http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
오버행과 스큐 구조를 가지는 영구자석 직류전동기의 2차원 유한요소해석 방법 및 최적 설계
정태욱(Tae-Uk Jung),서정랑(Jung-Rang Seo),이강원(Kang-Won Lee) 한국조명·전기설비학회 2018 조명·전기설비학회논문지 Vol.32 No.4
Permanent magnet DC motors are gradually being replaced by other motors due to the durability limitation of driving method through mechanical rectification, but they are still widely used for simple control methods and so on. In order to improve the driving performance of the permanent magnet DC motor, an overhang structure and a skew structure are mainly applied. In order to analyze the performance through a finite element analysis in consideration of the three-dimensional structure, it is inevitable to use the three-dimensional model and it takes a long time compared to the two-dimensional model. In this paper, we propose a method to reflect the overhang structure and the skew structure in the two - dimensional analysis model. In order to verify the validity of the proposed method, we compared the results of the analysis of the proposed model with the 3D model. In order to improve the performance of the permanent magnet DC motor, the design parameters were selected and optimized through the proposed model.
3kW급 소형 풍력발전용 이중고정자형 발전기의 코깅토크 저감을 위한 고정자 치조합 설계
곽명준(Myeong-Jun Gwak),서정랑(Jung-Rang Seo),정태욱(Tae-Uk Jung) 한국조명·전기설비학회 2019 조명·전기설비학회논문지 Vol.33 No.12
Dual stator type generators have excellent output per unit volume and can generate high efficiency in a wide operating range based on high voltage at low wind speed. The dual stator type generator can minimize the cogging torque generated by the two inner and outer generators through the mutual displacement of the stator or the permanent magnet. However, this method has a disadvantage of lowering the output and efficiency of the generator. Therefore, this paper presents a design method applying stator teeth pairing to reduce cogging torque of dual stator type generators. The proposed method is to design the width of inner stator teeth and the width of outer stator teeth to be different from each other. To verify the validity of this paper, we present the results of 2D finite element analysis and verify the validity of this paper.
PEMFC 단위 셀의 제작 및 저전압ㆍ저전력 시스템 설계에 관한 연구
류윤심(Yun-Sim Ryu),안호균(Ho Gyun Ahn),서정랑(Jung Rang Seo),김성훈(Sung Hoon Kim),이창호(Chang Ho Lee) 전력전자학회 2007 전력전자학술대회 논문집 Vol.- No.-
These days, to change the new & renewable energy change the subject because environmental pollution and exhausted fossil power. The most notable Fuel cells by one of the new & renewable energies are one of very useful power conversion sources. Their advantages are low environmental pollution, highly efficient power generation, diversity of fuels (natural gas, LPG, methanol and naphtha), and reusability of exhaust heat, modularity, and faster installation. PEMFC by one of the Fuel Cells is the energy of new technology which is produced by the electric chemical reaction directly. The essential composition elements of PEMFC stack are membrane electrode assembly (MEA), catalyst, Bipolar Plate. Under the this study, know-how is manufacturing single cell of PEMFC and Study design of Low Voltage, Low Electric Power System by PEMFC Single Cell.
소형 BLDC MOTOR의 SENSORLESS 기동방법에 관한 연구
노승모(Seung Mo Noh),박승규(Seung Kyu Park),윤태성(Tae Sung Yoon),안호균(Ho Kyun Ahn),서정랑(Jung Rang Seo) 대한전기학회 2006 대한전기학회 학술대회 논문집 Vol.2006 No.7
BLDC 전동기는 AC서보 일종으로 스위칭 소자를 이용한 인버터 회로를 통해 정류하므로 정류 시 회전자의 위치 정보를 회전자에 홀센서나 레졸버와 같은 위치 센서를 부착하여 위치 정보를 얻는다. 위치 센서는 전동기 가격 및 크기를 증가시키고 구조를 복잡하게 만들기에 위치 검출 센서 없이 구동하는 센서리스 구동 방법이 최근 많이 연구되고 있다. 센서리스 구동 방법에 가장 많이 쓰는 방법이 역기전력을 이용하는 것이다. 역기전력을 이용하는 경우 전동기가 고속으로 회전 시 비교적 잘 적용되지만 정지 상태에 있거나 저속에서 운전 시, 역기전력이 충분히 크지 않을 경우 적용이 어려운 단점이 있다. 본 논문에서는 BLDC 전동기의 3상 중 2상의 단자전압을 이용하여 센서리스 구동 방법을 제안한다. 정지 상태에서의 회전자 위치 파악은 DC링크 단에 전류 센서를 사용하여 초기 위치를 파악하고 한상의 단자전압을 검출하여 각 상의 여자 시점을 결정하여 초기 구동함으로써 기존의 다른 센서리스 회로의 간략화와 효율적이고 구현이 간단하며 무엇보다 가격전인 측면에서 여타의 방법에 비해 유리하다.
구면 간섭계를 이용한 소형 비구면 렌즈 검사 방법에 관한 연구
장남영(Nam-Young Jang),박광희(Kwang-Hee Park),송희영(Hui-Young Song),최평석(Pyung-Suk Choi),은재정(Jae-Jeong Eun),서정랑(Jung-Rang Seo) 대한전기학회 2009 대한전기학회 학술대회 논문집 Vol.2009 No.7
본 논문에서는 구면 렌즈 검사를 위해 제작된 Fizeau형 위상 천이 간섭계(Fizeau-type Phase Shifting Interferometer : FPSI)에 비구면 해석 알고리즘을 적용한 소형 비구면 렌즈 해석 방법을 제안한다. 또한 본 논문에서 제안한 방법의 측정 결과와 기존 비구면 검사 시스템의 측정 결과를 비교하여 그 성능을 평가한다.