http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
변진규,이애경 한국전자파학회 2006 전자파기술 Vol.17 No.4
전자파 인체 노출 기준과 관련된 대표적인 국제표준은 IEEE ICES(International Committee on Electromagnetic Safety) 산하 TC95에서 제정한 IEEE C95.1 표준과 ICNIRP(International Commission on Non-Ionizing Radiation Protection)에서 제정한 ICNIRP guideline이 있다. 본 고에서는 이 국제 표준들을 간략하게 소개하면서 각각의 차이점을 비교하고, 최근의 개정 동향과 조화(harmonization)를 위한 노력에 대해 기술한다.
중간주파수 대역에서 준정적(Quasi-Static) FDTD 기법을 이용한 인체 유도전류 분석
변진규(Jin-Kyu Byun) 한국조명·전기설비학회 2009 조명·전기설비학회논문지 Vol.23 No.1
본 논문에서는 준정적 FDTD 기법을 FORTRAN 프로그래밍을 통해 직접 구현하고 이를 이용해 중간주파수 대역의 인체유도전류 분포를 해석하였다. 제작된 프로그램의 타당성을 검증하기 위하여 기존 FDTD 기법을 적용하기 어려운 테스트 모델에 대한 계산결과를 이론적 해와 비교하고, 타임스텝이 크게(5.68×10?배) 단축되는 것을 확인하였다. 검증된 수치해석 기법을 이용하여 20[㎑] 자기장과 1[㎒] 전기장에 노출된 3차원 고해상도 인체모델에 유기되는 유도전류의 분포를 계산하고 양 발의 접지조건이 유도전류의 분포와 크기에 미치는 영향을 분석하였다. 본 연구는 인체유도전류의 안전성 평가 생체전기 응용 진단장치 개발 등을 포함한 다양한 분야에서 활용될 것으로 기대된다. In this paper, quasi-static FDTD method is implemented by FORTRAN programming, and it is used for analysis of body induced current in middle frequencies. The quasi-static FDTD program is validated by comparing the calculation result with analytic solution of the test model, to which it is difficult to apply conventional FDTD. It is confirmed that the time-step is reduced by 5.68×10? times. Using validated numerical technique, body induced current distribution in high resolution 3-D human model is calculated for 20[㎑] magnetic field exposure and 1[㎒] electric field exposure, Also, the effect of grounding condition of both feet on the distribution and amplitude of the induced current is analyzed. It is expected that this research can be applied to various fields including safety assessment of body induced current and development of diagnosis devices using bio-electricity.
UHF 대역 RFID 시스템에서 전자기장의 인체노출량 측정 및 분석
변진규(Jin-Kyu Byun),윤재훈(Jae-hun Yun) 한국조명·전기설비학회 2009 조명·전기설비학회논문지 Vol.23 No.1
UHF 대역 RFID 시스템의 전자기장 인체노출량 평가를 위하여 900[㎒] 대역 상용 RFID 시스템에 대하여 전기장 분포를 실측하고 분석했다. 또한 RFID 리더 안테나의 전자파흡수율(SAR)을 시뮬레이션을 이용하여 계산하고 인체보호기준에 명시된 기본한계와 비교하여 안전성을 확인했다. EN 및 IEC 국제표준에 따라 RFID 시스템 주위의 인체노출량을 평가하기 위하여 리더기 동작을 테스트하고, 안테나로부터의 땅위각과 거리에 따른 전기장 강도를 측정 후 그 결과를 분석하였다. 계측기로는 협대역 등방성 전기장 프로브를 사용하였으며, 리더기 주변 360[˚] 범위에서 15[˚] 간격으로 각각 0.3, 0.5, 1.0, 1.5[m]의 거리에서 측정을 수행했다. 또한 측정 결과로부터 EN 및 IEC 표준에서 정의된 측정거리의 타당성에 대해 분석했다. For human exposure assessment of UHF RFID system, electric field distribution of commercial 900[㎒] RFID antenna was measured and analyzed. Also, SAR(Specific Absorption Rate) of RFID antenna was calculated by simulation, and compared with basic restrictions in EMF guidelines. For EMF exposure assessment according to EN and IEC standards, the reader was tested for the normal operation, and electric field from RFID antenna was measured at various distances and angles. For electric field measurement, narrow band isotropic electric field probe was used, and the measurements were made at 0.3, 0.5, 1.0 and 1.5[m] for every 15[˚] angle from the antenna. Also, the rationale for measurement distance in EN and IEC standards is analyzed from the measurement results.