http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
지역좌표계 성과분석을 위한 네트워크 RTK측량 사이트 캘리브레이션 기능 적용 방안
신창수,최윤수,박문재,Shin, Chang Soo,Choi, Yun Soo,Park, Moon Jae 한국국토정보공사 공간정보연구원 2017 지적과 국토정보 Vol.47 No.1
The network RTK surveying has been widely used in the field of cadastral surveys in recent years, and its use is gradually expanding. As a result of the implementation of GPS static surveys by civilian companies in accordance with the progress of the cadastral surveys and gradual civilian transfer plans and cadastral surveys, there has been an increase in the number of civilian companies performing surveys. In this paper, we describe the process of applying the results of analysis of conformity using the network RTK site calibration function on the local coordinate system to the GPS static surveying of the cadastral reference points in Anyang city. In addition, the measurement results of the network RTK site calibration function and the results of the GPS static surveying network reconciliation in the local coordinate system were compared, and the performance was determined within 0.04m maximum of RMSE(Root Mean Square Error), and further study on the application method is needed. 최근 네트워크 RTK 측량은 지적측량분야에서도 많이 활용되는 등 그 사용 분야가 확대 되고 있다. 지적확정측량 점진적 민간이양계획 및 지적재조사측량 민간업체 낙찰에 따라 GPS정지측량의 민간업체 수행이 많아지고 있으며, 사업 적용 시 지역좌표계 기준점 성과의 상호간 불부합으로 인하여 이들 간의 부합을 점검할 수 있는 확인 방법의 필요성이 요구되고 있다. 본 연구에서는 안양시 지역의 지적기준점을 대상으로 지역좌표계상 네트워크 RTK 사이트 캘리브레이션 기능을 이용한 부합여부 분석결과를 GPS 정지측량에 반영하여 진행한 과정을 설명하고자 한다. 추가적으로 지역측지계상 GPS 정지측량 망 조정 성과와 네트워크 RTK 사이트 캘리브레이션 기능의 측량결과를 비교하여 측량결과의 RMSE(평균제곱근 오차)가 최대 0.04m 이내에서 성과가 결정되었고, 적용방법에 대한 추가적 연구를 통한 실무 활용이 필요하다 생각된다.
신창수,박문재,최윤수,백규영,김재명,Shin, Chang Soo,Park, Moon Jae,Choi, Yun Soo,Baek, kyu Yeong,Kim, Jaemyeong 한국국토정보공사 공간정보연구원 2018 지적과 국토정보 Vol.48 No.1
국가기본도 구축은 전국을 두 권역으로 나누어 2년 주기로 항공사진에 의한 수정도화를 실시하는 정시업무와 현지조사와 준공도면 등에 의하여 주요 변화 지형지물을 2주 이내에 수정하는 수시수정업무로 이루어지며, 이 중 국가기본도 수시수정 지형자료추출 업무에 활용되는 부동산종합공부시스템(일사편리) 건물배치도의 경우 지역측지계 기반의 좌표체계로 세계측지계 기반 국가기본도에 활용할 경우 좌표변환오차가 위치오차에 포함되는 문제점을 가지고 있다. 또한 국가기본도는 수치지형도 건물 등록선인 건물 최외곽선(처마선)을 기준으로 등록하고 있고, 지적 및 건축 분야는 건물 중심선을 기준으로 등록하고 있어 건물 객체 관리기준이 불일치하고 있다. 이에 개선방법연구를 위해 부동산종합공부시스템(일사편리)건물배치도 위치에 직접 네트워크 RTK 측량을 실시하여 국가기본도 평면 도화위치 기준과 비교하여 문제점을 분석하였다. 이중 벽체와 처마의 차이가 있는 일반건축물의 경우 위치정보가 상이한 것 이외에 벽체와 처마의 차이만큼 건물 객체 비율에 차이가 있었다. 결론적으로 부동산종합공부시스템(일사편리) 건물배치도를 수시수정업무에 활용하기 위해서는 건물 중심선과 건물 최외곽선(처마선)의 이중레이어의 기초자료 제공이 필요하다 판단된다. 또한, 최신성 및 정확성을 동시에 확보 가능한 유기적인 지도갱신 프로세스에 대한 연구가 필요하다. The National Base Map construction consists of the regular correction work of dividing the whole country into two regions and carrying out the modification Plotting by aerial photographs every two years as well as the real time updating work of correcting the major change feature within two weeks by the field survey and the As-Built Drawing. In the case of the Building Layout Drawing of Korea Real estate Administration intelligence System(KRAS) used for real time updating work of the National base map, the coordinate transformation error is included in the positional error when applied to the National Base Map based on the World Geodetic Reference System as the coordinate system based on the Regional Geodetic Reference System. In addition, National Base Map is registered based on the outline(eaves line) of the building in the Digital Topographic Map, and the Cadastral and Architecture are registered based on the building center line. Therefore, the Building Object management standard is inconsistent. In order to investigate the improvement method, the network RTK survey was conducted directly on a location of the Building Layout Drawing of Korea Real estate Administration intelligence System(KRAS) and the problems were analyzed by comparing with the plane plotting position reference in National Base Map. In the case of the general structure with the difference on the Building center line and the eaves line, beside the location information was different also the difference in the ratio of the building object was different between Building center line and the eave. In conclusion, it is necessary to provide the Base data of the double layer of the Building center line and the outline of the building(eaves line) in order to utilize the Building Layout Drawing of Korea Real estate Administration intelligence System(KRAS). In addition, it is necessary to study an organic map update process that can acquire the up-to-dateness and the accuracy at the same time.