http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
서무홍,이제훈,김정오,한유희 한국레이저가공학회 1999 학술발표대회 Vol.1999 No.1
1. 레이저 빔 이동속도 감소와 분말공급량의 증가는 희석율을 감소시켜 클래드 층에서의 r Ni 및 Cr 농도가 증가하여 경도값이 증가하게 된다. 2. Single clad track 실험결과 분말밀도가 증가함에 따라 기공, 균열, 불연속적인 클래드 층형성되는 임계 분말밀도값이 존재하며, 클래드 층과 모재와의 접촉각이 130℃이상, w/h ratio가 4이하일 때 불건전한 클래드 층이 형성되어지는 것으로 나타났다. 3. 표면거칠기(Turbulence)는 중첩비 증가에 따라 계속해서 감소하는 것이 아니라 진동하는 방법으로 감소한다. 4. 중첩실험시 임계중첩비 이상에서 내부기공과 균열등 결함이 발생한다.
서무홍,이제훈,한유희 한국레이저가공학회 1998 학술발표대회 Vol.1998 No.2
1. 분말 공급량이 증가함에 따라 희석율은 감소하였다. 이는 분말의 밀도가 높아짐에 따라 빔 에너지가 분말에 흡수되는 양이 증가하기 때문인 것으로 사료된다. 2. 레이저 빔 조사속도가 증가함에 따라 희석율도 증가하였다. 이는 단위, 길이당 입열되는 에너지 밀도와 분말 밀도가 동시에 감소하나 상대적으로 모재에 흡수되는 에너지 량이 증가하여 희석율이 증가하고 동시에 clad 층의 높이가 감소하는 결과를 나타내었다. 3. Clad층의 접촉각이 135°이상 w/h ratio가 5이하일 때 불건전한 clad층이 형성되어지는 것으로 나타났다. 4. 희석율이 증가할수록 경도는 감소하였다. 이는 모재의 성분 함량이 증가할수록 상대적으로 고용강화 원소인 Ni함량이 감소한 것이 원인인 것으로 사료된다.
논문 : 부식환경 ; 질소첨가 Type 316L 스테인리스강의 입계석출 및 예민화특성에 미치는 냉간가공의 영향
서무홍 ( Moo Hong Seo ),오용준 ( Yong Jun Oh ),유우석 ( Woo Seog Ryu ),천병선 ( Byong Sun Chun ),홍준화 ( Jun Hwa Hong ) 대한금속재료학회 ( 구 대한금속학회 ) 1998 대한금속·재료학회지 Vol.36 No.6
The precipitaion and sensitization behavior of nitrogen added Type 316L stainless steels(SS) were investigated by using specimens cold worked for 0~40%. The alloys had a variation in nitrogen content from 0.04 to 0.15%. To quantify the degree of sensitization double-loop electrochemical potentiokinetic reactivation (DL-EPR test was performed in a 0.1M H2SO4 + 0.01M KSCN solution at 30℃. The addition of nitrogen increased sensitization resistance by retarding the onset of M23C6 precipitation and shifted Time-Temperature-Sensitization (TTS) curve to higher temperature and longer time range. Cold work accelerated the M23C6, precipitation and sensitization kinetic due to the increase in dislocation density. However, the acceleration of sensitization was found to depend on the added nitrogen content in the alloys. The alloys with high nitrogen(>0.1%N) content exhibited higher accelation of the sensitization as a function of the cold work than that with low nitrogen content. From the microstructural analysis, this was found to he attributed to the development of intensive slip bands during cold work and retardation of dislocation annihilation during subsequent aging in the alloys with high nitrogen content.