http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이상흥,장성재,임종원,백용순,Lee, S.H.,Chang, S.J.,Lim, J.W.,Baek, Y.S. 한국전자통신연구원 2017 전자통신동향분석 Vol.32 No.6
In this paper, we review studies attempting to triumph over the limitation of Si-based semiconductor technologies through a heterogeneous integration of high mobility compound semiconductors on a Si substrate, and the co-integration of electronic and/or optical devices. Many studies have been conducted on the heterogeneous integration of various materials to overcome the Si semiconductor performance and obtain multi-purpose functional devices. On the other hand, many research groups have invented device fusion technologies of electrical and optical devices on a Si substrate. They have co-integrated Si-based CMOS and InGaAs-based optical devices, and Ge-based electrical and optical devices. In addition, chip and wafer bonding techniques through TSV and TOV have been introduced for the co-integration of electrical and optical devices. Such intensive studies will continue to overcome the device-scaling limitation and short-channel effects of a MOS transistor that Si devices have faced using a heterogeneous integration of Si and a high mobility compound semiconductor on the same chip and/or wafer.
이상흥,김도우,구경완 永同大學校 1999 硏究論叢 Vol.5 No.1
GaAs MESFET는 동작점에 따라 선형영역, 포화영역으로 구분된 모델을 사용함에 따라, GaAs MESFET 회로 해석을 위한 컴퓨터 시뮬레이션 시 영역의 경계점에서의 1차 2차 미분 불연속으로 인한 해의 발산 문제가 발생하곤 하였다. 본 논문에서는 선형영역과 포화영역을 모두 포함한 통합된 채널길이변조식을 제안하였다. 새로이 제안된 채널길이변조식을 이용하여 전류-전압 모델과 커패시턴스-전압 모델을 제안하였다. 제안된 전류-전압 모델은 Shur의 모델과 비교하였으며 제안된 커패시턴스-전압 모델은 디바이스 시뮬레이션 결과와 비교하였다. 비교된 결과로부터 제안된 모델들은 연속성이 개선될 것으로 기대된다. In the conventional GaAs MESFET circuit simulation, the DC and transient simulation results are often failed due to the discontinuities of the first and second order derivatives arising from the use of separate models in linear, saturation, and transition regions. In this paper, we propose a unified drain current-voltage model by using a unified channel length modulation effect that is derived by extending the channel length modulation effect in the saturation region to the linear region. Calculated results from the proposed drain current-voltage model agree well with the results of Shur model. Also, we propose a unified capacitance model for linear, transition, and saturation regions by using a unified channel length modulation effect. Its results from the proposed capacitance model agree well with 2-D device simulation results. Thus, the proposed models are expected to be useful in circuit simulations.
DSRC 송신기를 위한 능동발룬 내장형 5.8 GHz SiGe 상향믹서 설계 및 제작
이상흥,이자열,김상훈,배현철,강진영,김보우,Lee Sang heung,Lee Ja yol,Kim Sang hoon,Bae Hyun cheol,Kang Jin yeong,Kim Bo woo 한국통신학회 2005 韓國通信學會論文誌 Vol.30 No.4A
DSRC provides high speed radio link between Road Side Equipment and On-Board Equipment within the narrow communication area. In this paper, a 5.8 GHz up-conversion mixer for DSRC communication system was designed and fabricated using 0.8 m SiGe HBT process technology and IF/LO/RF matching circuits, IF/LO input balun circuits, and RP output balun circuit were all integrated on chip. The chip size of fabricated mixer was $2.7mm\times1.6mm$ and the measured performance was 3.5 dB conversion gain, -12.5 dBm output IP3, 42 dB LO to If isolation, 38 dB LO to RF isolation, current consumption of 29 mA for 3.0 V supply voltage. 근거리무선통신 (Dedicated Short Range Communication, DSRC)은 지능형교통시스템 서비스 제공을 위한 통신 수단으로, 수 미터에서 수백 미터인 근거리 영역의 노변장치(Road Side Equipment, RSE)와 차량탑재장치(On-Board Equipment, OBE)와의 양방향 고속통신을 수행하는 통신시스템이다. 본 논문에서는 SiGe HBT 공정을 이용하여 근거리무선통신 송신기용 5.8 GHz 상향믹서를 설계 및 제작하였다. 설계된 상향믹서는 믹서코어 회로와 더불어 IF/LO/RF 입출력 정합 회로, IF/LO 입력 발룬 회로와 RF 출력 발룬 회로가 단일칩으로 구현되었다. 제작된 상향믹서는 $2.7 mm\times1.6mm$의 크기를 가지며, 3.5 dB의 전력변환이득과 -12.5 dBm의 OIP3, 42 dB의 LO to E isolation, 38 dB의 LO to RF isolation, 3.0 V의 공급전압 하에서 29 mA의 전류소모로 측정되었다.
이상흥,송호준,이기준 대한전자공학회 1996 전자공학회논문지-A Vol.33 No.6
In the conventional GaAs MESFET circuit simulation, the DC and transient simulation results are often failed due to the discontrinuities of the first and second order derivatives arising from the use of separate C-V models in linear, satruration, and transition regions. In this paper, we propose a unified capacitance model for linear, transition, and saturation regions by using a unified channel length modulation effect that is derived by extending the channel length modulation effect in the saturation region to the linear region. Calculated resutls from the proposed capacitance model agree well with 2-D device simulation resutls. Thus, the proposed model is expected to be useful in circuit simulation.
이상흥,양경호 조선대학교 부설 의학연구소 2002 The Medical Journal of Chosun University Vol.27 No.1
Introduction : We evaluated radiographic and clinical results of 18 hips (14 patients) that had a primary total hip arthroplasty using ABG femoral stem. Material and methods : From August 1992 to May 1997, 14 patients(18 Hips) were treated at chosun University hospital. The average age of the patients was 47 years. Sixteen cases were men and two were women. The average follow up period was 80 months. Results : The average Harris hip score was 92 points postoperatively and excellent or good clinical results were 17hips(94%). Osteolysis was seen in 7 hips, but no femoral loosening or stem failure were observed. No revision was performed for any femoral reason. Conclusion : We concluded that the design of ABG stem can obtain press-fit fixation and HA coatings can obtain rigid stem bone fixation by osteoconduction and ostcointegration. For more good result, stem design and HA coating study are needed.