http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
수정소성힌지해석을 이용한 강접합 골조와 반당접합 골조의 비교
손성용,이상섭,문태섭,Son, Seong Yong,Lee, Sang Sup,Moon, Tae Sup 한국강구조학회 2001 韓國鋼構造學會 論文集 Vol.13 No.5
철골조의 비탄성 거동을 해석하는데 있어 많은 고차해석법이 소개되고 있다. 이 해석법들은 부재의 불완전성과 잔류응력과 같은 재료적인 비선형성 그리고 기하학적 비선형성에 의한 2차 효과를 직접 해석과정에 반영하여 골조의 거동을 좀더 정확히 예측할 수 있다. 이 가운데 비교적 간편하면서도 정확성이 높은 수정소성힌지 해석법을 도입하고 반강접합부의 모델링을 위해 이미 개발하여 제안한 로그 모델을 적용 해석프로그램(RPH-2DF)을 작성하였다. 이 프로그램의 검증을 위해 두께 중복형 접합부를 갖는 골조실험 결과와 해석 결과를 비교하였다. 또한 강접 골조의 거동과 반강 접합부를 갖는 골조의 거동 차이를 규명하기 위해 MIDAS-GEN v4.2.2로 설계된 10층 가새 골조를 대상으로 RPH-2DF를 이용한 해석결과와 비교하였다. A refined method of analysis which is called the Advanced Analysis has been introduced This method is to consider the intial member imperfection residual stress and second-order effects so as to estimate the overall behavior of steel frame accurately Based on the refined plastic hinge method that is more suitable and practical in design practice. the program RPH-2DF is coded using the log model which represents the moment-rotation relationship of connection. The validity of this program is examined by frame test data. Finally to investigate the difference between behaviors of rigid and semi-rigid frame. the 10-story frame analysis results designed by MIDAS-GEN v4.2.2 are compared with the results by RPH-2DF.
교류배전시스템과 직류배전시스템이 적용된 IDC 전력효율 비교연구
손성용(Sung-Yong Son),목형수(Hyung-Soo Mok),박경석(Kyung-Seok Park),홍준희(Jun-Hee Hong) 한국조명·전기설비학회 2008 조명·전기설비학회논문지 Vol.22 No.8
급격한 IT 산업 발전의 산물인 인터넷데이터센터(IDC)는 서버 시스템이 집적된 고밀도 디지털 부하로 구성되는 특징을 가지고 있다. IDC의 디지털 부하 특성을 고려하여 직류배전시스템을 도입하는 경우 전력 변환 체계의 단순화로 효율 향상의 가능성이 일부 제기되어 왔으나, 국내 IDC 환경에서의 효율성이 검증된 사례는 없었다. 본 논문에서는 교류배전방식을 적용한 KT 분당 IDC와 직류배전방식을 적용한 KT 남수원 IDC의 전력 효율을 비교 분석함으로써 국내 IDC 배전체계의 직류화에 따른 효율 개선 효과를 제시하였다. DC 48[V]를 배전하였을 때 직류배전 방식의 효율이 13.2[%] 높은 것으로 도출되었으며, DC 380[V]의 공급을 가정하였을 때에는 25[%] 이상의 효율 향상을 기대할 수 있었다. Internet Data Centers (IDCs), which are resulted by the rapid progress of Information Technology industry, consist of high-density digital loads with internet server systems. Introduction of DC distribution system may simplify the conventional electric power conversion system, and may result in the improvement of electric power efficiency. However, this conjecture has never been tested under Korean IDC environment. In this study, electric power efficiency of DC distribution system from KT Namsuwon IDC is contrasted with that of conventional AC distribution system from KT Bundang IDC. DC 48[V] based distribution system showed 13.2[%] higher efficiency than the conventional AC based distribution system. The further analysis with the assumption of DC 380[V] suggests efficiency improvement over 25[%] can be achieved.
레거시 기기 통합 제어를 위한 효율적 Zigbee Bridge 개발
이승민,손성용,Lee, Seung-Min,Son, Sung-Yong 한국정보통신학회 2010 한국정보통신학회논문지 Vol.14 No.9
가정에서 사용중인 가전제품을 제어하는 방법은 적외선 리모컨을 이용한 방식이 대부분을 차지하고 있다. 이러한 레거시 기기들은 각각의 리모컨으로 제어되고 있고 표준화된 통신방식을 제공하지 않아 원격 제어에 어려움이 있다. 통합 리모컨방식의 원격 제어기를 이용할 경우 여러 종류의 기기를 제어할 수 있지만 모든 명령을 지원하지는 않으며, 특히 새로운 명령이나 고유한 명령을 가진 제품이 출시될 경우 확장성에 한계가 있다. 본 논문에서는 레거시 기기의 효율적인 통합 제어를 위해 지그비로 전송되는 명령을 해당 기기의 적외선 제어 명령으로 변환하여 발신하는 Zigbee Bridge를 개발하고, 헤더 판별법을 이용한 학습 기능을 추가 하였다. 새로운 명령이 전송되는 경우 Bridge는 이 명령을 학습하여 저장하며, 기존 명령이 전송되는 경우 저장된 코드를 출력하는 방식을 사용하였다. 이 방식을 사용하는 경우 신규 명령에 대한 확장성과 유연성을 확보 할 수 있으며, 코드 전송의 효율을 향상하여 기존 대비 최대 58.6배 빠른 전송이 가능하다. IR remote control is the most common way to control home appliances nowadays. Each legacy device is controlled with their own remote controller, and it is not standardized yet. Although it is possible to handle multiple devices with a integrated remote controller, not all the devices and command sets are supported. There are also limitations in expandability especially when new or special command sets are required. In this paper, a efficient zigbee bridge which transforms a command set sent via zigbee to IR comment set is developed. The bridge also has a learning function based on a header comparison method. When a new command is sent, the bridge learn the new code. When a existing code is sent, the bridge dispatches applicable IR command to the appliance. With this approach, it is possible to obtain expandability and flexibility for new commands, and increase the communication efficiency up to 56.8 times.
FRTU 시뮬레이터를 이용한 차세대 배전지능화시스템 네트워크 성능검증
여상욱(Sang-Uk Yeo),손성용(Sung-Yong Son) 한국정보전자통신기술학회 2020 한국정보전자통신기술학회논문지 Vol.13 No.6
배전선로계통의 효율적인 관리와 운영을 위해서 배전지능화시스템은 필수적이다. 배전지능화시스템은 IT를 기반으로 배전망을 통합관리하는 시스템으로 전력산업의 발전과 더불어 진화해 오고 있다. 현재의 배전지능화시스템은 주장치 단위의 독립운전을 기준으로 상대적으로 낮은 네트워크 전송속도로 운영되도록 설계되어있다. 하지만 최근 급속히 보급이 증가하고 있는 태양광이나 에너지 저장장치와 같은 분산자원으로 인하여 미래 배전환경의 운영은 보다 복잡해 지고 있으며 다양한 정보의 실시간 수집이 필요하다. 본 연구에서는 기존의 배전지능화의 한계를 극복하기 위해 차세대 배전지능화시스템의 요구사항을 도출하였으며, 이를 기반으로 배전계통에 필요한 통신네트워크 체계와 성능요건을 정의하였다. 배전지능화시스템과 같은 대규모 시스템의 현장 도입에는 과도한 시간과 비용이 소요되므로 설계된 시스템의 성능 검증을 위하여 소프트웨어 기반의 단말장치 시뮬레이터를 개발하였다. 시뮬레이터를 활용하여 실제 운영과 유사한 시험환경을 구축하고, 단말장치를 1,000대 까지 증가시켰을 때 제시된 시스템의 네트워크 점유는 최대 10% 이하로 차세대 배전지능화시스템의 기능을 지원하기 위한 네트워크 요구사항을 충족함을 보였다. Power distribution management system is essential for the efficient management and operation of power distribution networks. The power distribution system is a system that manages the distribution network based on IT, and has been evolving along with the development of the power industry. The current power distribution system is designed to operate at a relatively low network transmission speed based on the independent operation of the main equipment. However, due to distributed resources such as photovoltaic or energy storage devices, which are rapidly increasing in popularity in recent years, the operation of future distribution environments is becoming more complex, and various information needs to be collected in real time. In this study, the requirements of the next-generation power distribution system were derived to overcome the limitations of the existing power distribution system, and based on this, the communication network system and performance requirements for the distribution system were defined. In order to verify the performance of the designed system, a software-based terminal device simulator was developed because it takes excessive time and cost to introduce a large-scale system such as a power distribution system. Using the simulator, a test environment similar to the actual operation was established, and the number of terminal devices was increased up to 1,000. The proposed system was shown to satisfy the requirements to support the functions of the next-generation power distribution system, recording less than 10 % of the communication network bandwidth.