http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
왕용필,정종원,정동일,Wang, Yong-Peel,Jeong, Jong-Won,Jeong, Dong-Il 한국조명전기설비학회 2007 조명·전기설비학회논문지 Vol.21 No.3
최근 전력 전자 응용 기기의 사용증가로 비선형 특성 부하에 의한 고조파가 상당히 발생하고 있으며, 이에 의한 영향으로 배전시스템의 변압기 열화, 소자의 고장, 통신 간섭 등의 여러 가지 문제를 발생시키고 있다. 따라서 배전 시스템에서의 고조파 수준과 전달특성을 정확하게 분석하기 위하여 배전시스템의 효과적인 실측정과 모델링에 관한 연구가 필요한 실정이다. 본 논문에서는 고조파 관리기준 IEC61000-3-6 토대로 배전 시스템의 고조파 특성을 해석하기 위하여 공통 결합점(Point of Common Coupling : PCC)을 선택하였다. 실 배전 시스템의 PCC 지점에서 고조파 전압, 전류를 측정하여, 고조파 분포, 비선형 부하 성분 및 고조파 전압, 전류 왜형률 (Voltage/Current Total Harmonic Distortion: VTHD/ITHD)을 분석하였다. 또한 정상상태에서 고조파 임피던스, 전압, 전류을 해석을 통하여 실 배전시스템을 효과적이고 정확하게 모델링 되었을 확인하였다. 또한 고조파 전류원 발생시에 고조파 전압, 전류를 비교 분석하여 고조파 전달특성을 조사하였다. The increasing use of power electronic equipment in distribution system has been the reason for the greater concern about a harmonic in recent time. Therefore, it is necessary for measurement and modelling to analyze a harmonic level and a transfer characteristic in distribution system. In this paper, the Point of Common Coupling (PCC) is selected to analyze harmonic characteristic of distribution system by IEC 61000-3-6. Harmonic voltage and orient were measured at the PCC of real distribution system Harmonic distribution, nonlinear load component and Total Harmonic Distortion(THD) were verified. The effective and accurate modelling of real distribution system were proved through a analysis of harmonic impedance, voltage and current under steady-state. Harmonic transfer characteristic were investigated through a analysis of harmonic voltage and current under harmonic current source.
왕용필(Yong-Peel Wang),김세동(Se-Dong Kim),전영수(Young-Soo Jeon),주석민(Seok-Min Joo) 한국조명·전기설비학회 2008 조명·전기설비학회논문지 Vol.22 No.12
현재 국외에서는 고조파 제어 및 유지를 위해 관리기준이 제정되어 적용되고 있는 실정이나 국내에서는 적당한 기준 및 적용절차가 없이 제대로 고조파를 관리하지 못하고 있는 실정이다. 따라서 국내 송전계통의 특성에 맞으면서 국제 기준의 주요 목적을 반영할 수 있는 고조파 관리기준을 제정할 필요성이 제기되고 있다. 따라서 본 논문에 서는 마이크로소프트 엑셀을 이용하여 고압 수용가의 고조파 방출 한계를 평가하는 소프트웨어를 개발하였다. In recent years, the standard for harmonics has established and applied in many couintries. However a harmonic management has not performed for the absence of standard and procedure in Korea. For this reason, the standard establishment for harmonic based on the main purpose of international harmonic standards and property of domestic transmission system is required. This paper describes the software of assessment of harmonic emission limit for customer at HV System using Microsoft Excel.
Electromagnetic Transient and Harmonic Simulation for Power System Including Converter System
왕용필(Yong-Peel Wang),한형주(Hyeong-Ju Han),김찬혁(Chan-Hyeok Kim),노대석(Dea-seok Rho) 대한전기학회 2010 대한전기학회 학술대회 논문집 Vol.2010 No.7
The complexity of modern power systems often makes it impractical to model it in its entirety for electromagnetic transient studies. Therefore areas outside the immediate area of interest must be represented by some form of frequency dependent network equivalent (FDNE). This paper presents z-domain rational function formulation and demonstrates the use of it for the assessment of the transient response of the Lower South Island of New Zealand. Moreover by using a well publicized test system and providing complete information on the developed FDNE coefficients, other researchers can easily benchmark their work against this.
전기설비 시공기술 발전을 위한 MASTER SPEC. 및 운용시스템 개발
왕용필(Yong-Peel Wang),안준호(Joon-Ho Ahn),박민영(Min-Young Park),장영길(Young-Gill Jang),서순석(Soon-Seok Seo),김광곤(Gwang-Gon Kim) 대한전기학회 2009 대한전기학회 학술대회 논문집 Vol.2009 No.7
전기설비 시공분야에서 전문적 시방서 관리 체계는 그동안 별도로 존재하지 않았으며, 각 발주기관별 자체적 관리체계 하에서 운영 유지되어 왔다. 따라서 명칭이 서로 상이한 부분과 진술 및 구성의 체계 또한 일관되지 못한 부분이 많았다. 본 연구개발을 통하여 전기설비 분야의 시방서를 체계적이고, 공통된 의사표현이 가능한 기준시스템 필요성이 대두되어 이에 따른 기준시방서 시스템의 개발과 운영체계를 개발하였다.
기술표준과 거버넌스: 전기공사 Master Spec. 사례연구
왕용필(Yong-Peel Wang),안준호(Joon-Ho Ahn),박민영(Min-Young Park),최승동(Seung-Dong Choi),조현석(Hyun-Suk Cho),민병원(Byoung-Won Min) 대한전기학회 2009 대한전기학회 학술대회 논문집 Vol.2009 No.7
전기공사협회가 추진하는 전기설비시공의 '마스터 스펙 프로젝트'는 민간에 의한 '표준 제정'의 사례에 해당한다. 이 글에서는 표준 제정의 환경 및 요소에 따라 마스터 스펙의 특성을 분석한다. 분석결과, 마스터 스펙의 제정과정은 산업협회(association) 중심의 거버넌스 형태를 띠는 것으로 나타났으며, 이 경우는 특정 산업 부문 내에서 이루어지는 합의 방식이 표준 제정의 특징으로 보인다. 한편, 우리나라에서 산업에 대한 규제나 지원이 정부 주도로 이루어진다는 점, 산업분류에서 전기공사업의 위치가 이중적이라는 점, 또 전기공사 산업 부문이 분산적 산업구조를 띠고 있다는 점 등이 마스터 스펙의 제정에 영향을 미치는 것으로 분석되었다. 그러므로 전기공사협회는 마스터 스펙을 제정하면서 수직적 · 수평적 전기공사업 관련 조직들을 관리하면서 합의형성을 추진하고 제정 과정을 관리해야 할 것이다.
벡터 적합을 이용한 전자기 과도현상 및 고조파 시뮬레이션
왕용필(Yong-Peel Wang),안준호(Joon-Ho Ahn),박민영(Min-Young Park),김경훈(Kyoung-Hoon Kim),허동렬(Dong-Ryol Hur) 대한전기학회 2009 대한전기학회 학술대회 논문집 Vol.2009 No.7
전력시스템 전자기 과도현상은 시간 영역에서 정확하고 효과적으로 해속되어져야 한다. 그러나 대규모 전력시스템을 상세하게 표현하기 위해서는 엄청난 계산량이 필요하다. 따라서 전력시스템 과도현상을 해석하기 위하여 전력시스템의 작은 부분은 상세하게 표현하고, 나머지 부분은 효과적으로 등가 시스템이 필요하다. 본 논문에서는 모든 주파수 영역에서 등가 시스템을 개발하기 위하여 벡터 적합을 이용하여 Z 영역 유리함수 계수를 추정하여 주파수 의존 등가 시스템을 개발하였다. 개발한 FDNE의 우수성을 입증하기 위하여 테스트 시스템에 적용하여 시스템이 고장시 전자기 과도현상 및 고조파 평가를 비교 · 검토하였다.
공종분류체계를 이용한 전기공사 시방서 통합관리시스템 구축
왕용필(Yong-Peel Wang),안준호(Joon-Ho Ahn),한형주(Hyeong-Ju Han),김우호(Woo-Ho Kim),현소영(So-Young Hyun) 대한전기학회 2010 대한전기학회 학술대회 논문집 Vol.2010 No.4
In this paper, we suggest the work-section classification system of electrical construction based on the specification of DB. Also, a content of specification was applied to the same contents, fixed the specification code to the work-section. we developed an integrated management system that can solve the different specification writing method to each ordering organization.
일반용전력사용고객 용도별 부하특성을 고려한 변압기최대이용률 비교 특성 연구
왕용필(Yong-Peel Wang),홍현문(Hyun-Mun Hong),김세동(Se-Dong Kim) 한국조명·전기설비학회 2009 조명·전기설비학회논문지 Vol.23 No.12
계약전력 산정 방법에서 계약전력 환산율은 전력용변압기의 용량을 산정하는데 매우 중요한 기준이다. 본 연구에서는 AMR(자동검침시스템) 시스템에 의해 일반용전력사용고객(사무실, 상가, 호텔, 병원, 예식장, 기타)을 대상으로 각 수용가의 계약전력과 최근 5년 동안의 최대전력을 조사하였다. 조사된 자료의 전체 특징과 중심적인 경향을 알아 보기 위해서 평균값 등의 특징파라미터를 분석하였고, 회귀분석을 통한 선형적인 방법과 비선형적인 방법으로 그 경향을 분석하였다. 계약전력환산율과는 용도별로 다른 특성을 나타내고 있음을 확인하였으며, 전기사용고객의 특성을 고려한 계약종별 기준에 대한 체계적인 검토가 필요하다. This paper shows a reasonable contract power conversion factor, that was made by the systematic and statistical way considering actual conditions, such as investigated contract power and peak power for the last 5 years of each customer for 461 general customers as to AMR. In this dissertation, it is necessary to analyze the key features and general trend from the investigated data. It made an analysis of the feature parameters, such as average, standard deviation, median, maximum, minimun and thus it was carried by the linear and nonlinear regression analysis. Therefore, this paper compared characteristics for a contract power conversion factor which is applied to estimate contract power with characteristics for a regression model for customers(office, store, hotel, hospital, wedding hall) which maximum utilization factor of transformer is more than 60[%].
왕용필(Yong-Peel Wang),정종원(Jong-Won Jeong),김세동(Se-Dong Kim),곽노홍(No-Hong Kwak),전영수(Young-Soo Jeong),박상호(Sang-Ho Park) 한국조명·전기설비학회 2007 조명·전기설비학회논문지 Vol.21 No.10
최근 전력기기 및 전력시스템 기준이 수적인 면과 복잡성에 있어 증가되고 있다. 이에 부하의 왜곡에서 고조파 방출 한계를 평가하기 위한 우리나라 송전계통 기준을 소개하였다. 시간적 제약이 증가하는 조건아래 전력회사 실무자들은 빠르게 문제를 풀기 위하여 소프트웨어로 구성하기가 매우 복잡하다. 따라서 본 논문에서는 마이크로소프트 엑선을 이용하여 실무자들이 실제적인 상황에서 이러한 기준을 즉시 적용할 수 있도록 하기 위한 방법을 표현하였다. In recent years, power equipment and system standards have been increasing in both number and complexity. The standards that will soon be introouced to KOREA is the transmission system standards for harmonic emission limits assessing in distorting loads. Utility engineers, being under increasing time constraints, are turning more and more to software to quickly solve problems. This paper describes the methodology used to implement the above standards in Microsoft Excel in order to assist utility engineers to readily apply these standards in practical situations.