http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
농경잔류물로부터 헤미셀룰로오스 가수분해물 생산을 위한 산촉매 열수 분별공정의 특성 비교
유경선,오경근,황종서 한국화학공학회 2022 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.60 No.3
본 연구의 목적은 국내 대표적인 농경잔류물인, 볏짚과 보릿짚을 이용하여 헤미셀룰로오스 부분의 최대 가용화를 위한 산 촉매 열수 분별공정의 타당성을 조사한 것이다. 1.2-2.9 범위의 반응가혹도(CS; Combined reaction severity)에서다양한 분별 조건들을 사용하여 초기 반응조건 기준을 설정했다. 볏짚의 경우, 160 ℃의 반응온도, 0.75%(w/v)의 H2SO4, 20분의 반응시간, 그리고 1:15의 고체/액체 비율을 가진 반응 조건에서 56.6%의 헤미셀룰로스 당 수율을 얻을 수 있었으며, 보릿짚의 경우, 150 ℃ 반응온도, 0.75%(w/v) H2SO4, 15분의 반응시간, 1:10의 고체/액체 비율에서 83.0%의 헤미셀룰로스 당 수율을 얻었다. 따라서, 볏짚과 비교하여 보릿짚의 경우 산촉매 열수분획을 효과적으로 수행할 수 있었다. 분별과정 후 남은 분획된 고형분은 볏짚과 보릿짚에서 각각 48.5%와 57.5%였다. 분별된 볏짚과 보릿짚의XMG(Xylan+Mannan+Galactan) 함량은 17.3% 및 17.6%에서 6.0% 및 2.6%로 각각 감소하였으며, 이는 원료 짚 기준으로 각각 16.7% 및 8.5%에 해당한다. 또한, 보리 짚의 산촉매 열수분별 과정에서 과도한 분해로 인해 셀룰로오스 및XMG의 5.6% 및 8.5%만 손실된 반면, 볏짚의 셀룰로오스 및 XMG 손실은 6.4% 및 26.6%이었다. 볏짚의 헤미셀룰로스 당은 산 촉매 열수 분별공정중, 다소 높은 반응가혹도로 인해 심하게 과분해된 것에 기인한다.
유경선,이수영,김은혜,현동훈,정병조 국제차세대융합기술학회 2017 차세대융합기술학회논문지 Vol.1 No.2
본 논문은 기존에 사용되어지는 직진성이 강한 LED가 광학계와 결합되었을 때의 단점을 보완 개선하기 위한 연구이다. 직신성이 강한 LED를 조사면에 비추었을 때 패턴이 형성되는 것을 극대화시키기 위해서 전반사 렌즈를 사 용하였다. 렌즈와 채결된 LED PKG를 1개만 배열하여 조사면에 비추었을 때, 8개를 일렬 배열하여 조사면에 비추었을 때, 8개를 팔각 배열했을 때로 나눠 시뮬레이션을 진행하였다. 시뮬레이션 결과 데이터 중 Luminous Intensity RGB 차 트로는 조사면에 비추어진 배광 패턴을 비교‧분석하였다. 배광 분포 곡선에서는 수평, 수직에서의 각을 비교하여 수치 적인 개선 방법 연구를 수행하였다. 본 연구를 통해서 조명 기구에서 생길 수 있는 패턴을 LED PKG의 배열을 통해서 상쇄시킬 수 있다는 것을 고안하였으며, 이 방법으로 PCB를 제작하면 실용적으로 렌즈의 성능을 향상시킬 수 있고, 금 형 제작 비용을 절감할 수 있을 것으로 사료된다. This paper is a study to improve and complement for defects when LEDs with strong linearity which are conventionally used are combined with the optical system. A Total reflection lens was used to maximize the formation of the pattern when the directivity LED was illuminated on the illuminated surface. When only one LED PKG decided to be lens and picked up was irradiated on the illuminated surface, simulation was carried out by dividing it into three arranged when eight were arrayed side by side and illuminated on the illuminated surface, and eight LEDs arranged in octagonal arrangement it was. In the simulation result data, the luminous intensity RGB chart compares and analyzes the light distribution pattern displayed on the illuminated surface. We studied numerical improvement method of light distribution curves by comparing horizontal and vertical angles. Through this study we devised that patterns that can occur in lighting fixtures can be canceled via the arrangement of LED PKGs and we fabricated PCBs in this way parctically we can improve the performance of the lens, it can be considered that it is possible th reduce the cost of metal mold production.