http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
수경화성 폴리우레탄 도막 방수재의 물 혼합비에 따른 물성변화연구
박진상,박완구,김동범,이민규,오상근,Park, Jin-Sang,Park, Wan-Goo,Kim, Dong-Bum,Lee, Min-Kyu,Oh, Sang-Keun 한국건설순환자원학회 2015 한국건설순환자원학회 논문집 Vol.3 No.4
현재 국내에서 가장 많이 시공되고 있는 우레탄 방수재는 시공이 간편하고 이음매 없이 도막을 만들 수 있다는 장점을 가지고 있지만, 저온 및 낮은 습도에서 경화지연 및 도막 두께의 제한과 같은 결점이 있어서 현장 시공 시에 물을 강제적으로 혼합하여 경화시키는 방법인 수경화성 폴리우레탄 방수재가 해결방안으로 제시되고 있다. 하지만, 수경화성 폴리우레탄 방수재는 경화제로 사용하는 물 혼합비에 따라 방수성능 및 현장 시공성에 어떠한 영향을 주게 되는지에 대한 객관적이고 정량적인 평가가 없는 실정이다. 따라서 시공현장에서는 객관적인 기준 없이 작업자의 판단에 따라 물을 혼합하여 시공하고 있어서 일정한 성능과 품질을 얻을 수 없는 문제점이 있다. 따라서, 본 연구에서는 수경화성 폴리우레탄 방수재가 폭 넓게 적용되는 계기를 만들기 위하여, 물 혼합비에 따른 성능의 변화를 정량적인 근거를 바탕으로 평가, 분석하여 적정한 물 혼합비 제안을 위한 기초적 자료를 마련하기 위해 진행하였다. 연구의 방법은 수경화성 폴리우레탄 방수재의 물 혼합비(0%, 5%, 10%, 15%, 20%, 25%, 30%, 40%, 50%)에 따른 객관적 성능 평가를 통해 결과 값을 도출하고 비교 분석하여 혼합비별 물성변화 특성을 파악한 후 이를 데이터 베이스화 하여 가장 적정한 물 혼합비 제안을 위한 기초적인 자료로 활용 가능할 수 있도록 결과를 제시하였다. Urethane waterproofing materials which currently being used most commonly in the Korean domestic market have high applicability and construct layers without forming any joints, but under the influence of low temperature and low humidity, as well as the thickness of the applied layer, the curing time of this material may become extended in construction sites. To resolve these issues, a proposed method of using water-hardening type of polyurethane waterproofing materials are being developed. However, there currently lacks any standards or evaluation methods on determining an optimal mixture ratio of water for the water-hardening polyurethane waterproofing materials. Therefore, workers and construction workers are relying on their hands-on-skills and experience to determine this ratio and are not able to obtain a consistent performance quality out of these materials. Therefore, for the establishment of a board applicability of the water-hardening polyurethane waterproofing methods in construction sites, this study objectively analyzes the changes in the performance of these materials depending on the changes of the water mixture ratio and attempts to procure the optimal ratio on the basis of forming a provisionary standard. The study prepares mixtures of varying ratio(no water added, 5, 10, 15, 20, 25, 30, 40 and 50) and conducts comparative analysis respective mixtures' performances and their changes in the physical properties in an objective manner and proposes a provisional optimal value that can serve as a data base that can be used as a reference for future studies.
유 무기질 체질안료 입도 및 함량에 따른 아스팔트 매스틱 도막방수재의 누유 특성
박진상 ( Park Jin-sang ),김동범 ( Kim Dong-bum ),박완구 ( Park Wan-goo ),김영삼 ( Kim Young-sam ),신홍철 ( Shin Hong-chol ),오상근 ( Oh Sang-keun ) 한국건축시공학회 2021 한국건축시공학회지 Vol.21 No.1
본 연구에서는 아스팔트 매스틱 도막방수재를 구성하는 원료의 종류 및 함량을 조정하여 누유발생 특성을 분석함으로써 원료와 누유발생 간 특정 상관관계를 정량적으로 파악하는 것을 목적으로 하였다. 이를 위해 아스팔트 매스틱 도막방수재의 유·무기계 체질안료인 CA(탄산칼슘)와 ASE(침강방지제) 두 개 원료를 선정하였으며, 입도 및 함량을 변수로 설정하여 배합을 통해 샘플시료를 조성하고 샘플시료별점도 및 누유안정성(20℃, 40℃) 평가를 진행하였다. 평가결과, 누유안정성 및 점도는 CA 평균입도에 반비례하며, ASE 함량에 비례하는 상관관계가 성립하는 것을 정량적으로 증명하였다. 본 연구결과는 향후 아스팔트 매스틱 도막방수재의 누유 개선을 위한 배합 연구 시 기초 배합설계의 핵심적인 근거자료로서 활용이 가능할 것으로 판단된다. In this study, the purpose of this study was to quantitatively grasp the specific correlation between the raw material and the occurrence of leakage by analyzing the characteristics of leakage by adjusting the type and content of the raw material constituting the asphalt mastic coating waterproofing material. To this end, two raw materials, CA (calcium carbonate) and ASE (anti-sedimentation), which are organic and mineral extender for asphalt mastic waterproofing membrane coating, were selected. viscosity and oil leakage stability (20 ℃, 40 ℃) was evaluated. As a result of the evaluation, the oil leakage stability and viscosity were inversely proportional to the CA average particle size, and it was quantitatively proven that a correlation in proportion to the ASE content was established. The results of this study are expected to be used as core data for basic mixing design in the future mixing studies to improve leakage of asphalt mastic waterproofing membrane coating.