http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이건호,송근호,박기완,구본석 대한이비인후과학회 2019 대한이비인후과학회지 두경부외과학 Vol.62 No.9
Langerhans cell sarcoma is a rare, proliferative tumor of Langerhans cells, which shows cytologiccharacteristics and clinical features of malignant tumor. Langerhans cell sarcoma primarilyoccurs in lymph nodes, skin, lung, liver, and spleen. However, very few cases have beenreported in the head and neck region. Because of its rarity, an optimal treatment approach isunknown; however, Langerhans cell sarcoma grows aggressively and shows a poor prognosis,such that a more aggressive and multi-modality treatment approach is necessary. Here, we reportthe case of a 36-year-old male with Langerhans cell sarcoma, who presented with a massin the submandibular gland area and was treated with wide excision and postoperative radiotherapy.
Alkasite와 기존의 수복 재료의 압축강도 및 미세경도 비교
이건호,김종수,신지선,한미란 대한소아치과학회 2020 大韓小兒齒科學會誌 Vol.47 No.3
The aim of this study was to compare compressive strength and microhardness of recently introduced alkasite restorative materials with glass ionomer cement and flowable composite resin. For each material, 20 samples were prepared respectively for compressive strength and Vickers microhardness test. The compressive strength was measured with universal testing machine at crosshead speed of 1 mm/min. And microhardness was measured using Vickers Micro hardness testing machine under 500 g load and 10 seconds dwelling time at 1 hour, 1 day, 7 days, 14 days, 21 days and 35 days. The compressive strength was highest in composite resin, followed by alkasite, and glass ionomer cement. In microhardness test, composite resin, which had no change throughout experimental periods, showed highest microhardness in 1 hour, 1 day, and 7 days measurement. The glass ionomer cement showed increase in microhardness for 7 days and no difference was found with composite resin after 14 days measurement. For alkasite, maximum microhardness was measured on 14 days, but showed gradual decrease. 이 연구의 목적은 최근 소개된 alkasite 수복재료의 압축강도와 미세경도를 글라스아이오노머 시멘트와 유동성 복합레진과 비교하여 alkasite 수복재의 물성을 예측하는 것이었다. 압축강도와 비커스 미세경도 측정을 위해 각 재료당 20개의 시편을 제작하였다. 만능시험기를 사용하여 초 당 1 mm 횡단 속도 하에서 압축강도를 측정하였으며, 미세경도는 비커스 미세경도 측정기를 사용하여 보압 시간(dwelling time) 10초 조건 하에서 500 g의힘을 가해 시편 제작 1시간, 1일, 7일, 14일, 21일, 35일 후에 측정하였다. 연구결과 압축강도는 복합레진이 가장 높았으며 alkasite, 글라스아이오노머 시멘트 순이었다. 미세경도 측정 결과 복합레진은 연구기간동안 미세경도의 변화가 없었으며 시편제작 1시간 후, 1일차, 7일차 측정까지 가장 높은 미세경도를 보였다. 글라스아이오노머 시멘트의 경우 7일차까지 미세경도가 증가하여 복합레진과 차이가 없어진 반면, alkasite는 14일차까지 서서히 미세경도가 증가하다가이후 다시 감소하는 양상이 관찰되었다.