http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
GPS(Glycidoxypropyl Trimethoxysilane)을 이용한 친수성 코팅 필름의 제조
박정국,송기창,강현욱,김성현 한국화학공학회 2002 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.40 No.6
고분자 필름의 무적성을 향상시키기 위하여 우수한 친수성 및 높은 가시광선 투과율을 보이는 유기-무기 혼성 코팅용액을 졸-겔법으로 합성하였다. 코팅용액은 입자 직경이 15㎚ 크기의 무기물인 콜로이드 실리카 용액(Ludox)에 유기 조성을 함유한 화합물인 GPS을 첨가하여 제조되었다. 실란 커플링제인 GPS는 콜로이드 실리카와 주변의 매트릭스(matrix)인 고분자 필름에 각각 강한 결합을 형성하여 두 개의 서로 다른 물질을 강하게 연결하는 결합제 역할을 한다. 강산성 조건 하에서 제조된 혼성 코팅용액으로 고분자 필름 위에 코팅한 경우는 코팅필름의 표면이 거의 균열이 없는 매끈한 미세구조를 보이는 반면, 약산과 염기성 조건 하에서 제조된 혼성 코팅용액으로 코팅한 경우에는 균열이 심한 미세구조를 보였다. 또한 pH 2의 산성 조건에서 제조한 필름은 우수한 친수성 및 높은 가시광선 투과율을 보인 반면, 염기성 조건으로 제조한 코팅필름은 친수성이 좋지 않았으며, 낮은 가시광선 투과율을 보였다. In order to improve the anti-fogging property of polymer films, organic-inorganic hybrid coating solutions which have good hydrophilic property and transmission in the range of visible light were synthesized by the sol-gel method. The coating solutions were prepared by adding glycidoxypropyl trimethoxysilane(GPS) to a colloidal silica(15㎚) suspension(Ludox). GPS as silane coupling agent forms strong bonds to the colloidal silica and surrounding polymer matrix and links two different materials together. Solutions prepared by addition of GPS at the acidic condition resulted in coatings that were less prone to cracking, while those at the basic condition caused coatings with more cracking. These resulted in better hydrophilic property and transmission in the range of visible light for the solution prepared at the acidic condition(pH 2). Compared with coatings under acidic conditions, coatings prepared at basic conditions showed worse hydrophilic property and transmission in the range of visible light.
Al-Mg-Si合金의 時效擧動에 미치는 加工熱處理의 影響
趙顯麒,李基大,朴定國 慶北大學校 1980 論文集 Vol.30 No.-
Effects of Thermo-Mechanical Treatment(TMT) on ageing behaviours in Al-Mg-Si alloy is investigated by means of tensile test, hardness measurements and transmission electron microscopy. The maximum 0.2% proof stress of the TMT materials in final ageing is higher by 10%∼20% than that of the two-step aged materials. The strength of TMT materials also increases more rapidly than that of two-step aged materials. The maximum 0.2% proof stress of the TMT materials with pre-ageing is higher than that of the TMT materials without pre-ageing. The strength of TMT materials increases with rising pre-ageing temperature, and it decreases with rising final-ageing temperature. Consequently, this type of TMT would have some practical significance in improving the mechanical properties of 6061 alloy.