http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
탄화규소 캔들형 필터의 제조 및 고온고압 하에서의 성능평가
이상훈,이승원,이기성,한인섭,서두원,박석주,박영옥,우상국,Lee, Sang-Hun,Lee, Seung-Won,Lee, Kee-Sung,Han, In-Sub,Seo, Doo-Won,Park, Seok-Joo,Park, Young-Ok,Woo, Sang-Kuk 한국세라믹학회 2002 한국세라믹학회지 Vol.39 No.5
가압유동층 복합발전용으로 사용 가능한 탄화규소 캔들형 필터를 압출성형법으로 제조하였다. 필터의 기공율을 조절하기 위해 2.5 vol%의 탄소분말을 첨가하였고, 필터의 강도를 부여하기 위해 무기결합제로써 점토와 $CaCO_3$를 첨가하였다. 평균 기공율이 약 40%, 평균 기공크기가 약 $47{\mu}m$인 지지체 위에 평균 기공크기가 약 $10{\mu}m$를 갖도록 탄화규소 분말을 분무 코팅하였고, 이후 대기압 분위기 하에서 1400${\circ}C$의 온도로 소결하였다. 코팅층이 형성된 캔들형 필터를 500${\circ}C$, $5kgf/cm^2$의 고온, 고압 하에서 성능평가를 행한 결과 입자크기별 집진 성능이 모두 99.99% 이상을 나타내었다. 따라서 제조된 탄화규소 캔들형 필터는 가압유동층 연소가스에 포함되어 있는 미세한 먼지를 효과적으로 제거할 수 있을 것으로 판단되었다. Silicon carbide candle filters for the pressurized fluidized bed combustion system were fabricated by extrusion process. Carbon black was added to control the porosity. Inorganic additives such as clay and calcium carbonate were added to exhibit appropriate strength. Silicon carbide layer with a finer pore size (mean pore diameter ~$10{\mu}m$) was coated on the silicon carbide support layer (mean pore diameter ~$47{\mu}m$, porosity ∼40%). After that, the filter was sintered at 1400${\circ}C$ in air. We evaluated the filtration performances of the filter at 500${\circ}C$ and $5kgf/cm^2$ of pressure. As a result, high separation efficiency, >99.999% was measured. It is expected that silicon carbide candle filter can be successfully used for the pressurized fluidized bed combustion system.
지능형 휠체어 적용을 위해 Haar-like의 기울기 특징을 이용한 아다부스트 알고리즘 기반의 보행자 인식
이상훈,박상희,이영학,서희돈,Lee, Sang-Hun,Park, Sang-Hee,Lee, Yeung-Hak,Seo, Hee-Don 대한의용생체공학회 2010 의공학회지 Vol.31 No.6
In this paper, we suggest an advanced algorithm, to recognize pedestrian/non-pedestrian using differential haar-like feature, which applies Adaboost algorithm to make a strong classification from weak classifications. First, we extract two feature vectors: horizontal haar-like feature and vertical haar-like feature. For the next, we calculate the proposed feature vector using differential haar-like method. And then, a strong classification needs to be obtained from weak classifications for composite recognition method using the differential area of horizontal and vertical haar-like. In the proposed method, we use one feature vector and one strong classification for the first stage of recognition. Based on our experiment, the proposed algorithm shows higher recognition rate compared to the traditional method for the pedestrian and non-pedestrian.
2단 3상 PWM AC/DC 컨버터를 이용한 동기발전기 여자제어시스템
이상훈,이동희,안진우,Lee, Sang-Hun,Lee, Dong-Hee,Ahn, Jin-Woo 한국조명전기설비학회 2007 조명·전기설비학회논문지 Vol.21 No.3
동기발전기의 출력전압은 여자 시스템의 계자 전류 제어에 의해 일정하게 유지된다. 현재 대부분의 발전기 여자기의 여자전류제어를 위해 사용되는 AVR 시스템의 AC/DC 컨버터 부는 출력전압 제어가 가능한 위상제어 컨버터나 출력전압을 제어할 수 없는 다이오드 정류기와 DC/DC 컨버터를 결합하여 사용하고 있다. AC/DC 전력 변환장치로서 위상제어 컨버터나 출력전압을 제어할 수 없는 다이오드 정류기의 경우, AVR시스템의 전력을 공급하는 모선의 역률저하 및 저차 고조파 발생의 문제점을 야기 시키게 된다. 본 논문에서는 동기발전기의 여자전류 제어를 위해 사용되는 AVR 시스템 설계에 있어 단위역률 동작이 가능한 Boost형 AC/DC 컨버터와 모선의 부하변동에 속응성 있게 동작할 수 있는 전류 제어형 Buck 컨버터를 결합한 2단 3상 PWM AC/DC 컨버터에 대해 연구하였다. 제안된 AC/DC 컨버터를 시뮬레이션 한 결과 Boost 컨버터의 경우 단위 역률 동작 및 출력 DC 전압의 Boost 동작이 원할히 이루어졌으며, Buck 컨버터의 경우 다른 위상제어 컨버터에 비해 응답시간이 개선되었음을 알 수 있었다. The terminal voltage of a synchronous generator is maintained by the field current control of excitation system. Generally AC/DC converter which is component of AVR(Automatic Voltage Regulator) system for excitation current control is connected to diode rectifier and DC/DC converter system. In the case of diode rectifier system of phase controlled converter as AC/DC converter have low power factor and harmonics of lower order in the line current. In this paper, two stage three phase PWM AC/DC converter is studied to solve these problems. The characteristics of a proposed converter reduces the harmonics and reactive power of the distribution line and has fast dynamic response in transient period using boost converter and current control mode buck converts. The proposed method is verified by the computer simulation and experimental results in prototype generation system.
이상훈,Lee, Sang-hun 한국막학회 2021 멤브레인 Vol.31 No.5
The use of membranes for MBRWG (Membrane Bioreactor for Waste Gas) treatment can provide highly selective separation of a waste gas stream followed by effective biological removal. MBRWG have several potential advantages, among which the most distinctive one is separation of gas and liquid phases at each side of membrane potentially allowing the optimal biomass control toward effective biodegradation of target gases as well as biofilm activation. This advantage becomes especially favorable for removal of hydrophobic toxic gases, such as xylene, by MBRWG systems, because the mass transfer, the toxicity, and thereby the biodegradation of hydrophobic gas treatment requires sensitive handling of liquid stream and water control near biofilm. Among various membranes for MBRWG treatment, PDMS-hollow fiber membranes provide the high gas mass transfer. Despite lower specific surface areas, capillary type membranes are also applied current MBRWG studies. In addition to the main application of membranes as biofilm supporter in MBRWG systems, there can be another application of membranes in a posterior process for removal of residual gases or dusts emitted from conventional biological waste gas treatment processes. 멤브레인 기반의 MBRWG (Membrane Bioreactor for Waste Gas) 처리기술은 폐가스 흐름에 대한 높은 선택성을 바탕으로 효과적인 생물학적 제거를 수행할 수 있다. MBRWG에는 몇 가지 잠재적 이점이 있는데, 이 중 가장 두드러진 점은 기상과 액상이 멤브레인 양쪽으로 명확히 분리되어 액상 내 생물막의 최적제어가 용이하고 이를 통해 효과적인 생분해와 생물막의 활성화를 도모할 수 있다는 것이다. MBRWG 처리기술은 특히 xylene 같은 소수성 독성 기체 성분 제거에 유리한데 이는 소수성 기체의 물질전달속도, 독성 및 제거율이 생물막 인근의 액상흐름 및 수분제어에 민감하게 변화하기 때문이다. MBRWG 처리에 쓰이는 다양한 멤브레인 중에서 PDMS-중공사막(hollow fiber)이 가장 높은 기체 물질 전달을 제공한다고 보고되었다. Capillary 형태도 중공사막형태에 비해 비표면적은 낮지만 비교적 활발한 연구가 진행되고 있다. 소수성 기체성분 제거 외에도 기존 생물학적 폐가스 처리 장치에서 배출된 잔류 기체 혼합물이나 먼지를 제거하기 위한 후단 공정에서 멤브레인 활용을 고려할 수 있다.