http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이승윤,박정수,김용진,Lee, S.Y.,Park, J.S.,Kim, Y.J. 한국전자통신연구원 2000 전자통신동향분석 Vol.15 No.6
본 고에서는 현재 전세계적으로 진행되고 있는 차세대인터넷 망 구축 동향을 소개한다. 한국의 KOREN IPv6 프로젝트를 포함한 미국의 Internet2 백본인 vBNS, 유럽의 IPv6 프로젝트인 6INIT, 캐나다의 광 인터넷 백본인 CANARIE의 CA*net 프로젝트 그리고 일본의 WIDE 프로젝트에서 수행중인 IPv6 기반 차세대 인터넷 망 구축현황에 대해 소개한다.
이승윤,정해원,Lee, S.Y.,Jung, H.W. 한국전자통신연구원 2010 전자통신동향분석 Vol.25 No.3
최근 모바일 환경은 스마트폰의 확산에 따라 가히 혁명적인 변화를 가져오고 있으며, 이제 이동통신서비스 시장은 기존 음성 서비스 중심에서 데이터 서비스 중심으로 이동하며, 사용자 중심의 콘텐츠가 서비스의 경쟁력을 좌우하는 소위 2.0 시대에서의 새로운 비즈니스 환경을 요구하고 있다. 특히, 웹을 기반으로 하는 유무선 통합모바일 서비스는 많은 가능성을 시사하면서 새로운 가치를 만들어내고 있다. 이미 모바일 웹 기술은 과거 단순 브라우징 기술을 넘어 다양한 응용 서비스 제공을 위한 웹 기술로 확장되고 있으며, 본격적인 플랫폼으로서의 기능을 제공하는 수준으로 발전되고 있다. 본 고에서는 최근 이루어지고 있는 차세대 모바일 웹 표준화를 중심으로 주요 이슈 및 표준화 동향을 분석하고 나아가 대응전략을 모색하고자 한다.
74리터 FCV용 라이너 개발을 위한 2단계 정역드로잉 금형설계
이승윤(S. Y. Lee),강성훈(S. H. Kang),김준현(J. H. Kim),김덕기(D. K. Kim),김병민(B. M. Kim) 한국소성가공학회 2010 한국소성가공학회 학술대회 논문집 Vol.2010 No.10
In this work, finite element simulations were carried out to investigate the effect of the die design in the two-stage reverse drawing process on the formability for manufacture of 74 liter aluminum liner used in fuel cell vehicle. For this, Cockroft and Latham ductile fracture criterion was employed for the purpose of predicting fracture occurrence according to the die design. In order to prevent the wrinkle or fracture during drawing process, the effects of drawing-ratio, punch and die corner radii, holding force were analyzed. Through the FE investigation, die design and reasonable blank holding force were provided to prevent the fracture and wrinkle. In addition, one of experimental results with fracture was shown when the unsuitable die design was adopted.
이승윤(Lee S.Y.),황인혁(Hwang, I.H.),신종계(Shin J.G.) 대한조선학회 2011 대한조선학회 학술대회자료집 Vol.2011 No.11
조선 산업에서 선표계획은 선박의 수주 및 도크배치, 건조일정의 결정과 연계되어 회사의 영업목표 달성과 안정된 생산활동을 위한 의사 판단 기준을 제공하고, 생산 환경의 다양한 변화에 대응하고, 생산성 향상에 기여하는 생산 관리 활동의 핵심적인 활동이다. 하지만, 선표계획 단계는 일정계획의 초기 단계로 선박건조와 관련된 정보가 부족하고 도크 가동률을 최대화하는 계획 과정에서 선표계획의 문제 및 실행 가능성에 대한 예측이 어렵다. 따라서 선표계획에 대한 정량적 평가 또는 비교 평가를 위한 기준의 설정이 필요하다. 본 논문에서는 선표계획 프로세스와 정보흐름 분석을 통해 선표계획과 관련된 주요 평가항목을 도출하고, 도출한 평가항목에 대해 계층적분석과정을 통해 항목 간의 우선순위를 결정하였다. 이 결과는 선표계획의 리스크를 평가하기 위한 기준항목으로 활용될 수 있다.
FCV용 74리터 알루미늄 라이너 최적성형을 위항 역드로잉 공정설계에 관한 연구
이승윤(S. Y. Lee),강성훈(S. H. Kang),이영선(Y. S. Lee),김병민(B. M. Kim),김준현(J. H. Kim) 한국소성가공학회 2010 한국소성가공학회 학술대회 논문집 Vol.2010 No.5
In this work, finite element investigations were carried out to optimize reverse drawing process design for manufacture of 74 liter aluminum liner used in fuel cell vehicle. For this, three-stage reverse drawing process with optimized process design was suggested in terms of prevention of wrinkle and fracture. The tensile tests with aluminum alloy AI6061 annealed at 350℃ were carried out to obtain the flow stresses. In order to estimate more accurate flow stresses after necking, the flow stresses were estimated from the comparison of load vs. displacement curves which were obtained from experimental and simulation results of tensile tests. In case of finite element analyses of reverse drawing processes, it was focused on the effects of process designs such as punch and die designs, blank holding force, drawing ratio and the clearance between the punch and blank holder on the generation of wrinkle and fracture of the blank. And then, the final optimization of drawing process design was made in terms of minimization of blank thickness change, forming load and critical value of ductile fracture.
역 드로잉에 의한 74리터 알루미늄 라이너 성형 시 부분가열의 효과
이승윤(S. Y. Lee),강성훈(S. H. Kang),김준현(J. H. Kim),김병민(B. M. Kim) 한국소성가공학회 2011 한국소성가공학회 학술대회 논문집 Vol.2011 No.5
In the previous work, fracture generation according to blank holding force, drawing ratio, comer radius of punch and die was analyzed by experiments and FE simulation based on ductile fracture criterion. However, even though optimum die designs obtained from FE simulation were used in experiments, fracture still took place during reverse drawing process due to the lower drawability. Thus, in this work, partial heating on the end of the drawn cup obtained from the first drawing process was applied and its effect on the drawability was investigated by FE simulation. It was found from the simulation results that the drawability can be enhanced and the sound aluminum liner without fracture can be achieved due to the partial heating on the end of the first drawn cup.
AHP 기법을 통한 조선소 생산 계획 시스템 효율화 방안에 대한 연구
이승윤(Lee, S.Y),남승훈(Nam, S.H),백명기(Back, M.G),남종호(Nam, J.H.),신종계(Shin, J.G) (사)한국CDE학회 2011 한국 CAD/CAM 학회 학술발표회 논문집 Vol.2011 No.1
조선 산업에서 높은 생산성 확보를 위해 생산 관리에 대한 연구는 지속되어 왔다. 그 중에서도 생산 관리의 정도를 높이고 가용 자원의 활용을 최대화 하는 생산 계획은 생산 관리에 있어서 핵심적인 요소이다. 이에, 본 연구에서는 생산성 확보를 위한 수단으로써, 조선소 생산 계획 시스템을 분석하고 보다 효율적인 활용을 위한 방안을 모색하였다. 이를 위해 보다 체계적이고 정량적인 대안 도출을 위한 방법으로 AHP 기법을 통한 대안평가를 수행하고 시스템 구현을 위한 정보 모델링을 수행하였다.