 향상되었음을 알 수가 있었다. In this study structure and property relationship of the UP resins containing MMA in order to improve the weatherability and processability of the polymer concretes was surveyed. UP resins were synthesized by condensation polymerization of propylene glycol, maleic anhydride and phthalic anhydride. The polymerized resin was subsequently dissolved into styrene to make 40wt.% solution. 0~50wt.% of MMA to the resin was added. Tensile test specimens were prepared according to the ASTM. UP resins containing 40~50wt% MMA/resin shows best tensile stress. Dynamic mechanical properties measurements by DMTA show storage modulus E' increased with increase of MMA contents. Especially the UP resins containing acryl group in the chain show much improved modulus. This result indicates that the improved mechanical properties attribute from the compatibility between UP resin and monomers. The results of DMTA are coincident with those of tensile test.
Clay 또는 은 나노 입자를 함유한 불포화 폴리에스테르 수지의 물성에 관한 연구
인교진,목진규,신동현,김주영 강원대학교 부설 석재복합신소재 제품연구센터 2004 석재연 논문집 Vol.9 No.-
본 연구에서는 불포화 폴리에스테르 수지에 clay 또는 평균 10 nm의 은 나노 입자를 분산시켜 나노 복합체를 제조하여 그 물성 변화를 관찰하였다. clay를 함유한 나노 복합체에 대하여 XRD 분석을 한 결과, clay 층상 구조에 해당하는 회절 피크가 나타나지 않는 것으로 보아 clay의 층간 거리가 벌어져 있음을 알 수 있었다. 그러나 TEM 관찰 결과를 보면 clay 층이 완전히 박리 된 것은 아니고, clay 층 사이에 고분자 사슬이 삽입되어 있는 삽입형 나노 복합체임을 확인할 수 있었다. 또 불포화 폴리에스테르 은 나노 복합체의 경우 수지 내에 은 나노 입자가 고르게 분산되어 있음을 알 수 있었다. clay를 함유한 나노 복합체의 기계적 물성을 DMA로 분석한 결과 저장 탄성률(E´)은 최대 57% 증가함을 보였다. TGA로 분석한 열적 물성에서는 열분해 온도가 최대 18℃ 정도 증가하였다. 이는 clay가 불포화 폴리에스테르 수지의 기계적, 열적 성질에 영향을 주었기 때문인 것으로 판단되었다. 불포화 폴리에스테르 은 나노 복합체의 경우도 은 나노 입자가 고분자 매트릭스와의 상호작용으로 인해 기계적, 열적 물성이 향상되었다. 또, 은 나노 복합체의 경우 은 특유의 성질인 항균성에 있어서 매우 우수한 물성을 나타내었다. In this study, made nanocomposites that dispersed clay or silver nanoparticles of average 10 nm is unsaturated polyester resins and observed change of the properties. According to the result of XRD analysis about nanocomposites containing clay, diffraction peak that correspond to structure of layerd-clay does not appear and could know that exfoliation of distance between layerd-clay. But, seeing TEM image, layerd-clay is not exfoliated perfectly, and could confirm Intercalated Nanocomposites that polymer chain is intercalated between clay layer. Also, it could know that silver nanoparticles is dispersed in unsaturated polyester resins in the case of unsaturated polyester-silver nanocomposites. The result that analyze mechanical properties of nanocomposites which containing clay by DMA showed Storage Modulus(E´) increased maximum 57 %. Also, Pyrolysis temperature increased maximum 18 ℃ in thermal properties that analyze by TGA. Because clay influenced in mechanical and thermal property of unsaturated polyester resins. In case of UP-silver nanocomposites, advanced mechanical and thermal properties because silver nanoparticles interacted with polymer matrix. Also, it appeared properties in Antibacterial that is silver characteristic property in silver nanocomposites.