양성자 주입 기술을 이용한 초고속 회복 다이오드의 제작

이강희,김병길,이용현,백종무,이재성,배영호,Lee, Kang-Hee,Kim, Byoung-Gil,Lee, Yong-Hyun,Baek, Jong-Mu,Lee, Jae-Sung,Bae, Young-Ho 한국전기전자재료학회 2004 전기전자재료학회논문지 Vol.17 No.12

Proton irradiation technology was used for the improvement of power diode switching characteristics. Proton irradiation was carried out at the energies of 2.32 MeV, 2.55 MeV, 2.97 MeV so that the projection range of irradiated proton would be at the metallurgical junction, depletion region and neutral region of pn diode, respectively. Dose conditions were varied into three conditions of 1${\times}$10$^{11}$ cm$^{-2}$ , 1${\times}$10$^{12}$ cm$^{-2}$ , 1${\times}$10$^{13}$ cm$^{-2}$ at each condition of energies. Characterization of the device was performed by I-V(current-voltage), C-V(capacitance-voltage) and trr(reverse recovery time) measurement. At the optimum condition of irradiation, the reverse recovery time of device has been reduced about 1/5 compared to that of original un-irradiated device.

토복령(土茯笭)이 RAW264.7 대식세포주에서 산화질소 억제에 미치는 영향

이강희,정준희,김이화,이재혁,Lee, Kang-Hee,Jung, Jun-Hee,Kim, Ee-Hwa,Lee, Jae-Hyuk Society for Meridian and Acupoint 2009 Korean Journal of Acupuncture Vol.22 No.2

Objectives : 본 연구의 목적은 제습, 해독, 통리관절등의 효능이 있는 토복령이 RAW264.7 대식세포주에서 lipopolysaccharide(LPS)로 처치하여 생성되는 nitric oxide(NO)와 prostaglandin $E_2$($PGE_2$)에 억제작용이 있는지 관찰하고자 하는 것이다. Methods : 토복령이 RAW264.7 대식세포주에 세포독성이 유무를 관찰하기 위하여 농도별 MTT assay를 수행하여 세포생존율을 측정하였다. 또한 LPS로 염증유발된 RAW264.7 대식세포주에서 토복령의 농도별 처치가 NO 및 $PGE_2$ 생성억제에 미치는 영향을 관찰하고자 NO 및 $PGE_2$ assay를 수행하였다. Results : 토복령의 농도별 처치가 RAW264.7 대식세포주에서 세포독성을 유발하는지 MTT assay로 측정한 결과 세포독성은 관찰되지 않았으며, 토복령은 LPS처치로 인하여 증가된 NO 및 $PGE_2$ 생성을 통계학적으로 유의하게 감소시킴을 관찰하였다. Conclusions : 본 연구를 통하여 토복령은 RAW264.7 대식세포주에서 LPS로 유도된NO 및 $PGE_2$ 생성을 효과적으로 억제시킴으로써 추후 염증질환의 치료제로서 가능성을 확인하였다.

교육시설의 옥상방수 열화도 진행 모델에 관한 연구

이강희,채창우,류수훈,Lee, Kang-Hee,Chae, Chang-U,Ryu, Soo-Hoon 한국교육시설학회 2017 敎育施設 Vol.24 No.6

Education facilities have much affect to make a good condition for the learning environment. Therefore, various approaches have been conducted to improve the physical, social and educational achievement. Especially, the physical aspect is very important to get rid of the building defect and improve the student their learning environment. For these, it needs to explain the performance and function of components and materials, which is linked with the deterioration degree. The deterioration degree is a imperative factor to make a decision whether the component would be repaired or not and to provide the repair scope of its component. In this paper, it aimed at making the deterioration degree model of roof proof under the hypothesis of which deterioration degree would be equal the repair cost at this time. Results of the study are shown that first, the $3^{rd}$ function is most proper to explain the deterioration degree model among 11 functions in view of resulted statistics. Second, the inflection of deterioration is shown at 15yr of the elementary school and 13yr of the middle and high school. This study has a limit of disclassification of the component or materials and it is, therefore, favorable to include the classification of waterproof material and work. These results would make a change from the breakdown maintenance to preventive maintenance and give a decent the learning environment for student.

공동주택 구성재의 예상수선시기 범위 설정 연구

이강희,Lee Kang-Hee 한국주거학회 2006 한국주거학회 논문집 Vol.17 No.2

Building would be deteriorated with time elapse, influenced by its geographic situation, climate and other environmental conditions. In addition, the systematic maintenance could be provided to keep the resident a recent living condition. The existing breakdown maintenance will be changed into the preventive maintenance. The preventive maintenance is required to get the repair time, the repair scope and frequency. In this paper, it aimed at providing the repair time range over the building components, utilizing the relation between the determination curve and the performance recovery through repair. Results of this study are as follows : First, the forecast of the repair time over the building components could be calculated and equalized with the deterioration and performance degree. Second, the repair time range of building components would be provided into five categories and 3rd repair time. Results of this study will set up the long-term repair plan of building, and finally keep an housing condition comfortable.

공동주택 공종별 수선시기 설정 연구

이강희,박근수,채창우,Lee, Kang-Hee,Park, Geun-Soo,Chae, Chang-U 한국주거학회 2011 한국주거학회 논문집 Vol.22 No.4

Apartment is settled down as a main housing type and massive supply has been conducted since 1990's. The government has focused on the housing supply to improve the housing number and cut its price. On the contrary, the management of the housing has been neglected to get an early deterioration. Since 1995's, various ways have been made to improve and maintain the building function and performance. Among these, the long-term repair plan has played a main role to manage the housing condition and plan the repair schedule for preparing the massive cost of repair such as a roof proof, elevator change. The long-tern repair plan provides the repair time and repair rate according to various construction types. Most of the management agent apply the repair standard into the field area. But the repair time could not reflect the present condition and bring into the wrong maintenance. Therefore, the repair time for the long-term maintenance plan would be revised and reflected from the material and technology development. |n this study, it aimed at improvement for the repair time in various construction types which are provided in the long-term repair plan. For this, the 22 management agents are surveyed directly. This study shows that the repair time of the painting are correspondent to the repair time of the long-term plan irregardless of the painting materials. Most of other areas would correspondently similar to the long-term plan. This study could not include the building location, material and other haracteristics. Therefore, the further study would be needed to reflect the building and materials attributes to get the detailed repair time.

공동주택의 관리비 추정모델 연구

이강희,양재혁,채창우,Lee, Kang-Hee,Yang, Jae-Hyuk,Chae, Chang-U 한국주거학회 2010 한국주거학회 논문집 Vol.21 No.2

The maintenance cost plays a important role to plan the scale of the apartment housing such as a number of household, building area and building type. Therefore, it is required to forecast the cost considering various maintenance characteristics. The maintenance characteristics are floor area, number of household, heating type, site area and etc.. In addition, the maintenance cost are classified into 5 area. These are a personal expense, facility maintenance cost, energy and water cost, insurance and sanitary cost. These five cost area are related with various characteristics and brought up the estimation model using the stepwise multiple regression analysis. The energy and heating cost share over the 50% in the total cost and the personal expense cost shares about 40%. The personal expense cost per area is 5,272 won/$m^2{\cdot}yr$ irregardless of heating type and the district heating type is a higher cost than other type. In facility maintenance cost, the central heating type is 2,015 won/$m^2{\cdot}yr$ and higher than other type. The estimation models have good statistics in each model. Most of the model have a determination coefficient over 0.7 and Durbin Watson value between 1.5 and 2.5.

공동주택의 라이프사이클 에너지와 이산화탄소 추정에 관한 연구

이강희,채창우,Lee, Kang-Hee,Chae, Chang-U 한국주거학회 2008 한국주거학회 논문집 Vol.19 No.4

The environment has played a key role to improve the living condition and develop the industry. In building industries, we should consider the environment and mitigate the environmental affect. For mitigating the its affect, various areas of building technology have been developed and applied into filed work. In addition, the process in applying into field requires to conduct the assessment of the environmental affect and improve its applied technology. A lot of assessment methods are proposed in evaluate the building condition such as post-occupancy evaluation, life cycle management and life cycle assessment. Among these assessment methods, life cycle assessment is effectively utilized the environmental affect in building life cycle. Therefore, this paper aimed at analyzing the energy consumption and $CO_2$ emission in building life cycle, using the life cycle assessment and application of the example in apartment housing. This study shows that the maintenance and the production of building materials stage shares most of the amount of energy consumption and $CO_2$ emission and therefore plays an important role to planning the building in terms of the life cycle. Second, the other stages brings about a very small amount. It is important to decide the building shape and contents to mitigate the environmental affect in terms of material, volume, the pattern of the energy use and others.

공동주택 구성재의 경제적 수선형태 설정 연구

이강희,채창우,Lee, Kang-Hee,Chae, Chang-U 한국주거학회 2006 한국주거학회 논문집 Vol.17 No.5

Building components have been deteriorated by various factors such as location, a building type, a surrounding environment and so on. In addition, each component has a peculiar characteristics, compared with other components in properties of matter an used part. Building components would be required to maintain its function and performance to provide the resident with a decent living condition. It is important to decide the repair time, scope and a required cost in repair plan, considering the each component's characteristics. In this parer, it aimed at providing the economic repair pattern to analyze the relation of the time-elapse and the cumulative repair cost in the apartment housing using 3rd quadratic function. Results of the study are as follows: First, the shape of the function for the economic repair is classified into two type. One is the continuous increase type of the cumulative cost which properly means the iterative repair type after built. The other is that the function has the maximum state at a point which means one-repair after its repair would be delayed to a scheduled time. Second, the iterative repair pattern would include window, roof proof, lighting and water supply pipe. The other repair pattern would include the paintings, heating pipe and sign board.

임대공동주택 구성재의 열화도 패턴에 관한 연구

이강희,Lee Kang-Hee 한국주거학회 2006 한국주거학회 논문집 Vol.17 No.4

Most of buildings have been deteriorated with time-elapse by reflection of the building location, material, environmental circumstances and so on. The performance would go down and be demolished if anything could not be done after constructed. The maintenance should be required to preserve a decent living condition or improve a inferior condition by various plans and practices. The maintenance plan needs various data such as a repair scope, a repair time, a forecasted cost, a plan of management and so forth. Among the above required data for planning the maintenance, the deterioration characteristics of the building components would be first analyzed. The deterioration pattern would be a key role to affect and make a maintenance plan. In this paper, it aimed at classifying the deterioration patterns of building components. A deterioration pattern would be analyzed between the cumulative repair cost and time-elapse and modeled with these relations. A deterioration patterns are classified into 4 types-a accelerated type, a straight type, a temporary type and a slowly type. As a result of this research, a accelerated type includes window, window frame, general paintings, general water proofing in building components. A straight type includes the lacquer paintings, furnishings in building components and water supply pipe, boiler, sanitaries in mechanical facilities and lighting in electric facilities. Based on these research results, further study should be conducted to include any other components and an estimating model.

공동주택 구성재의 내용년수 산정방법에 관한 연구

이강희,장정희,채창우,Lee Kang-Hee,Chang Jung-Hee,Chae Chang-U 한국주거학회 2005 한국주거학회 논문집 Vol.16 No.5

The performance of building should be deteriorated with time while the building would maintain and manage the function and performance to get a living condition. For the efficient maintenance of the building, the repair cycle would be provided and applied during the service-life time. The service-life time of the building components would be needed to determine the repair time and the repair scope. The service-life time of the building components would be calculated with the 1st repair time and the recovery rate of the performance, considering the recovery rate after repaired. In this paper, the 1st repair time would be estimated with the normal probability distribution, choice probability and 3rd quadratic function. The recovery rate of the building components assumes various level according to the research target and utility area. The results of this study are as follows ; first, most of the components of the building work would range about 30 years in the service-life time and the components of the mechanical works range from 28 years to 37 years, those of the electrical works would be about 31 years.