http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
확장표면을 적용한 액체식 제습기에서 제습액 분배 특성에 관한 실험적 연구
이민수(Minsu Lee),장영수(Young-Soo Chang),이대영(Dae-Young Lee) 대한설비공학회 2009 대한설비공학회 학술발표대회논문집 Vol.2009 No.-
Liquid desiccant cooling technology can supply cooling by using waste heat and solar heat which are hard to use effectively. For compact and efficient design of a dehumidifier, it is important to sustain sufficient heat and mass transfer surface area for water vapor diffusion from air to liquid desiccant on heat exchanger. In this study, the plate type heat exchanger is adopted which has extended surface, and hydrophilic coating and porous layer coating are adopted to enhance surface wettedness. PP(polypropylene) plate is coated by porous layer and PET(polyethylene terephthalate) non-woven fabric is coated by hydrophilic polymer. These coated surfaces have porous structure, so that falling liquid film spreads widely on the coated surface foaming thin liquid film by capillary force. The temperature of liquid desiccant increases during dehumidification process by latent heat absorption, which leads to loss of dehumidification capacity. Liquid desiccant is cooled by cooling water flowing in plate heat exchanger. On the plate side, the liquid desiccant can be cooled by internal cooling. However the liquid desiccant on extended surface should be moved and cooled at heat exchanger surface. Optimal mixing and distribution of liquid desiccant between extended surface and plate heat exchanger surface is essential design parameter. The experiment has been conducted to verify effective surface treatment and distribution characteristics by measuring wall side flow rate and visualization test. It is observed that hydrophilic and porous layer coating have excellent wettedness, and the distribution can be regulated by adopting holes on extended surface.
빅데이터 기반 건설업 사고재해와 미세먼지 농도의 상관관계 분석
이민수(Lee, Minsu),정재민(Jeong, Jaemin),정재욱(Jeong, Jaewook),이재현(Lee, Jaehyun) 대한건축학회 2022 대한건축학회논문집 Vol.38 No.1
Due to construction work being done outdoors, construction workers are affected by harmful environmental factors such as Particulate Matter (PM<SUB>10</SUB>) with a diameter of 10 ㎍/m³ or less. If directly inhaled by humans, it could have a fatal impact. Contrary to the diverse analysis available regarding the health impact of PM<SUB>10</SUB>, there is not much research to be found in the correlation between construction accidents and PM<SUB>10</SUB> levels. Therefore, this study aims to analyze this relationship and its relative importance. The method used involved collecting data, classifying data, analyzing the relative importance of construction accidents by concentration of PM<SUB>10</SUB>, correlation analysis between accidents and PM<SUB>10</SUB> and variance analysis of concentration levels of PM<SUB>10</SUB> at construction accident sites. This analysis resulted in discovering that most accidents occurred when the average level of PM<SUB>10</SUB> (31㎍/m³) was present. Regarding relative importance, it was identified that the frequency of construction accidents had a significant positive relationship with the level of PM<SUB>10</SUB> (R=0.846), the highest was at the level of PM<SUB>10</SUB> (123 ㎍/m³). This study suggests that high levels of PM<SUB>10</SUB> is a potential cause of accidents occurring at construction sites.
바이너리 분석도구 효율성 평가를 위한 Instrumentation 성능 측정기법
이민수(Minsu Lee),이제현(Jehyun Lee),김호빈(Hobin Kim),류찬호(Chanho Ryu) 한국정보보호학회 2017 정보보호학회논문지 Vol.27 No.6
바이너리 instrumentation 기법은 소스코드가 공개되어 있지 않은 프로그램을 모니터링하거나 디버깅을 통해 오류를 진단, 또는 메모리 정보획득 등을 위해 개발, 발전되어왔다. 그러나 instrumentation 기법을 사용한 바이너리 분석기법에 관한 연구들은 주로 그 활용방법과 누락없는 정확한 분석에 집중하고 있으며, 실용적 측면에서 중요한 성능지표인 효율성에 대한 연구는 거의 이뤄지지 않고 있다. 특히 분석도구나 알고리즘의 분석시간을 상호 비교할 수 있는 지표와 방법론이 정립되어있지 않았다. 이 연구는 바이너리 instrumentation 기법의 오버헤드를 측정하여 그 효율성을 비교평가할 수 있는 단위기능과 측정방법론을 제안한다. 또한 제안한 방법을 DynamoRIO와 Pin에 적용하여 성능차를 도출하였다. 분석도구의 효율성 비교결과는 사용목적에 따른 분석도구의 선택기준이 되며, 측정방법론은 기존도구와 앞으로 새롭게 개발될 분석도구들에 대해서도 그 효율성을 검증하는 방법으로 사용될 수 있다. Binary instrumentation has been developed for monitoring and debugging executables without their source codes. Previous efforts on the binary instrumentation are mainly focused on its capability and accuracy, but not on efficiency for practical application. In particular, criteria and measurement methodologies for evaluating and comparing the efficiency of binary investigation tools and algorithms do not estimated yet. In this paper, we propose the instrumentation primitives which are a unit functionality and measurement methodology. Through the empirical experiments by adopting the proposed methodology on DynamoRIO and Pin, we show the feasibility of the proposal.
실리콘 박막 태양전지용 금속 기판재의 반사 특성에 관한 연구
이민수(Lee, Minsu),한윤호(Han, Yoonho),엄호경(Um, Hokyung),안진호(Ahn, Jinho),임태홍(Yim, Taihong) 한국신재생에너지학회 2011 한국신재생에너지학회 학술대회논문집 Vol.2011 No.05
실리콘 박막 태양전지는 기판의 표면형상에 따라 셀 내부에서 이동하는 빛의 광학적인 경로가 크게 증가하여 변환효율의 향상을 기대할 수 있다. 금속 기판은 다양한 표면형상으로 가공이 용이하고 강도와 인성이 우수하며 가격이 저렴하여 실리콘 박막 태양전지의 기판재로 활발한 연구가 진행되고 있다. 본 연구에서는 금속 기판의 표면형상이 반사특성에 미치는 영향을 알아보고자 하였다. 금속 기판재의 표면형상은 기계적 연마 방식을 응용하여 다양하게 제작하였다. 반사특성을 보기 위하여 UV-visible spectrometer를 사용하여 총 반사율과 산란 반사율을 측정하였고, 표면 형상에 따른 Fe-Ni 기판과 Ag 후면반사막의 반사 특성이 태양전지 셀 내부의 광포획의 증가에 어떠한 영향을 주는지 비교 분석하였다.