http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
채널 에러가 존재하는 RFID 시스템에서 효율적인 태그 추정 방법과 충돌 방지 방법
박종호(Jongho Park),이태진(Tae-Jin Lee) 대한전자공학회 2007 대한전자공학회 학술대회 Vol.2007 No.11
In RFID systems, a tag is easy to cause channel error. But anti-collision method in channel error condition have not been studied up to recently. In this paper, we propose an efficient estimation method and an effective tag anti-collision method in channel error condition. Simulation results show that the proposed estimation and anti-collision algorithm consumes 20-25% less time slots than the binary tree protocol and dynamic framed slotted ALOHA (DFSA) in channel error condition.
박종호(Jongho Park) 한국콘텐츠학회 2011 한국콘텐츠학회논문지 Vol.11 No.7
만약 다수의 스테레오그래퍼에게 어떻게 해야 좋은 입체 3D영화를 찍을 수 있느냐고 묻는다면 돌아오는 답은 모두 다를 것이다. 세상엔 3D와 관련한 많은 지식과 의견들이 존재하고, 때론 동의할 수 없는 것들도 있다. 우리 스스로 어떤 의견을 받아들일지를 결정해야 하고, 우리 자신의 작업 방식도 찾아야만 한다. 하지만 입체 영화란 시각적 차이와 상관없이 관객 모두에게 최소한의 편안함이 없다면 온전히 상영될 수 없을 것이다. 우선, 작업에 앞서 적절한 입체 장면을 얻기 위해서 우리는 항상 많은 요소들을 신중히 고려해야 한다. 이글의 목적은 입체 영화 작업의 실례를 제공하는데 있다. 앞으로 이와 관련한 주제에 대한 더 많은 연구가 이루어지는 계기가 되기를 바란다. If you ask many Stereographers how to make a good S3D and you will get all different answers. There are several 3D knowledges and opinions that were not always in agreement. we have to choose which advice to follow and find our own way. But there will be no durable screening of S3D films without a minimal viewing comfort of all the audience whatever the differences of their vision. First of all, We always consider several factors to get an appropriate S3D shot before moving on to production. This is intended to provide a practical example on S3D film production. I hope that this article will encourage further research on this topic.
CSMA/CA 기반 애드혹 네트워크에서 S-MPR을 이용한 효율적인 중계 노드 선택 알고리즘
박종호(Jongho Park),오창영(Chang-Yeong Oh),안지형(Ji Hyoung Ahn),서명환(Myunghwan Seo),조형원(Hyung-Weon Cho),이태진(Tae-Jin Lee) 한국통신학회 2012 韓國通信學會論文誌 Vol.37 No.8B
본 논문에서는 OLSR의 MPR 선택방법을 개선함으로써 애드혹(ad hoc) 네트워크의 처리율(throughput), 지연 시간(delay) 등의 성능을 향상시킬 수 있는 S-MPR 선택 방법을 제안한다. OLSR의 MPR 선택 방법은 각 노드가 독립적으로 MPR을 선택하기 때문에 대부분의 노드가 MPR로 선택되는 문제가 있다. 이러한 문제를 해결하기 위해 기존에 제안되었던 MPR 후보(candidate) 선택 방법은 MPR의 수는 감소시킬 수 있지만 그로 인해 경로의 효율성과 네트워크의 연결성(connectivity)이 저하되는 문제를 갖고 있다. 본 논문에서 제안하는 S-MPR 방법은 이러한 문제를 해결하기 위해 각 노드 입장에서 가장 중요한 노드를 S-MPR로 선택하고 나머지 MPR은 MPR 후보를 이용하여 선택하는 방법을 사용한다. 따라서 제안 방법은 경로 효율성의 저하를 최소화하면서 MPR로 선택되는 노드의 수를 줄임으로써 TC 메시지로 인한 오버헤드를 최소화하고 MPR간의 충돌을 감소시킴으로써 처리율, 지연 시간 성능을 향상시킬 수 있다. 본 논문에서 제안한 S-MPR의 성능을 알아보기 위해 OPNET을 활용하여 시뮬레이션을 수행하고 제안 S-MPR의 성능이 가장 우수함을 보인다. In the MPR selection algorithm of Optimized Link State Routing (OLSR), each node selects own MPRs independently, so most of nodes are selected to MPR at least once. To cope with this problem, the MPR candidate selection algorithm was proposed. The MPR candidate selection algorithm can reduce the number of MPRs, but the efficiencies of route and connectivity decline due to decreased number of MPRs. So, in this paper, we propose the Significant Multi-Point Relay (S-MPR) selection algorithm which can enhance the performance of ad hoc network by improving the MPR selection algorithm of OLSR. In proposed S-MPR selection algorithm, each node selects the most important node to S-MPR to guarantee the connectivity then selects remaining MPRs in MPR candidates. So proposed S-MPR selection algorithm can reduce the overhead of many MPRs without decline of routing performance. To show the performance gain of proposed S-MPR selection algorithm, we simulate the proposed S-MPR selection algorithm by using OPNET.
노드 이동성 및 분포를 고려한 향상된 다중 점 릴레이 선택 알고리즘
박종호(Jongho Park),오창영(Chang-Yeong Oh),안지형(Ji Hyoung Ahn),김정식(Joung-Sik Kim),정성헌(Sunghun Jung),이태진(Tae-Jin Lee) 한국통신학회 2012 韓國通信學會論文誌 Vol.37 No.12B
본 논문에서는 노드의 이동성이 크고 노드의 밀도가 균일 하지 않은 애드혹 네트워크에서 라우팅 성능을 개선하기 위해 노드의 이동성과 밀도를 고려하여 OLSR(Optimized Link State Routing) 의 MPR(Multi-Point Relay) 선택방법을 개선할 수 있는 방법을 제안한다. OLSR의 MPR 선택 방법은 노드의 이동성과 밀도에 무관하게 2홉 이웃 노드를 많이 포함하는 노드를 위주로 선택한다. 하지만 노드가 이동성을 갖는 경우에 이동성이 큰 노드를 MPR로 선택할 경우 성능이 저하될 수 있다. 또한 노드의 밀도가 균일 하지 않은 경우에는 밀도가 높은 지역의 노드들이 우선적으로 MPR로 선택되면 네트워크 전체의 성능을 향상시킬 수 있다. 따라서 본 논문에서는 노드의 이동성과 밀도를 Hello 메시지 교환을 통해 측정하고 노드의 이동성과 밀도를 반영하여 MPR 선택에 우선순위를 부여하는 방법을 제안한다. 본 논문에서 제안한 MPR 선택 방법의 성능을 알아보기 위해 OPNET을 활용하여 시뮬레이션을 수행하고 제안 방법의 성능이 가장 우수함을 보인다. In this paper, we propose an improved MPR selection method considering mobility and density of nodes for ad-hoc networks. In Optimized Link State Routing(OLSR), a node selects 1-hop Multi-Point Relay(MPR) nodes to cover all 2-hop neighbor nodes. In a high population area, many nodes are likely to be selected as MPR nodes by their neighbors. This leads to increase in contention among MPR nodes and may decrease overall performance of the network. In addition, when an MPR node leaves the communication range of its MPR selector node, it can no longer perform as the MPR node and the performance of the network may also decrease. In this paper, we propose an MPR selection method which measures the mobility and density of nodes by exchanging the hello messages and gives the priorities to the nodes for MPR selection. Performance evaluation results using OPNET show that the proposed method is superior to OLSR or the MPR candidate method in terms of connectivity and throughput.