http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
신성우 한국비파괴검사학회 2014 한국비파괴검사학회지 Vol.34 No.6
In this study, we examined the applicability of coda wave interferometry(CWI) technique, which was developed to characterize seismic waves, to detect and evaluate change in the velocity of ultrasonic waves in concrete due to acoustoelastic effect. Ultrasonic wave measurements and compressive loading tests were conducted on a concrete specimen. The measured wave signals were processed with CWI to detect and evaluate the relative velocity change with respect to the stress state of the specimen. A phase change due to the acoustoelastic effect of concrete was clearly detected in the late-arriving coda wave. This shows that the relative velocity change of ultrasonic waves in concrete due to the acoustoelastic effect can be evaluated successfully and precisely using CWI.
신성우,권구안,이종원,Shin, Sung-Woo,Kwon, Koo-Ahn,Lee, Jong-Won 대한건축학회 2011 대한건축학회논문집 Vol.27 No.7
The regions with newly organized meteorological observatory do not have sufficient amount of wind speed data for the extremal analysis, so it is difficult to estimate the Basic Wind Speed using the extremal analysis. Therefore, it is necessary to find a way how to estimate the Basic Wind Speed using the extremal analysis with a few amount of data. This study focuses on the estimation of the Bagic Wind Speed using the daily maximum wind speed data by utilizing the Davenport distribution based Bi-Weibull distribution.
전단-스팬비가 작은 고강도 철근콘크리트 보의 전단성능에 관한 실험적 연구
신성우,문정일,박희민,이승훈,오정근,임남재 한국콘크리트학회 1992 콘크리트학회지 Vol.4 No.4
본 연구에서는 전단-스팬비가 1.5에서 2.5 범위의 고강도 콘크리트 보에 대해 기존 규준식의 안전여부를 확인하고, 사균열강도와 극한전단강도를 결정하기 위해 총 15개의 시험체를 제작하여 실험적 연구를 수행하였다. 주요변수는 전단-스팬비(a/d=1.5, 2.0, 2,5)와 수직전단철근비(Rv=0, 25, 50, 75, 100%, Rv=[$ ho$v / $\rho$v(ACI)] 100)이며, 콘크리트 압축강도(f'c=747kg/$ extrm{cm}^2$와 인장철근비($\rho$w=0.0377)는 일정하다. 실험결과 본 연구의 전단-스팬비의 범위에서 ACI 318-89 (11-31)식은 일반적으로 수직전단철근에 의해 저항되는 전단강도를 상당히 과소평가하는 것으로 나타났다. 따라서 수직전단철근에 대한 영향이 재고되어야 할 것이다.
신성우,이광수,최명신,김현식,Shin, Sung-Woo,Lee, Kwang-Soo,Choi, Myung-Shin,Kim, Hyun-Sik 한국콘크리트학회 1999 콘크리트학회지 Vol.11 No.2
최근들어 그 필요성이 증대되고 있는 경량 콘크리트의 경우, 부착강도의 저하를 고려하여 ACI 규준에서는 부착길이 보정계수를 도입하여 안전율을 높이고 있으나, 경량 콘크리트가 고강도화됨에 따라 어느 정도 부착강도의 증징이 있을 것으로 판단된다. 따라서 ACI 규준에서 정하고 있는 경량 콘크리트에 대한 부착길이 보정계수 ${\lambda}$=1.3을 고강도 경량 콘크리트에 적용할 경우 그 적정성 여부에 대한 검토가 필요하다. 본 연구에서는 고강도 경량 콘크리트의 부착특성을 알아보기 위하여 콘크리트 압축강도, 피복두께, 철근직경, 부착길이 등을 변수로 하여 Pull-out 실험을 실시하였다. 실험결과 부착응력은 콘크리트 압축강도 제곱근과 피복두께가 증가함에 따라 증가하였고, 철근직경과 부칙길이가 증가함에 따라 감소하였으며, 파괴양상은 피복두께에 따라 쪼개짐 파괴와 뽑힘 파괴를 나타내었다. 고강도 경량 콘크리트의 부착응력을 보통중량 콘크리트보다는 큰 값을 나타낸다. 따라서 ACI 규준에서 정하고 있는 경량 콘크리트 부착길이 보정계수를 고강도 경량 콘크리트에 적용할 경우 경량 콘크리트의 고강도화에 따른 부착응력 상승효과를 고려하여 하향조정하여야 할 것으로 판단된다. 또한 피복두께 2.5$d_b$ 이상일 경우 적용하는 피복두께 보정계수 0.8은 고강도 경량 콘크리트에도 그대로 적용할 수 있음을 알 수 있다. Recently, it is increased the use of High-Strength Light-Weight Concrete(HLC) in the high-rise buildings and mega-structures. But there are a few research on the bond behavior of HLC, so it need to study about that. The present study was performed to investigate the bond characteristics of HLC. Major test variables include concrete compressive strength(f'c), concrete cover(c), bond length (${\ell}_{db}$), and bar diameter($d_b$). Test results indicate that the bond stress of HLC is increased with the increment of $\sqrt{f'_c}$ and concrete cover, bond stress is decreased with increment of bond length and bar diameter. And the final failure mode such as splitting or pullout failure is significantly affected by the concrete cover to bar diameter ratios(C/$d_b$). Test results were compared with ACI code and other proposed equations. The bond stress of HLC is higher than that of normal-strength normal-weight concrete, but lower than that of high-strength normal-weight concrte. Considering the present test results, modification factor(${\lambda}$= 1.3) of bond length in ACI 318-95 code for light-weight concrete is may have to be reviewed to apply to HLC.