http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
송예은,김보경,윤병욱,이두진 한국고분자학회 2021 한국고분자학회 학술대회 연구논문 초록집 Vol.46 No.2
Hydrogels are multi-functional materials having large amount of water and three-dimensional hydrophilic polymer networks. We used the TEMPO-treated cellulose nanofibrils (TEMPO-CNF), a kind of hydrogels, and metal salts such as (Fe(NO₃)₃, Al(NO₃)₃, Cu(NO₃)₂, Ca(NO₃)₂, Zn(NO₃)₂) solutions to induce metal-carboxylate coordination bonding, which could improve the mechanical strength of TEMPO-CNF. We confirmed the formation and behavior of M-TCNF. The behavior of M-TCNF analyze through the large amplitude oscillatory shear (LAOS) test and sequence of physical processes (SPP) analysis. These two methods can even know the nonlinear deformation behavior of the material. As a result, we could confirm that the stiffness and strength of the M-TCNF was significantly increased compared to TEMPO-CNF, and that different structural deformation occur according to the number of cations.
내피세포가 배양된 나노셀룰로오스 하이드로겔의 비선형 유변물성 분석
송예은,김민균,이희경,이두진,Song, Yeeun,Kim, Min-Gyun,Yi, Hee-Gyeong,Lee, Doojin 한국복합재료학회 2022 Composites research Vol.35 No.3
목재 섬유 기반의 셀룰로오스 나노피브릴(cellulose nanofibrils, CNF)은 생체적합특성이 우수하여 조직 공학용 스캐폴드, 약물 운반체, 상처 치유용 겔 등의 생체 의료 분야에서 많은 관심을 받고 있다. 하지만, 셀룰로오스 나노피브릴은 상대적으로 약한 기계적 강도를 나타내기 때문에 높은 기계적 특성을 요구하는 응용 분야에 사용되기 어렵다는 한계를 가지고 있다. 따라서 본 연구에서는 셀룰로오스 나노피브릴의 기계적 강도를 향상시키기 위해 TEMPO (2,2,6,6-tetramethylpiperidin-oxyl) 산화 처리된 셀룰로오스 나노피브릴에 금속 양이온을 도입하여 금속-카르복실레이트 배위 결합을 가지는 하이드로겔을 제조하였다. 또한, 큰 진폭 진동 전단(large amplitude oscillatory shear) 측정과 Live/Dead 세포 시험을 통해 하이드로겔의 비선형 점탄성 거동과 세포 생존 능력을 분석하였다. 특히, 첨가된 금속염의 종류에 따라 세포의 증식 및 생존 능력이 변화하였고, 이는 하이드로겔들의 유변 물성 특성에도 영향을 미쳤다.
폴리카보실란 전구체의 용매 처리에 따른 열적 및 유변학적 특성 분석
송예은,주영준,신동근,조광연,이두진 한국복합재료학회 2022 Composites research Vol.35 No.1
폴리카보실란은 탄화규소 섬유 방사와 세라믹 제조를 위해 필요한 중요한 전구체이며, 이 전구체는 제조 방법 및 공정에 따라 고내열성 및 내산화성 및 연속적인 탄화규소 섬유 생산 능력이 달라진다. 탄화규소 섬유는 폴리카보실란의 합성, 정제 및 분자구조제어기술, 그리고 이를 이용한 용융방사 및 안정화, 열처리 공정을 통해 제조된다. 본 논문에서는 폴리카보실란 전구체를 다양한 용매처리를 통하여 전구체 내에 존재하는 미반응물 및 저분자량의 정제효과를 파악하였으며, 또한 다양한 온도에서의 열처리에 따른 폴리카보실란 전구체의 중합 및 네트워크 재배열에 의한 변화에 대해 열적 분석을 실시하였다. 특히, 폴리카보실란 전구체의 유변물성 특성을 통해 용매처리 및 열처리에 따른 복합점도 및 구조적 배열의 변화를 분석하였다.
송예은 ( Song Ye-eun ),고준채 ( Ko Jun-chae ),유경진 ( Yu Gyeong-jin ),정재봉 ( Jung Jae-bong ),박현도 ( Park Hyun-do ) 미래융합통섭학회 2023 현대사회와 안전문화 Vol.6 No.1
연구목적 본 연구는 변사자로부터 채취한 혈액이 증거로서의 가치를 확인하고 채혈자 조사를 통하여 검안의사를 포함한 비의료인에 의한 채혈과 이때 수집된 증거물의 연계성에 대해 검토하고자 하였다. 연구방법 표본으로 선정된 2개의 시와 2개의 도에서 2017년 한 해 동안 SCAS에 입력된 변사사건 11,176건 중 변사자로부터 채혈한 사건은 455건(2.5%)으로 확인되었다. 결과 변사건수는 A 지역이 4,578건으로 가장 많았으며, 채혈건수는 B 지역이 172건으로 가장 많았다. 채혈이 이루어진 455건 중 검안의사에 의한 채혈이 330건으로(72%) 가장 많았으며, 경찰에 의한 채혈도 111건(25%)으로 나타났고, 이를 제외한 채혈은 14건(3%)이었다. 특히, D 지역은 1,875건의 변사사건 중 19건(1.0%)밖에 채혈이 이루어지지 않았으며, 연구표본 지역 중 가장 낮은 비율을 보였다. 이는 변사사건 현장에서 채혈을 해야 할 필요성을 인식하지 못하였거나 채혈을 기피하는 것으로 생각되며, 이후 현장에서 채혈이 필요한 경우가 발생하더라도 이를 외면할 가능성이 존재한다. 더욱이 변사사건에서 혈액은 사건의 중요한 단서가 될 수 있어 수집된 혈액을 자세하게 기록함으로서 증거물 연계성을 지켜야 할 것이다. 결론 검안의사는 의료행위에 대한 전문지식과 기술을 가지고 경찰의 요청에 의해 현장임장 및 검시를 하므로, 변사자로부터 채혈을 진행함에 법적으로 문제가 되지 않는다고 생각된다. 그러나 검시조사관 또는 과학수사요원은 감식과 분석 임무를 수행하고 있지만, 채혈에 대한 자격이나 권한은 없다. 따라서 채혈에 대한 증거물 연계성을 높이기 위해서는 검안의사를 확충하여 그들에 의해 채혈이 이루어질 수 있도록 해야 할 것이다. 하지만 검안의사가 임장할 수 없는 경우가 발생할 수 있으므로 검시조사관 또는 과학수사요원의 채혈에 대해 법적 뒷받침을 마련하고 이에 대한 교육이 필요하다고 생각된다. PURPOSE The purpose of this study is to confirm the value of blood collected as proof and review the relationship between the blood collecting by non-medical personnel and the evidence collected through the blood sampler investigation. METHOD Among the 11,176 incident cases put into the SCAS during the year 2017, 455 cases (2.5%) were identified to be from unnatural death in the two selected cities and two provinces for the year 2017. RESULT The number of the unnatural death was the highest in A area (4,578 cases) while the number of blood collection was the highest in B area (172 cases). Among the 455 cases of blood collection, 330 cases (72%) were collected by postmortem doctor, and 111 cases (25%) were collected by the police and the others were 14 cases(3%). In particular, in the D region, only 19 out of 1,875 cases (1.0%) accompanied blood collection, showing the lowest rate among the study sample areas. This is because there was no recognition that there is a need to collect blood at the scene of a criminal case or people avoided blood collection. Therefore there is a possibility that notwithstanding a need to collect blood in the field, it may be ignored. Moreover, in the case of unnatural death, blood can be an important clue, and the evidence linkage should be protected by recording the detail of collected blood. CONCLUSION since postmortem doctor has expert knowledge and skills on medical practice and performs on-site examination and autopsy at the request of the police, it is not legally problematic to conduct blood collection from unnatural death. However, although the coroner or scientific investigator performs the identification and analysis but does not have the qualification or authority to collect blood. Therefore, in order to increase the linkage of evidence for blood collection, it is necessary to increase the number of postmortem doctor so that blood collection can be done by them. However, since postmortem doctor may not be able to attend, it is necessary to provide legal support for the blood sampling by the coroner or scientific investigator.
차량용 시트 조정 변수에 따른 운전자의 요추 모멘트 비교
송예은(Ye Eun Song),김동현(Dong Hyun Kim),김성국(Seong Guk Kim),조영근(Young-Kuen Cho),김성래(Sung Rae Kim),이인주(In Ju Lee),김형주(Hyung Joo Kim),김한성(Han Sung Kim) 한국자동차공학회 2016 한국자동차공학회 부문종합 학술대회 Vol.2016 No.5
Posture at the driver-seat interface has been used as an typical method to assess seat comfort. The driver can control seat conditions, such as height of seat, degree of seat back, and a lumbar support. This study conducted an experiment to the comparison of lumbar moment of drivers and seat condition. The lumbar moment of participants were calculated to the percentage based on ‘94 degree of seat back, high seat pan, without lumbar moment’. The highest moment is ‘94 degree of seat back, low seat pan, without lumbar moment’ and lowest moment is ‘109 degree of seat back, low seat pan, with lumbar moment’. And as the degree of seat back increase with lumbar support, the lumbar moment is lower than the others. Hence, it is supposed that the lumbar moment have relevance to the driving comfort.