산업부산물의 사용성 확대를 위한 기초연구: 숏크리트의 강도특성

박철우,권승준,심종성,강태성,이현기,심재원,Park, Cheol-Woo,Kwon, Seung-Joon,Sim, Jong-Sung,Kang, Tae-Sung,Lee, Hyeon-Gi,Sim, Jae-Won 한국건설순환자원학회 2009 한국건설순환자원학회지 Vol.4 No.3

The industrial by-products market has increased at a geometric rate worldwide with the rapid economic growth. Among the wide variety of industrial by-products, fly ash which is generated by the combustion of coal is one of the more troublesome industrial wastes because they entail substantial disposal cost and also cause a shortage of disposal sites. In Korea alone, fly ash generation is expected to increase to 5.8 million tons by 2009, and to 6 million tons by 2010. Given the accelerated industrial development in developing countries, the amount of fly ash generation is predicted to reach enormous levels throughout the world. An increasing number of studies have currently focused on the feasibility of recycling industrial wastes i.e., fly ash in terms of environmental advantages. In this study, the optimized mix proportion of high performance shotcrete using fly ash was determined for the purpose of promoting recycling and reuse of resources. 최근 국제적으로 급속한 경제성장으로 인한 산업부산물이 기하급수적으로 늘어가고 있다. 산업부산물중 석탄의 연소과정에서 발생하는 폐석탄회는 산업폐기물로서 막대한 처리비용과 함께 매립장 부족 등 여러 가지 많은 문제점을 발생 시키고 있다. 한국의 경우 2009년에는 580만톤 2010년 이후에는 600만톤 으로 증가될 것으로 전망되고 있으며, 개발도상국의 선진화에 따른 폐석탄회 발생량은 세계적으로 볼 때 엄청난 양이 발생될 것으로 전망 된다. 이에 따라 세계적으로 산업폐기물 재활용 및 환경을 고려한 폐석탄회를 재활용 연구가 활발히 진행되고 있으며, 이 연구에서도 자원재활용을 목적으로 폐석탄회를 이용한 고성능 숏크리트용 최적 배합비를 도출하고자 한다.

생태계교란 생물 미국가재(Procambarus clarkii)의 국내 서식과 분포 연구

박철우,김종욱,조윤정,김재구,이민지,김수환,Park, Cheol Woo,Kim, Jong Wook,Cho, Yun Jeong,Kim, Jae Goo,Lee, Min Ji,Kim, Su Hwan 한국하천호수학회 2020 생태와 환경 Vol.53 No.4

미국가재는 멕시코 북동부 및 미국 중남부가 원산지로, 전 세계에 유입되어 서식처 파괴와 토착종과의 경쟁 등 많은 문제를 야기하고 있다. 본 조사에서 영산강 6개 지점, 만경강 5개 지점, 섬진강 2개 지점 금강 1개 지점에서 확인되었으며, 주요 수계에서 정착 서식하는 것으로 나타났다. 완주군 서봉리와 함평군 모산리는 20개체 이상이 확인되어 비교적 큰 개체군을 형성하고 있을 것으로 추정된다. 높은 이동성과 환경적응력으로 보아 확인된 지점에서 타수계로의 유입 가능성이 매우 높을 것으로 생각되며, 이에 지속적인 확산 현황 파악과 생태계 피해 예방을 위한 지속적 제거 노력이 필요하다. The red swamp crawfish (Procambarus clarkii) is native to northeastern Mexico and south-central United States. But the species has been introduced to other parts of the world, and cause ecological problems including habitat destruction and competition with indigenous species. In this study, we identified the distribution of P. clarkii in the freshwater system in Korea. P. clarkii were collected in the field sampling and it is assumed that they have settled in major domestic water systems of Korea including six points in the Yeongsangang River, five points in the Mangyeonggang River, two points in the Seomjingang River, and one point in the Geumgang River. In particular, more than 20 individuals were found in Seobongri, Wanjugun and Mosanri, Hampyeonggun, which are believed to form a relatively large population. Considering high mobility and environmental adaptability of the species, the possibility of their dispersal to other water systems is very high. Therefore, continuous monitoring and assessment of their distribution and potential spread are required and effective management to remove them policy is needed to prevent damage in the Korean ecosystem.

3단 구성의 디지털 DLL 회로

박철우,강진구,Park, Chul-Woo,Kang, Jin-Ku 한국전기전자학회 2002 전기전자학회논문지 Vol.6 No.1

본 논문에서는 전부 디지털 회로로 구성된 고 해상도의 DLL(Delay Locked Loop)를 제안하였다. 제안된 회로는 위상 검출기, 지연 선택 블록, 그리고 각각의 지연 체인을 가지는 Coarse, Fine 그리고 Ultra Fine 위상조정 블록의 삼 단의 형식으로 되어 있다. 첫 번째 단은 Ultra Fine 위상조정블록으로 고 해상도를 얻기 위하여 Vernier Delay Line을 사용하였다. 두 번째와 세 번째 단은 Coarse와 Fine 위상조정블록으로 각각의 단위 지연 체인을 이루는 단위 지연 소자의 해상도 만큼의 위상 제어를 하게 되며, 두 단은 상당히 비슷한 구조를 이루고 있다. 회로는 HSPICE를 이용하여 공급 전압이 3.3V인 $0.35{\mu}m$ CMOS 공정으로 시뮬레이션 되었다. 시뮬레이션 결과 회로의 해상도를 약 10ps로 높일 수 있었으며, 동작 범위는 250MHz에서 800MHz 이다. This paper describes a high resolution DLL(Delay Locked Loop) using all digital circuits. The proposed architecture is based on the three stage of coarse, fine and ultra fine phase tuning block which has a phase detector, selection block and delay line respectively. The first stage, the ultra fine phase tuning block, is tune to accomplish high resolution using a vernier delay line. The second and third stage, the coarse and fine tuning block, are tuning the phase margin of Unit Delay using the delay line and are similar to each other. It was simulated in 0.35um CMOS technology under 3.3V supply using HSPICE simulator. The simulation result shows the phase resolution can be down to lops with the operating range of 250MHz to 800MHz.

하악 편측 유리단 가철성 국소의치의 설계에 따른 광탄성 응력 분석

박철우,계기성,Park, Cheol-Woo,Kay, Kee-Sung 대한치과보철학회 2009 대한치과보철학회지 Vol.47 No.2

연구목적: 하악 우측 제1, 2 대구치가 결손된 Kennedy 분류 II급 증례에서 임상적으로 적용할 수 있는 편측 유리단 가철성 국소의치의 종류에 따른 응력 분포 양상을 비교하는 것이다. 연구 재료 및 방법: Kennedy 분류 II급 증례의 광탄성 모형에서 클라스프를 이용한 국소의치, 코너스 치관을 이용한 국소의치, 완압형 어태치먼트를 이용한 국소의치, 탄성 레진을 이용한 국소의치를 편측성으로 제작하였다. 응력 동결로에서 응력 주기에 맞춰 각 국소의치의 제1 대구치 중심와에 6 kg의 수직하중을 가하면서 응력을 동결하였다. 광탄성 모형을 절단하여 만든 시편을 광탄성 실험 장치로 광탄성 등색선의 흑백 무늬를 관찰하고 디지털 카메라로 촬영하였다. 촬영된 사진에서 8개의 측정점을 정하여 육안으로 무늬차수를 계측하고 비교하였다. 결과: 각 절단 시편의 최대 무늬차수와 하중점 직하방의 잔존 치조제에 발생한 무늬차수는 탄성 레진을 이용한 국소의치, 클라스프를 이용한 국소의치, 완압형 어태치먼트를 이용한 국소의치, 코너스 치관을 이용한 국소의치 순으로 높게 관찰되었다. 제2 소구치 치근단에 발생한 무늬차수는 클라스프를 이용한 국소의치, 탄성 레진을 이용한 국소의치, 코너스 치관을 이용한 국소의치, 완압형 어태치먼트를 이용한 국소의치 순으로 높게 관찰되었다. 결론: 코너스 치관을 이용한 국소의치가 수직하중시 지대치 주위 치조골과 잔존 치조제에 대하여 응력을 가장 균형있게 분산시켰고, 탄성 레진을 이용한 국소의치는 지대치보다 잔존 치조제의 상태가 더 양호한 경우에 적용 가능할 것이다. Statement of problem: There are common clinical cases in which the mandibular first and second molars are missing unilaterally. Purpose: This study was designed to compare and evaluate the magnitude and distribution of stress produced by four kinds of mandibular unilateral free-end removable partial dentures that could be applied clinically in Kennedy class II cases. Material and methods: Four unilateral free-end removable partial dentures using clasp, Konus crown, resilient attachment, and flexible resin were fabricated on the photoelastic models of the Kennedy class II cases. The vertical load of 6㎏ was applied on the central fossa of the first molar of every removable partial denture in the stress freezing furnace and the photoelastic models were frozen according to the stress freezing cycle. After these models were sliced mesio-distally to a thickness of 6mm, the photoelastic isochromatic white and black lines of the sliced specimens were examined with the transparent photoelastic experiment device and photographs were taken with a digital camera. The fringe order numbers at eight measuring points in the photograph were measured with the naked eye. Results: The maximum fringe order number of each sliced specimen and the fringe order number at the residual ridge just below the loading point were in the decreasing order of the unilateral removable partial dentures using flexible resin followed by clasp, resilient attachment, and Konus crown. The fringe order number at the root apex of the second premolar was in the decreasing order of the unilateral removable partial dentures using clasp followed by flexible resin, Konus crown, and resilient attachment. Conclusion: The removable partial denture using Konus crown showed the most equalized stress distribution to the supporting alveolar bone of abutment teeth and residual ridge under the vertical loads. The removable partial denture using flexible resin can be applied to the case that has a better state of residual ridge than abutment teeth.

새 정부에 바란다 - '신성장동력을 중심으로'

박철우,Park, Cheol-Woo 한국과학기술단체총연합회 2013 과학과 기술 Vol.526 No.-

방사선치료 암 환자의 대체요법 경험실태 조사연구

박철우,박태진,Park Cheol Woo,Park Tae-Jin 대한방사선치료학회 2001 大韓放射線治療技術學會誌 Vol.13 No.1

Although it is presumed that cancer patients take various alternative therapies, the present status is not well recognized. The purpose of this study is to survey alternative therapies used by cancer patients receiving radiation therapy and then, find associated factors of taking alternative therapies. The study subjects were composed of those who receiving radiation therapy in the department of radiation oncology in 5 hospitals located at Extended Busan city and who were on follow-up after medical cure. They were 394 male and female patients over 20 years old. The mean age of the subjects was 53.2 years old and the age ranged from 23 to 83 years old. 188 patients($47.7\%$) used alternative therapies. Total 68 different kinds of alterative therapies were used, average 7.3 kinds per patient were experienced, and average total cost expenditure was 2,830,000 won. Among the alternative therapies, black bean($38.8\%$) was the most commonly used and brown rice($38.3\%$), ganoderm lucidum($37.8\%$), elm tree($33.5\%$), and phellinus linteus($30.8\%$) were followed in order of frequency. However in considering the time, cost and effort spent, phellinus linteus was the first. In terms of cost, phellinus linteus was the highest with average expenditure of 2,740,000 won. Among the motivation of using alternative therapies, expecting auxiliary help for the hospital therapy was the highest ($31.4\%$). About half of users($56.9\%$) of alternative therapies were recommended by their relatives to use alternative therapies. In comparing the characteristics of experienced and unexperienced groups, alternative therapy was experienced significantly more in patients of younger age(p=0.001), in patient of higher educational level(p=0.001), and in patients of higher income(p=0.030) The proportion of using alternative therapies was significantly higher in the group treated with chemotherapy(p=0.005), and in the patients who did not satisfy with radiation therapy(p=0.001). The frequency of drinking was significantly higher tendency in the inexperienced group(p=0.046), There was no significant difference in marital status, job, religion, other disease, surgical operation of the cancer and smoking staus between the two groups. Among the unexperienced group, $34.0\%$ of the patients did not take the alternative therapies because they did not have know]edge for the alternatives, and $22.3\%$ worried about negative effects on hospital-based therapy $58.7\%$ of them were willing to take the alternative therapies if the effects and safety were proven by the government or research institutes. $21.9\%$ of the patients wanted to take the alternatives if they were affordable. $72.3\%$ of the patients was willing to take them if their families recommend, but $27.2\%$ responded they would not take them in any situation. Conclusively, various kinds of alternative therapies which were not proved medically were exposed to patients, In these circumstances, it is required to investigate, study and evaluate the medical effects and safety of the alternative therapies.

볼나사 그루브 상사비 결정에 관한 연구

박철우,김대은,이상조,Park, Cheol-U,Kim, Dae-Eun,Lee, Sang-Jo 대한기계학회 1996 大韓機械學會論文集A Vol.20 No.1

Ball screws are commonly used in linear motion feeding systems of various machine tools and automated systems. They are known to have relatively little backlash, high precision and efficiency compared to ordinary lead screws. Furthermore, the effectiveness of ball screw has made it the preferred choice of many newly developed high speed precision feeding units. The motivation of this work is to establish the groove edsigh basis of ball screws for the reduction of contact fatigue failure. In most instances, fatigue failure between ball and shaft groove is due to excessive contact pressure. Especially, the excessive load is causative of plastic flow below the contact surface, which can contribute to surface failure. But, in spite of small load, if groove conformity rate is large, contact pressure is increased and internal shear stress reach the yield value of the material. In such a point, the authors deal with design procedure for deciding the permissible conformity rate of a ball screw groove with the computational evaluation of contact pressure and maximum shear stress.

대기경계층 내에 놓인 실린더의 자유단 형상변화가 후류유동에 미치는 영향에 관한 연구

박철우,이상준,Park, Cheol-Woo,Lee, Sang-Joon 대한기계학회 2003 大韓機械學會論文集B Vol.27 No.1

The flow structure around the free end of a finite circular cylinder (FC) embedded in an atmospheric boundary layer (ABL) over open terrain was investigated experimentally with varying the free end shape. The experiments were carried out in a closed-return type subsonic wind tunnel. A finite cylinder with an aspect ratio (L/D) of 6 was mounted vertically on a long flat plate. The Reynolds number based on the cylinder diameter is about Re=7,500. The velocity fields near the FC free end were measured using the single-frame double-exposure PIV method. As a result, for the FC with a right-angled free end, there is a peculiar vortical structure, showing counter-rotating twin vortices near the FC free end. It is caused by the interaction between the entrained irrotational fluids from both sides of FC and the downwash flow from the FC free-end.

다공성 방풍펜스가 대기경계층내에 놓인 삼각프리즘 표면압력에 미치는 영향에 관한 연구

박철우,성승학,Park, Cheol-U,Seong, Seung-Hak 대한기계학회 1996 大韓機械學會論文集B Vol.20 No.8

Effeccs of porous wind fence on surface-pressure around 2-dimensional prism model of triangular cross-section were investigated experimentally. The pressure data were obtained at a Reynolds number based on the model height of Re=2.1*10$^{5}$ . Flow visualization also carried out to investigate the flow structure qualitatively. The mean velocity and turbulent intensity profiles measured at fence location were well fitted to the neutral atmospheric surface boundary layer over the open terrain. Various fences with different porosity and height were tested to investigate their effects on the surface pressure acting on a prism model at different locations. As the results, porous fence with porosity 40 ~ 50% is most effective for abating wind erosion. With decreasing porosity of the fence, pressure fluctuations on the model surface are increased. The mean pressure coefficients are decreased only when the fence height is greater than the model height. The effect of distance between wind fence and triangular prism was not significant, compared to that of the fence porosity and height.

하악 제1대구치 단일 수복을 위한 발치 즉시 임플란트의 임상증례

박철우,Park, Cheol-Woo 대한심미치과학회 2021 Journal of the Korean Academy of Esthetic Dentistr Vol.30 No.1

Immediate implantation is widely applied as it is recognized as a useful implant treatment in dental clinic due to its various advantages as well as being able to shorten the treatment period. Immediate implant treatment was performed on 5 patients who needed extraction of the mandibular first molar for various reasons, shortening the overall treatment period, and obtaining satisfactory results. Immediate implantation after extraction is a high-level treatment that requires proper initial fixation at the exact location of the extraction socket and the surrounding soft tissues, but is considered to be a clinically very useful prosthetic restoration method 발치 즉시 임플란트는 치료 기간을 단축할 수 있을 뿐만 아니라 여러 가지 장점으로 인해서 치과임상에서 유용한 임플란트 치료법으로 인식되면서 널리 적용되고 있다. 다양한 이유로 인해서 하악 제1대구치의 발치가 필요한 5명의 환자에게 발치 즉시 임플란트 치료를 진행하여 전체 치료 기간을 단축하면서 만족스러운 결과를 얻었다. 발치 즉시 임플란트는 발치와 내 정확한 위치에 적절한 초기고정을 얻어야 하고 주위 연조직도 개선해야 하는 고난도 치료법이지만 임상적으로 매우 유용한 보철 수복 방법이라고 판단된다.